# image: VERSION=0.17.79-rc BUILD_DATE=2026-10-28 GIT_COMMIT=417a66b FLAVOR=release KERNEL=6.18.46 KCONFIG_SHA256=7de6e4896da603e0993db36a261796abbb040fd6ac3733a39d163762e4fda27f SDK=/home/noah/projects/flare-edge/sdk 
# busybox: BusyBox v1.37.0 (2026-09-29 00:26:09 UTC) multi-call binary.
#
== [
== [[
== addgroup
Usage: addgroup [-g GID] [-S] GROUP
Add a group
	-g GID	Group id
	-S	Create a system group
== adduser
Usage: adduser [OPTIONS] USER [GROUP]
Create new user, or add USER to GROUP
	-h DIR		Home directory
	-g GECOS	GECOS field
	-s SHELL	Login shell
	-G GRP		Group
	-S		Create a system user
	-D		Don't assign a password
	-H		Don't create home directory
	-u UID		User id
	-k SKEL		Skeleton directory (/etc/skel)
== ar
Usage: ar x|p|t|r [-ov] ARCHIVE [FILE]...
Extract or list FILEs from an ar archive, or create it
	x	Extract
	p	Extract to stdout
	t	List
	r	Create
	-o	Restore mtime
	-v	Verbose
== arch
Usage: arch
Print system architecture
== arp
Usage: arp
[-vn]	[-H HWTYPE] [-i IF] -a [HOSTNAME]
[-v]		    [-i IF] -d HOSTNAME [pub]
[-v]	[-H HWTYPE] [-i IF] -s HOSTNAME HWADDR [temp]
[-v]	[-H HWTYPE] [-i IF] -s HOSTNAME HWADDR [netmask MASK] pub
[-v]	[-H HWTYPE] [-i IF] -Ds HOSTNAME IFACE [netmask MASK] pub
Manipulate ARP cache
	-a		Display (all) hosts
	-d		Delete ARP entry
	-s		Set new entry
	-v		Verbose
	-n		Don't resolve names
	-i IF		Network interface
	-D		Read HWADDR from IFACE
	-A,-p AF	Protocol family
	-H HWTYPE	Hardware address type
== arping
Usage: arping [-fqbDUA] [-c CNT] [-w TIMEOUT] [-I IFACE] [-s SRC_IP] DST_IP
Send ARP requests/replies
	-f		Quit on first ARP reply
	-q		Quiet
	-b		Keep broadcasting, don't go unicast
	-D		Exit with 1 if DST_IP replies
	-U		Unsolicited ARP mode, update your neighbors
	-A		ARP answer mode, update your neighbors
	-c N		Stop after sending N ARP requests
	-w TIMEOUT	Seconds to wait for ARP reply
	-I IFACE	Interface to use (default eth0)
	-s SRC_IP	Sender IP address
	DST_IP		Target IP address
== ascii
No help available
== ash
Usage: ash [-il] [-|+Cabefmnuvx] [-|+o OPT]... [-c 'SCRIPT' [ARG0 ARGS] | FILE ARGS | -s ARGS]
Unix shell interpreter
== awk
Usage: awk [OPTIONS] [AWK_PROGRAM] [FILE]...
	-v VAR=VAL	Set variable
	-F SEP		Use SEP as field separator
	-f/-E FILE	Read program from FILE
	-e AWK_PROGRAM
== base32
Usage: base32 [-d] [-w COL] [FILE]
Base32 encode or decode FILE to standard output
	-d	Decode data
	-w COL	Wrap lines at COL (default 76, 0 disables)
== base64
Usage: base64 [-d] [-w COL] [FILE]
Base64 encode or decode FILE to standard output
	-d	Decode data
	-w COL	Wrap lines at COL (default 76, 0 disables)
== basename
Usage: basename FILE [SUFFIX] | -a FILE... | -s SUFFIX FILE...
Strip directory path and SUFFIX from FILE
	-a		All arguments are FILEs
	-s SUFFIX	Remove SUFFIX (implies -a)
== bc
Usage: bc [-sqlw] [FILE]...
Arbitrary precision calculator
	-q	Quiet
	-l	Load standard library
	-s	Be POSIX compatible
	-w	Warn if extensions are used
$BC_LINE_LENGTH changes output width
== blkid
Usage: blkid [BLOCKDEV]...
Print UUIDs of all filesystems
== bunzip2
Usage: bunzip2 [-cfk] [FILE]...
Decompress FILEs (or stdin)
	-c	Write to stdout
	-f	Force
	-k	Keep input files
	-t	Test integrity
== bzcat
Usage: bzcat [FILE]...
Decompress to stdout
== cat
Usage: cat [-nbvteA] [FILE]...
Print FILEs to stdout
	-n	Number output lines
	-b	Number nonempty lines
	-v	Show nonprinting characters as ^x or M-x
	-t	...and tabs as ^I
	-e	...and end lines with $
	-A	Same as -vte
== chattr
Usage: chattr [-R] [-v VERSION] [-p PROJID] [-+=AacDdijsStTu] FILE...
Change ext2 file attributes
	-R	Recurse
	-v NUM	Set version/generation number
	-p NUM	Set project number
Modifiers:
	-,+,=	Remove/add/set attributes
Attributes:
	A	No atime
	a	Append only
	C	No copy-on-write
	c	Compressed
	D	Synchronous dir updates
	d	Don't backup with dump
	E	Encrypted
	e	File uses extents
	F	Case-insensitive dir
	I	Indexed dir
	i	Immutable
	j	Write data to journal first
	N	File is stored in inode
	P	Hierarchical project ID dir
	S	Synchronous file updates
	s	Zero storage when deleted
	T	Top of dir hierarchy
	t	Don't tail-merge with other files
	u	Allow undelete
	V	Verity
== chgrp
Usage: chgrp [-RhLHPcvf]... GROUP FILE...
Change the group membership of FILEs to GROUP
	-h	Affect symlinks instead of symlink targets
	-L	Traverse all symlinks to directories
	-H	Traverse symlinks on command line only
	-P	Don't traverse symlinks (default)
	-R	Recurse
	-c	List changed files
	-v	Verbose
	-f	Hide errors
== chmod
Usage: chmod [-Rcvf] MODE[,MODE]... FILE...
