Round 21 (three reported items).
1. A hashboard that is still mining near full hashrate but has some failed chips
now shows yellow (degraded), not red. VNish emits per-board chip failures as
Warning while the board is mining (Error only when the board is not mining),
and board_healths() renders a warning-only board as Degraded instead of Down.
Verified live on 10.4.0.193 (mining ~83%, dead chips -> yellow).
2. New "Power limit" column: the configured power-target setpoint in watts
(MinerRow.power_limit_w, from a Power tuning target). WhatsMiner shows its
"Power Limit" (e.g. 2500 W); the value was already scanned but had no dedicated
column. Numeric (sortable/filterable), Performance category, opt-in.
3. Chip + hashboard model coverage:
- VNish hashboard model scanned from factory-info board_model (A3HB70601,
BHB42603, ...) -- 147-unit fleet gains HB model. Both VNish backends.
- WhatsMiner v1/v2 PSU serial scanned from get_psu serial_no (was hardcoded
None). 48-unit fleet gains PSU serial.
- Chip type derived from the detected model for Antminer hardware (VNish/stock/
LuxOS/Braiins/UMC never report a chip string on the wire), in naming.rs:
S21Pro->BM1370, S19jPro->BM1362, S19KPro->BM1366, S19/T19->BM1398, etc.
Only high-confidence mappings; WhatsMiner and unknown models stay blank.
PSU Vmin/Vmax remain Braiins/ePIC-only (not on the wire for WhatsMiner/VNish/
Antminer -- confirmed live).
asic-rs patch 0033. 95 unit tests pass.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Djv3oncM4LxTS5tb61Ako6