- Credentials dialog: new "SSH (restore)" row for the control-board SSH login used by the Braiins restore-to-stock. The username defaults to root; the password is masked and never re-displayed, and a blank password keeps the saved one. Reset to defaults also clears it. ssh-credentials.txt no longer has to be written by hand. - Default scan range is now 192.168.1.1/24 (scans 192.168.1.0/24), and the range dialog's examples use that subnet. - Windows version info, zip README, LICENSE and docs name the publisher as on the signing certificate: BlueFlare Energy Solutions Inc. - Manual updated for all three. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
1.9 KiB
1.9 KiB
Getting started
Alkane Toolkit finds the ASIC miners on your network and shows them in one table: model, firmware, hashrate, power, temperatures, fans and the health of every hashboard. From the same table you can run the controls each miner's firmware supports, such as pausing, restarting or changing pools.
Download
Get the latest release from the downloads page.
| Platform | File | Notes |
|---|---|---|
| Windows 10 and 11 (x86_64) | alkane-toolkit-vX.Y.Z-windows-x86_64.zip |
One signed alkane-toolkit.exe; nothing to install |
| Linux (x86_64) | alkane-toolkit-vX.Y.Z-linux-x86_64.tar.gz |
One binary; needs GTK 3 (sudo apt install libgtk-3-0) |
Windows
- Download the zip, right-click it, choose Properties, tick Unblock if it is shown, then extract it.
- Run
alkane-toolkit.exe. Windows shows BlueFlare Energy Solutions Inc. as the verified publisher. To check the signature yourself, right-click the exe, choose Properties and open Digital Signatures.
Linux
tar xzf alkane-toolkit-vX.Y.Z-linux-x86_64.tar.gz
./alkane-toolkit-vX.Y.Z-linux-x86_64/alkane-toolkit
First run
The toolkit starts a scan as soon as it opens. Set your own ranges first with Scan ranges (see Scanning); until you do, it scans 192.168.1.0/24, the usual router subnet.
To look around without touching any miner, start it in demo mode. It shows a built-in sample fleet and simulates every action:
| Platform | Command |
|---|---|
| Windows (Command Prompt) | set ALKANE_FAKE_SCAN=1 && alkane-toolkit.exe |
| Linux | ALKANE_FAKE_SCAN=1 ./alkane-toolkit |
Where settings are kept
| Platform | Folder |
|---|---|
| Windows | %APPDATA%\alkane-toolkit |
| Linux | ~/.config/alkane-toolkit |
See Settings and credentials for the files in that folder. Deleting the folder resets the toolkit to its defaults.