MODE is octal number (bit pattern sstrwxrwxrwx) or [ugoa]{+|-|=}[rwxXst]
	-R	Recurse
	-c	List changed files
	-v	Verbose
	-f	Hide errors
== chown
Usage: chown [-RhLHPcvf]... USER[:[GRP]] FILE...
Change the owner and/or group of FILEs to USER and/or GRP
	-h	Affect symlinks instead of symlink targets
	-L	Traverse all symlinks to directories
	-H	Traverse symlinks on command line only
	-P	Don't traverse symlinks (default)
	-R	Recurse
	-c	List changed files
	-v	Verbose
	-f	Hide errors
== chroot
Usage: chroot NEWROOT [PROG ARGS]
Run PROG with root directory set to NEWROOT
== chrt
Usage: chrt -m | -p [PRIO] PID | [-rfobi] PRIO PROG ARGS
Change scheduling priority and class for a process
	-m	Show min/max priorities
	-p	Operate on PID
	-r	Set SCHED_RR class
	-f	Set SCHED_FIFO class
	-o	Set SCHED_OTHER class
	-b	Set SCHED_BATCH class
	-i	Set SCHED_IDLE class
== chvt
Usage: chvt N
Change the foreground virtual terminal to /dev/ttyN
== cksum
Usage: cksum FILE...
Calculate CRC32 checksum of FILEs
== clear
Usage: clear
Clear screen
== cmp
Usage: cmp [-ls] [-n NUM] FILE1 [FILE2 [SKIP1 [SKIP2]]]
Compare FILE1 with FILE2 (or stdin)
	-l	Write the byte numbers (decimal) and values (octal)
		for all differing bytes
	-s	Quiet
	-n NUM	Compare at most NUM bytes
== cp
Usage: cp [-arPLHpfinlsTu] SOURCE DEST
or: cp [-arPLHpfinlsu] SOURCE... { -t DIRECTORY | DIRECTORY }
Copy SOURCEs to DEST
	-a	Same as -dpR
	-R,-r	Recurse
	-d,-P	Preserve symlinks (default if -R)
	-L	Follow all symlinks
	-H	Follow symlinks on command line
	-p	Preserve file attributes if possible
	-f	Overwrite
	-i	Prompt before overwrite
	-n	Don't overwrite
	-l,-s	Create (sym)links
	-T	Refuse to copy if DEST is a directory
	-t DIR	Copy all SOURCEs into DIR
	-u	Copy only newer files
== cpio
Usage: cpio [-dmvu] [-F FILE] [-R USER[:GRP]] [-ti] [EXTR_FILE]...
Extract (-i) or list (-t) files from a cpio archive on stdin
Main operation mode:
	-t	List
	-i	Extract EXTR_FILEs (or all)
Options:
	-d	Make leading directories
	-m	Restore mtime
	-v	Verbose
	-u	Overwrite
	-F FILE	Input (-t,-i,-p) or output (-o) file
	-R USER[:GRP]	Set owner of created files
	-L	Dereference symlinks
	-0	NUL terminated input
== crc32
Usage: crc32 FILE...
Calculate CRC32 checksum of FILEs
== crond
Usage: crond [-fbS] [-l N] [-L LOGFILE] [-c DIR]
	-f	Foreground
	-b	Background (default)
	-S	Log to syslog (default)
	-l N	Set log level. Most verbose 0, default 8
	-L FILE	Log to FILE
	-c DIR	Cron dir. Default:/var/spool/cron/crontabs
== crontab
Usage: crontab [-c DIR] [-u USER] [-ler]|[FILE]
	-c	Crontab directory
	-u	User
	-l	List crontab
	-e	Edit crontab
	-r	Delete crontab
	FILE	Replace crontab by FILE ('-': stdin)
== cut
Usage: cut [OPTIONS] [FILE]...
Print selected fields from FILEs to stdout
	-b LIST	Output only bytes from LIST
	-c LIST	Output only characters from LIST
	-d SEP	Field delimiter for input (default -f TAB, -F run of whitespace)
	-O SEP	Field delimeter for output (default = -d for -f, one space for -F)
	-D	Don't sort/collate sections or match -fF lines without delimeter
	-f LIST	Print only these fields (-d is single char)
	-F LIST	Print only these fields (-d is regex)
	-s	Output only lines containing delimiter
	-n	Ignored
== date
Usage: date [OPTIONS] [+FMT] [[-s] TIME]
Display time (using +FMT), or set time
	-u		Work in UTC (don't convert to local time)
	[-s] TIME	Set time to TIME
	-d TIME		Display TIME, not 'now'
	-D FMT		FMT (strptime format) for -s/-d TIME conversion
	-r FILE		Display last modification time of FILE
	-R		Output RFC-2822 date
	-I[SPEC]	Output ISO-8601 date
			SPEC=date (default), hours, minutes, seconds or ns
Recognized TIME formats:
	@seconds_since_1970
	hh:mm[:ss]
	[YYYY.]MM.DD-hh:mm[:ss]
	YYYY-MM-DD hh:mm[:ss]
	[[[[[YY]YY]MM]DD]hh]mm[.ss]
	'date TIME' form accepts MMDDhhmm[[YY]YY][.ss] instead
== dc
Usage: dc [-x] [-eSCRIPT]... [-fFILE]... [FILE]...
Tiny RPN calculator. Operations:
Arithmetic: + - * / % ^
~ - divide with remainder
| - modular exponentiation
v - square root
p - print top of the stack without popping
f - print entire stack
k - pop the value and set precision
i - pop the value and set input radix
o - pop the value and set output radix
Examples: dc -e'2 2 + p' -> 4, dc -e'8 8 * 2 2 + / p' -> 16
== dd
Usage: dd [if=FILE] [of=FILE] [ibs=N obs=N/bs=N] [count=N] [skip=N] [seek=N]
	[conv=notrunc|noerror|sync|fsync]
	[iflag=skip_bytes|count_bytes|fullblock|direct] [oflag=seek_bytes|append|direct]
Copy a file with converting and formatting
	if=FILE		Read from FILE instead of stdin
	of=FILE		Write to FILE instead of stdout
	bs=N		Read and write N bytes at a time
	ibs=N		Read N bytes at a time
	obs=N		Write N bytes at a time
	count=N		Copy only N input blocks
	skip=N		Skip N input blocks
	seek=N		Skip N output blocks
	conv=notrunc	Don't truncate output file
	conv=noerror	Continue after read errors
	conv=sync	Pad blocks with zeros
	conv=fsync	Physically write data out before finishing
	conv=swab	Swap every pair of bytes
	iflag=skip_bytes	skip=N is in bytes
	iflag=count_bytes	count=N is in bytes
	oflag=seek_bytes	seek=N is in bytes
	iflag=direct	O_DIRECT input
	oflag=direct	O_DIRECT output
	iflag=fullblock	Read full blocks
	oflag=append	Open output in append mode
	status=noxfer	Suppress rate output
	status=none	Suppress all output
N may be suffixed by c (1), w (2), b (512), kB (1000), k (1024), MB, M, GB, G
== deallocvt
Usage: deallocvt [N]
Deallocate unused virtual terminal /dev/ttyN
== delgroup
Usage: delgroup GROUP
Delete group GROUP from the system
== deluser
Usage: deluser [--remove-home] USER
Delete USER from the system
== devmem
Usage: devmem ADDRESS [WIDTH [VALUE]]
Read/write from physical address
	ADDRESS	Address to act upon
	WIDTH	Width (8/16/...)
	VALUE	Data to be written
== df
Usage: df [-PkmhT] [-t TYPE] [FILESYSTEM]...
Print filesystem usage statistics
	-P	POSIX output format
	-k	1024-byte blocks (default)
	-m	1M-byte blocks
	-h	Human readable (e.g. 1K 243M 2G)
	-T	Print filesystem type
	-t TYPE	Print only mounts of this type
== diff
Usage: diff [-abBdiNqrTstw] [-L LABEL] [-S FILE] [-U LINES] FILE1 FILE2
Compare files line by line and output the differences between them.
This implementation supports unified diffs only.
	-a	Treat all files as text
	-b	Ignore changes in the amount of whitespace
	-B	Ignore changes whose lines are all blank
	-d	Try hard to find a smaller set of changes
	-i	Ignore case differences
	-L	Use LABEL instead of the filename in the unified header
	-N	Treat absent files as empty
	-q	Output only whether files differ
	-r	Recurse
	-S	Start with FILE when comparing directories
	-T	Make tabs line up by prefixing a tab when necessary
	-s	Report when two files are the same
	-t	Expand tabs to spaces in output
	-U	Output LINES lines of context
	-w	Ignore all whitespace
== dirname
Usage: dirname FILENAME
Strip non-directory suffix from FILENAME
== dmesg
Usage: dmesg [-cr] [-n LEVEL] [-s SIZE]
Print or control the kernel ring buffer
	-c		Clear ring buffer after printing
	-n LEVEL	Set console logging level
	-s SIZE		Buffer size
	-r		Print raw message buffer
== dnsd
Usage: dnsd [-dvs] [-c CONFFILE] [-t TTL_SEC] [-p PORT] [-i ADDR]
Small static DNS server daemon
	-c FILE	Config file
	-t SEC	TTL
	-p PORT	Listen on PORT
	-i ADDR	Listen on ADDR
	-d	Daemonize
	-v	Verbose
	-s	Send successful replies only. Use this if you want
		to use /etc/resolv.conf with two nameserver lines:
			nameserver DNSD_SERVER
			nameserver NORMAL_DNS_SERVER
== dnsdomainname
No help available
== dos2unix
Usage: dos2unix [-ud] [FILE]
Convert FILE in-place from DOS to Unix format.
When no file is given, use stdin/stdout.
	-u	dos2unix
	-d	unix2dos
== du
Usage: du [-aHLdclsxhmk] [FILE]...
Summarize disk space used for FILEs (or directories)
	-a	Show file sizes too
	-b	Apparent size (including holes)
	-L	Follow all symlinks
	-H	Follow symlinks on command line
	-d N	Limit output to directories (and files with -a) of depth < N
	-c	Show grand total
	-l	Count sizes many times if hard linked
	-s	Display only a total for each argument
	-x	Skip directories on different filesystems
	-h	Sizes in human readable format (e.g., 1K 243M 2G)
	-m	Sizes in megabytes
	-k	Sizes in kilobytes (default)
== dumpkmap
Usage: dumpkmap > keymap
Print a binary keyboard translation table to stdout
== echo
== egrep
No help available
== eject
Usage: eject [-t] [-T] [DEVICE]
Eject DEVICE or default /dev/cdrom
	-t	Close tray
	-T	Open/close tray (toggle)
== env
Usage: env [-i0] [-u NAME]... [-] [NAME=VALUE]... [PROG ARGS]
Print current environment or run PROG after setting up environment
	-, -i	Start with empty environment
	-0	NUL terminated output
	-u NAME	Remove variable from environment
== ether-wake
Usage: ether-wake [-b] [-i IFACE] [-p aa:bb:cc:dd[:ee:ff]/a.b.c.d] MAC
Send a magic packet to wake up sleeping machines.
MAC must be a station address (00:11:22:33:44:55) or
a hostname with a known 'ethers' entry.
	-b		Broadcast the packet
	-i IFACE	Interface to use (default eth0)
	-p PASSWORD	Append four or six byte PASSWORD to the packet
== expr
Usage: expr EXPRESSION
Print the value of EXPRESSION
EXPRESSION may be:
	ARG1 | ARG2	ARG1 if it is neither null nor 0, otherwise ARG2
	ARG1 & ARG2	ARG1 if neither argument is null or 0, otherwise 0
	ARG1 < ARG2	1 if ARG1 is less than ARG2, else 0. Similarly:
	ARG1 <= ARG2
	ARG1 = ARG2
	ARG1 != ARG2
	ARG1 >= ARG2
	ARG1 > ARG2
	ARG1 + ARG2	Sum of ARG1 and ARG2. Similarly:
	ARG1 - ARG2
	ARG1 * ARG2
	ARG1 / ARG2
	ARG1 % ARG2
	STRING : REGEXP		Anchored pattern match of REGEXP in STRING
	match STRING REGEXP	Same as STRING : REGEXP
	substr STRING POS LEN	Substring of STRING, POS counts from 1
	index STRING CHARS	Index in STRING where any CHARS is found, or 0
	length STRING		Length of STRING
	quote TOKEN		Interpret TOKEN as a string, even if
				it is a keyword like 'match' or an
				operator like '/'
	(EXPRESSION)		Value of EXPRESSION
Beware that many operators need to be escaped or quoted for shells.
Comparisons are arithmetic if both ARGs are numbers, else
lexicographical. Pattern matches return the string matched between
\( and \) or null; if \( and \) are not used, they return the number
of characters matched or 0.
== factor
Usage: factor [NUMBER]...
Print prime factors
== fallocate
Usage: fallocate [-o OFS] -l LEN FILE
Preallocate space for FILE
	-o OFS	Offset of range
	-l LEN	Length of range
== false
== fbset
Usage: fbset [OPTIONS] [MODE]
Show and modify frame buffer settings
== fdflush
Usage: fdflush DEVICE
Force floppy disk drive to detect disk change
== fdformat
Usage: fdformat [-n] DEVICE
Format floppy disk
	-n	Don't verify after format
== fdisk
Usage: fdisk [-ul] [-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK
Change partition table
	-u		Start and End are in sectors (instead of cylinders)
	-l		Show partition table for each DISK, then exit
	-b 2048		(for certain MO disks) use 2048-byte sectors
	-C CYLINDERS	Set number of cylinders/heads/sectors
	-H HEADS	Typically 255
	-S SECTORS	Typically 63
== fgrep
No help available
== find
Usage: find [-HL] [PATH]... [OPTIONS] [ACTIONS]
Search for files and perform actions on them.
First failed action stops processing of current file.
Defaults: PATH is current directory, action is '-print'
	-L,-follow	Follow symlinks
	-H		...on command line only
	-xdev		Don't descend directories on other filesystems
	-maxdepth N	Descend at most N levels. -maxdepth 0 applies
			actions to command line arguments only
	-mindepth N	Don't act on first N levels
	-depth		Act on directory *after* traversing it
Actions:
	( ACTIONS )	Group actions for -o / -a
	! ACT		Invert ACT's success/failure
	ACT1 [-a] ACT2	If ACT1 fails, stop, else do ACT2
	ACT1 -o ACT2	If ACT1 succeeds, stop, else do ACT2
			Note: -a has higher priority than -o
	-name PATTERN	Match file name (w/o directory name) to PATTERN
	-iname PATTERN	Case insensitive -name
	-path PATTERN	Match path to PATTERN
	-ipath PATTERN	Case insensitive -path
	-regex PATTERN	Match path to regex PATTERN
	-type X		File type is X (one of: f,d,l,b,c,s,p)
	-executable	File is executable
	-perm MASK	At least one mask bit (+MASK), all bits (-MASK),
			or exactly MASK bits are set in file's mode
	-mtime DAYS	mtime is greater than (+N), less than (-N),
			or exactly N days in the past
	-atime DAYS	atime +N/-N/N days in the past
	-ctime DAYS	ctime +N/-N/N days in the past
	-mmin MINS	mtime is greater than (+N), less than (-N),
			or exactly N minutes in the past
	-amin MINS	atime +N/-N/N minutes in the past
	-cmin MINS	ctime +N/-N/N minutes in the past
	-newer FILE	mtime is more recent than FILE's
	-samefile FILE	File is same as FILE
	-user NAME/ID	File is owned by given user
	-group NAME/ID	File is owned by given group
	-size N[bck]	File size is N (c:bytes,k:kbytes,b:512 bytes(def.))
			+/-N: file size is bigger/smaller than N
	-empty		Match empty file/directory
	-prune		If current file is directory, don't descend into it
If none of the following actions is specified, -print is assumed
	-print		Print file name
	-print0		Print file name, NUL terminated
	-exec CMD ARG ;	Run CMD with all instances of {} replaced by
			file name. Fails if CMD exits with nonzero
	-exec CMD ARG + Run CMD with {} replaced by list of file names
	-ok CMD ARG ;   Prompt and run CMD with {} replaced
	-quit		Exit
== flock
Usage: flock [-sxun] FD | { FILE [-c] PROG ARGS }
[Un]lock file descriptor, or lock FILE, run PROG
	-s	Shared lock
	-x	Exclusive lock (default)
	-u	Unlock FD
	-n	Fail rather than wait
== fold
Usage: fold [-bs] [-w WIDTH] [FILE]...
Wrap input lines in FILEs (or stdin), writing to stdout
	-b	Count bytes rather than columns
	-s	Break at spaces
	-w	Use WIDTH columns instead of 80
== free
Usage: free [-bkmgh]
Display free and used memory
== freeramdisk
Usage: freeramdisk DEVICE
Free all memory used by the specified ramdisk
== fsck
Usage: fsck [-ANPRTV] [-t FSTYPE] [FS_OPTS] [BLOCKDEV]...
Check and repair filesystems
	-A	Walk /etc/fstab and check all filesystems
	-N	Don't execute, just show what would be done
	-P	With -A, check filesystems in parallel
	-R	With -A, skip the root filesystem
	-T	Don't show title on startup
	-V	Verbose
	-t TYPE	List of filesystem types to check
== fsfreeze
Usage: fsfreeze --[un]freeze MOUNTPOINT
Flush and halt writes to MOUNTPOINT
== fstrim
Usage: fstrim [OPTIONS] MOUNTPOINT
	-o OFFSET	Offset in bytes to discard from
	-l LEN		Bytes to discard
	-m MIN		Minimum extent length
	-v		Print number of discarded bytes
== fuser
Usage: fuser [-msk46] [-SIGNAL] FILE or PORT/PROTO
Find processes which use FILEs or PORTs
	-m	Find processes which use same fs as FILEs
	-4,-6	Search only IPv4/IPv6 space
	-s	Don't display PIDs
	-k	Kill found processes
	-SIGNAL	Signal to send (default: KILL)
== getfattr
Usage: getfattr [-h] {-d|-n ATTR} FILE...
Get extended attributes
	-h		Do not follow symlinks
	-d		Dump all attributes
	-n ATTR		Get attribute ATTR
== getopt
Usage: getopt [OPTIONS] [--] OPTSTRING PARAMS
	-a		Allow long options starting with single -
	-l LOPT[,...]	Long options to recognize
	-n PROGNAME	The name under which errors are reported
	-o OPTSTRING	Short options to recognize
	-q		No error messages on unrecognized options
	-Q		No normal output
	-s SHELL	Set shell quoting conventions
	-T		Version test (exits with 4)
	-u		Don't quote output
Example:
O=`getopt -l bb: -- ab:c:: "$@"` || exit 1
eval set -- "$O"
while true; do
	case "$1" in
	-a)	echo A; shift;;
	-b|--bb) echo "B:'$2'"; shift 2;;
	-c)	case "$2" in
		"")	echo C; shift 2;;
		*)	echo "C:'$2'"; shift 2;;
		esac;;
	--)	shift; break;;
	*)	echo Error; exit 1;;
	esac
done
== getty
Usage: getty [OPTIONS] BAUD_RATE[,BAUD_RATE]... TTY [TERMTYPE]
Open TTY, prompt for login name, then invoke /bin/login
	-h		Enable hardware RTS/CTS flow control
	-L		Set CLOCAL (ignore Carrier Detect state)
	-m		Get baud rate from modem's CONNECT status message
	-n		Don't prompt for login name
	-w		Wait for CR or LF before sending /etc/issue
	-i		Don't display /etc/issue
	-f ISSUE_FILE	Display ISSUE_FILE instead of /etc/issue
	-l LOGIN	Invoke LOGIN instead of /bin/login
	-t SEC		Terminate after SEC if no login name is read
	-I INITSTR	Send INITSTR before anything else
	-H HOST		Log HOST into the utmp file as the hostname
BAUD_RATE of 0 leaves it unchanged
== grep
Usage: grep [-HhnlLoqvsrRiwFE] [-m N] [-A|B|C N] { PATTERN | -e PATTERN... | -f FILE... } [FILE]...
Search for PATTERN in FILEs (or stdin)
	-H	Add 'filename:' prefix
	-h	Do not add 'filename:' prefix
	-n	Add 'line_no:' prefix
	-l	Show only names of files that match
	-L	Show only names of files that don't match
	-c	Show only count of matching lines
	-o	Show only the matching part of line
	-q	Quiet. Return 0 if PATTERN is found, 1 otherwise
	-v	Select non-matching lines
	-s	Suppress open and read errors
	-r	Recurse
	-R	Recurse and dereference symlinks
	-i	Ignore case
	-w	Match whole words only
	-x	Match whole lines only
	-F	PATTERN is a literal (not regexp)
	-E	PATTERN is an extended regexp
	-m N	Match up to N times per file
	-A N	Print N lines of trailing context
	-B N	Print N lines of leading context
	-C N	Same as '-A N -B N'
	-e PTRN	Pattern to match
	-f FILE	Read pattern from file
== gunzip
Usage: gunzip [-cfkt] [FILE]...
Decompress FILEs (or stdin)
	-c	Write to stdout
	-f	Force
	-k	Keep input files
	-t	Test integrity
== gzip
Usage: gzip [-cfkdt] [FILE]...
Compress FILEs (or stdin)
	-d	Decompress
	-c	Write to stdout
	-f	Force
	-k	Keep input files
	-t	Test integrity
== halt
Usage: halt [-d DELAY] [-nfw]
Halt the system
	-d SEC	Delay interval
	-n	Do not sync
	-f	Force (don't go through init)
	-w	Only write a wtmp record
== hdparm
Usage: hdparm [OPTIONS] [DEVICE]
	-a	Get/set fs readahead
	-A	Set drive read-lookahead flag (0/1)
	-b	Get/set bus state (0 == off, 1 == on, 2 == tristate)
	-B	Set Advanced Power Management setting (1-255)
	-c	Get/set IDE 32-bit IO setting
	-C	Check IDE power mode status
	-D	Enable/disable drive defect-mgmt
	-f	Flush buffer cache for device on exit
	-g	Display drive geometry
	-h	Display terse usage information
	-i	Display drive identification
	-I	Detailed/current information directly from drive
	-k	Get/set keep_settings_over_reset flag (0/1)
	-K	Set drive keep_features_over_reset flag (0/1)
	-L	Set drive doorlock (0/1) (removable harddisks only)
	-m	Get/set multiple sector count
	-n	Get/set ignore-write-errors flag (0/1)
	-p	Set PIO mode on IDE interface chipset (0,1,2,3,4,...)
	-P	Set drive prefetch count
	-Q	Get/set DMA tagged-queuing depth (if supported)
	-r	Get/set readonly flag (DANGEROUS to set)
	-S	Set standby (spindown) timeout
	-t	Perform device read timings
	-T	Perform cache read timings
	-u	Get/set unmaskirq flag (0/1)
	-v	Defaults; same as -mcudkrag for IDE drives
	-V	Display program version and exit immediately
	-W	Set drive write-caching flag (0/1) (DANGEROUS)
	-X	Set IDE xfer mode (DANGEROUS)
	-y	Put IDE drive in standby mode
	-Y	Put IDE drive to sleep
	-Z	Disable Seagate auto-powersaving mode
	-z	Reread partition table
== head
Usage: head [OPTIONS] [FILE]...
Print first 10 lines of FILEs (or stdin).
With more than one FILE, precede each with a filename header.
	-n N[bkm]	Print first N lines
	-n -N[bkm]	Print all except N last lines
	-c [-]N[bkm]	Print first N bytes
			(b:*512 k:*1024 m:*1024^2)
	-q		Never print headers
	-v		Always print headers
== hexdump
Usage: hexdump [-bcdoxCv] [-e FMT] [-f FMT_FILE] [-n LEN] [-s OFS] [FILE]...
Display FILEs (or stdin) in a user specified format
	-b		1-byte octal display
	-c		1-byte character display
	-d		2-byte decimal display
	-o		2-byte octal display
	-x		2-byte hex display
	-C		hex+ASCII 16 bytes per line
	-v		Show all (no dup folding)
	-e FORMAT_STR	Example: '16/1 "%02x|""\n"'
	-f FORMAT_FILE
	-n LENGTH	Show only first LENGTH bytes
	-s OFFSET	Skip OFFSET bytes
== hexedit
Usage: hexedit FILE
Edit FILE in hexadecimal
== hostid
Usage: hostid
Print out a unique 32-bit identifier for the machine
== hostname
Usage: hostname [-sidf] [HOSTNAME | -F FILE]
Show or set hostname or DNS domain name
	-s	Short
	-i	Addresses for the hostname
	-d	DNS domain name
	-f	Fully qualified domain name
	-F FILE	Use FILE's content as hostname
== hwclock
Usage: hwclock [-ul] [-f DEV] [-s|-w|--systz|--param-get PARAM|--param-set PARAM=VAL]
Show or set hardware clock (RTC)
	-f DEV	Use this device (e.g. /dev/rtc2)
	-u	Assume RTC is kept in UTC
	-l	Assume RTC is kept in local time
		(if neither is given, read from /var/lib/hwclock/adjtime)
	-s	Set system time from RTC
	-w	Set RTC from system time
	--systz	Set in-kernel timezone, correct system time
		if RTC is kept in local time
	--param-get PARAM	Get RTC parameter
	--param-set PARAM=VAL	Set RTC parameter
== i2cdetect
Usage: i2cdetect -l | -F I2CBUS | [-ya] [-q|-r] I2CBUS [FIRST LAST]
Detect I2C chips
	-l	List installed buses
	-F BUS#	List functionalities on this bus
	-y	Disable interactive mode
	-a	Force scanning of non-regular addresses
	-q	Use smbus quick write commands for probing (default)
	-r	Use smbus read byte commands for probing
	FIRST and LAST limit probing range
== i2cdump
Usage: i2cdump [-fy] [-r FIRST-LAST] BUS ADDR [MODE]
Examine I2C registers
	I2CBUS	I2C bus number
	ADDRESS	0x03-0x77
MODE is:
	b	Byte (default)
	w	Word
	W	Word on even register addresses
	i	I2C block
	s	SMBus block
	c	Consecutive byte
	Append p for SMBus PEC
	-f	Force access
	-y	Disable interactive mode
	-r	Limit the number of registers being accessed
== i2cget
Usage: i2cget [-fy] BUS CHIP-ADDRESS [DATA-ADDRESS [MODE]]
Read from I2C/SMBus chip registers
	I2CBUS	I2C bus number
	ADDRESS	0x03-0x77
MODE is:
	b	Read byte data (default)
	w	Read word data
	c	Write byte/read byte
	Append p for SMBus PEC
	-f	Force access
	-y	Disable interactive mode
== i2cset
Usage: i2cset [-fy] [-m MASK] BUS CHIP-ADDRESS DATA-ADDRESS [VALUE] ... [MODE]
Set I2C registers
	I2CBUS	I2C bus number
	ADDRESS	0x03-0x77
MODE is:
	c	Byte, no value
	b	Byte data (default)
	w	Word data
	i	I2C block data
	s	SMBus block data
	Append p for SMBus PEC
	-f	Force access
	-y	Disable interactive mode
	-r	Read back and compare the result
	-m MASK	Mask specifying which bits to write
== i2ctransfer
Usage: i2ctransfer [-fay] I2CBUS { rLENGTH[@ADDR] | wLENGTH[@ADDR] DATA...}...
Read/write I2C data in one transfer
	-f	Force access to busy addresses
	-a	Force access to non-regular addresses
	-y	Disable interactive mode
== id
Usage: id [-ugGnr] [USER]
Print information about USER or the current user
	-u	User ID
	-g	Group ID
	-G	Supplementary group IDs
	-n	Print names instead of numbers
	-r	Print real ID instead of effective ID
== ifconfig
Usage: ifconfig [-a] [IFACE] [ADDRESS]
Configure a network interface
	[add ADDRESS[/PREFIXLEN]]
	[del ADDRESS[/PREFIXLEN]]
	[[-]broadcast [ADDRESS]] [[-]pointopoint [ADDRESS]]
	[netmask ADDRESS] [dstaddr ADDRESS]
	[outfill NN] [keepalive NN]
	[hw ether|infiniband ADDRESS] [metric NN] [mtu NN]
	[[-]trailers] [[-]arp] [[-]allmulti]
	[multicast] [[-]promisc] [txqueuelen NN] [[-]dynamic]
	[mem_start NN] [io_addr NN] [irq NN]
	[up|down] ...
== ifdown
Usage: ifdown [-nmvf] [-i FILE] -a | IFACE...
	-a	Deconfigure all interfaces
	-i FILE	Use FILE instead of /etc/network/interfaces
	-n	Dry run
		(note: doesn't disable mappings)
	-m	Don't run any mappings
	-v	Print out what would happen before doing it
	-f	Force
== ifup
Usage: ifup [-nmvf] [-i FILE] -a | IFACE...
	-a	Configure all interfaces
	-i FILE	Use FILE instead of /etc/network/interfaces
	-n	Dry run
		(note: doesn't disable mappings)
	-m	Don't run any mappings
	-v	Print out what would happen before doing it
	-f	Force
== inetd
Usage: inetd [-fe] [-q N] [-R N] [CONFFILE]
Listen for network connections and launch programs
	-f	Run in foreground
	-e	Log to stderr
	-q N	Socket listen queue (default 128)
	-R N	Pause services after N connects/min
		(default 0 - disabled)
	Default CONFFILE is /etc/inetd.conf
== init
Usage: init
Init is the first process started during boot. It never exits.
It (re)spawns children according to /etc/inittab.
Signals:
HUP: reload /etc/inittab
TSTP: stop respawning until CONT
QUIT: re-exec another init
USR1/TERM/USR2/INT: run halt/reboot/poweroff/Ctrl-Alt-Del script
== insmod
Usage: insmod FILE [SYMBOL=VALUE]...
Load kernel module
== install
Usage: install [-cdDsp] [-o USER] [-g GRP] [-m MODE] [-t DIR] [SOURCE]... DEST
Copy files and set attributes
	-c	Just copy (default)
	-d	Create directories
	-D	Create leading target directories
	-s	Strip symbol table
	-p	Preserve date
	-o USER	Set ownership
	-g GRP	Set group ownership
	-m MODE	Set permissions
	-t DIR	Install to DIR
== ip
Usage: ip [OPTIONS] address|route|link|tunnel|neigh|rule [ARGS]
OPTIONS := -f[amily] inet|inet6|link | -o[neline]
ip addr add|del IFADDR dev IFACE | show|flush [dev IFACE] [to PREFIX]
ip route list|flush|add|del|change|append|replace|test ROUTE
ip link set IFACE [up|down] [arp on|off] [multicast on|off]
	[promisc on|off] [mtu NUM] [name NAME] [qlen NUM] [address MAC]
	[master IFACE | nomaster] [netns PID] [type TYPE ARGS]
ip tunnel add|change|del|show [NAME]
	[mode ipip|gre|sit] [remote ADDR] [local ADDR] [ttl TTL]
ip neigh show|flush [to PREFIX] [dev DEV] [nud STATE]
ip rule [list] | add|del SELECTOR ACTION
== ipaddr
Usage: ipaddr add|del IFADDR dev IFACE | show|flush [dev IFACE] [to PREFIX]
ipaddr add|change|replace|delete dev IFACE [CONFFLAG-LIST] IFADDR
	IFADDR := PREFIX | ADDR peer PREFIX [broadcast ADDR|+|-]
		[anycast ADDR] [label STRING] [scope SCOPE]
	PREFIX := ADDR[/MASK]
	SCOPE := [host|link|global|NUMBER]
	CONFFLAG-LIST := [CONFFLAG-LIST] CONFFLAG
	CONFFLAG := [noprefixroute]
ipaddr show|flush [dev IFACE] [scope SCOPE] [to PREFIX] [label PATTERN]
== ipcrm
Usage: ipcrm [-MQS key] [-mqs id]
Upper-case options MQS remove an object by shmkey value.
Lower-case options remove an object by shmid value.
	-mM	Remove memory segment after last detach
	-qQ	Remove message queue
	-sS	Remove semaphore
== ipcs
Usage: ipcs [[-smq] -i SHMID] | [[-asmq] [-tcplu]]
	-i ID	Show specific resource
Resource specification:
	-m	Shared memory segments
	-q	Message queues
	-s	Semaphore arrays
	-a	All (default)
Output format:
	-t	Time
	-c	Creator
	-p	Pid
	-l	Limits
	-u	Summary
== iplink
Usage: iplink set IFACE [up|down] [arp on|off] [multicast on|off]
	[promisc on|off] [mtu NUM] [name NAME] [qlen NUM] [address MAC]
	[master IFACE | nomaster] [netns PID] [type TYPE ARGS]
iplink add [link IFACE] IFACE [address MAC] type TYPE [ARGS]
iplink delete IFACE type TYPE [ARGS]
	TYPE ARGS := vlan VLANARGS | vrf table NUM | can CANARGS
	VLANARGS := id VLANID [protocol 802.1q|802.1ad] [reorder_hdr on|off]
		[gvrp on|off] [mvrp on|off] [loose_binding on|off]
	CANARGS := [bitrate BITRATE [sample-point SAMPLE-POINT]] |
		[tq TQ prop-seg PROP_SEG phase-seg1 PHASE-SEG1
		phase-seg2 PHASE-SEG2 [sjw SJW]]
		[dbitrate BITRATE [dsample-point SAMPLE-POINT]] |
		[dtq TQ dprop-seg PROP_SEG dphase-seg1 PHASE-SEG1
		dphase-seg2 PHASE-SEG2 [dsjw SJW]]
		[loopback on|off] [listen-only on|off] [triple-sampling on|off]
		[one-shot on|off] [berr-reporting on|off]
		[fd on|off] [fd-non-iso on|off] [presume-ack on|off]
		[restart-ms TIME-MS] [restart]
		[termination 0..65535]
iplink show [IFACE]
== ipneigh
Usage: ipneigh show|flush [to PREFIX] [dev DEV] [nud STATE]
== iproute
Usage: iproute list|flush|add|del|change|append|replace|test ROUTE
iproute list|flush SELECTOR
	SELECTOR := [root PREFIX] [match PREFIX] [proto RTPROTO]
	PREFIX := default|ADDR[/MASK]
iproute get ADDR [from ADDR iif IFACE]
	[oif IFACE] [tos TOS]
iproute add|del|change|append|replace|test ROUTE
	ROUTE := NODE_SPEC [INFO_SPEC]
	NODE_SPEC := PREFIX [table TABLE_ID] [proto RTPROTO] [scope SCOPE] [metric METRIC]
	INFO_SPEC := NH OPTIONS
	NH := [via [inet|inet6] ADDR] [dev IFACE] [src ADDR] [onlink]
	OPTIONS := [mtu [lock] NUM] [advmss [lock] NUM]
== iprule
Usage: iprule [list] | add|del SELECTOR ACTION
	SELECTOR := [from PREFIX] [to PREFIX] [tos TOS] [fwmark FWMARK[/MASK]]
			[dev IFACE] [pref NUMBER]
	ACTION := [table TABLE_ID] [nat ADDR]
			[prohibit|reject|unreachable]
			[realms [SRCREALM/]DSTREALM]
	TABLE_ID := [local|main|default|NUMBER]
== iptunnel
Usage: iptunnel add|change|del|show [NAME]
	[mode ipip|gre|sit] [remote ADDR] [local ADDR] [ttl TTL]
iptunnel add|change|del|show [NAME]
	[mode ipip|gre|sit] [remote ADDR] [local ADDR]
	[[i|o]seq] [[i|o]key KEY] [[i|o]csum]
	[ttl TTL] [tos TOS] [[no]pmtudisc] [dev PHYS_DEV]
== kill
Usage: kill [-l] [-SIG] PID...
Send a signal (default: TERM) to given PIDs
	-l	List all signal names and numbers
== killall
Usage: killall [-lq] [-SIG] PROCESS_NAME...
Send a signal (default: TERM) to given processes
	-l	List all signal names and numbers
	-q	Don't complain if no processes were killed
== killall5
Usage: killall5 [-l] [-SIG] [-o PID]...
Send a signal (default: TERM) to all processes outside current session
	-l	List all signal names and numbers
	-o PID	Don't signal this PID
== klogd
Usage: klogd [-c N] [-n]
Log kernel messages to syslog
	-c N	Print to console messages more urgent than prio N (1-8)
	-n	Run in foreground
== last
Usage: last
Show listing of the last users that logged into the system
== less
Usage: less [-EFIMmNSRh~] [FILE]...
View FILE (or stdin) one screenful at a time
	-E	Quit once the end of a file is reached
	-F	Quit if entire file fits on first screen
	-I	Ignore case in all searches
	-M,-m	Display status line with line numbers
		and percentage through the file
	-N	Prefix line number to each line
	-S	Truncate long lines
	-R	Remove color escape codes in input
	-~	Suppress ~s displayed past EOF
== link
Usage: link FILE LINK
Create hard LINK to FILE
== linux32
No help available
== linux64
No help available
== linuxrc
No help available
== ln
Usage: ln [-sfnbtv] [-S SUF] TARGET... LINK|DIR
Create a link LINK or DIR/TARGET to the specified TARGET(s)
	-s	Make symlinks instead of hardlinks
	-f	Remove existing destinations
	-n	Don't dereference symlinks - treat like normal file
	-b	Make a backup of the target (if exists) before link operation
	-S SUF	Use suffix instead of ~ when making backup files
	-T	Treat LINK as a file, not DIR
	-v	Verbose
== loadfont
Usage: loadfont < font
Load a console font from stdin
== loadkmap
Usage: loadkmap < keymap
Load a binary keyboard translation table from stdin
== logger
Usage: logger [-s] [-t TAG] [-p PRIO] [MESSAGE]
Write MESSAGE (or stdin) to syslog
	-s	Log to stderr as well as the system log
	-t TAG	Log using the specified tag (defaults to user name)
	-p PRIO	Priority (number or FACILITY.LEVEL pair)
== login
Usage: login [-p] [-h HOST] [[-f] USER]
Begin a new session on the system
	-f	Don't authenticate (user already authenticated)
	-h HOST	Host user came from (for network logins)
	-p	Preserve environment
$LOGIN_TIMEOUT		Seconds (default 60, 0 - disable)
== logname
Usage: logname
Print the name of the current user
== losetup
Usage: losetup [-rP] [-o OFS] {-f|LOOPDEV} FILE: associate loop devices
	losetup -c LOOPDEV: reread file size
	losetup -d LOOPDEV: disassociate
	losetup -a: show status
	losetup -f: show next free loop device
	-o OFS	Start OFS bytes into FILE
	-P	Scan for partitions
	-r	Read-only
	-f	Show/use next free loop device
== ls
Usage: ls [-1AaCxdLHRFplinshrSXvctu] [-w WIDTH] [FILE]...
List directory contents
	-1	One column output
	-a	Include names starting with .
	-A	Like -a, but exclude . and ..
	-x	List by lines
	-d	List directory names, not contents
	-L	Follow symlinks
	-H	Follow symlinks on command line
	-R	Recurse
	-p	Append / to directory names
	-F	Append indicator (one of */=@|) to names
	-l	Long format
	-i	List inode numbers
	-n	List numeric UIDs and GIDs instead of names
	-s	List allocated blocks
	-lc	List ctime
	-lu	List atime
	--full-time	List full date/time
	-h	Human readable sizes (1K 243M 2G)
	--group-directories-first
	-S	Sort by size
	-X	Sort by extension
	-v	Sort by version
	-t	Sort by mtime
	-tc	Sort by ctime
	-tu	Sort by atime
	-r	Reverse sort order
	-w N	Format N columns wide
	--color[={always,never,auto}]
== lsattr
Usage: lsattr [-Radlpv] [FILE]...
List ext2 file attributes
	-R	Recurse
	-a	Include names starting with .
	-d	List directory names, not contents
	-l	List long flag names
	-p	List project ID
	-v	List version/generation number
== lsmod
Usage: lsmod
List loaded kernel modules
== lsof
Usage: lsof
Show all open files
== lspci
Usage: lspci [-mk]
List all PCI devices
	-m	Parsable output
	-k	Show driver
== lsscsi
No help available
== lsusb
No help available
== lzcat
Usage: lzcat [FILE]...
Decompress to stdout
== lzma
Usage: lzma -d [-cfk] [FILE]...
Decompress FILEs (or stdin)
	-d	Decompress
	-c	Write to stdout
	-f	Force
	-k	Keep input files
	-t	Test integrity
== lzopcat
Usage: lzopcat [-vF] [FILE]...
	-v	Verbose
	-F	Don't verify checksum
== makedevs
Usage: makedevs [-d device_table] rootdir
Create a range of special files as specified in a device table.
Device table entries take the form of:
<name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
Where name is the file name, type can be one of:
	f	Regular file
	d	Directory
	c	Character device
	b	Block device
	p	Fifo (named pipe)
uid is the user id for the target file, gid is the group id for the
target file. The rest of the entries (major, minor, etc) apply to
to device special files. A '-' may be used for blank entries.
== md5sum
Usage: md5sum [-c[sw]] [FILE]...
Print or check MD5 checksums
	-c	Check sums against list in FILEs
	-s	Don't output anything, status code shows success
	-w	Warn about improperly formatted checksum lines
== mdev
Usage: mdev [-vS] { [-s] | [-df] }
	-v	Verbose
	-S	Log to syslog too
	-s	Scan /sys and populate /dev
	-d	Daemon, listen on netlink
	-f	Run in foreground
Bare mdev is a kernel hotplug helper. To activate it:
	echo /sbin/mdev >/proc/sys/kernel/hotplug
It uses /etc/mdev.conf with lines
	[-][ENV=regex;]...DEVNAME UID:GID PERM [>|=PATH]|[!] [@|$|*PROG]
where DEVNAME is device name regex, @major,minor[-minor2], or
environment variable regex. A common use of the latter is
to load modules for hotplugged devices:
	$MODALIAS=.* 0:0 660 @modprobe "$MODALIAS"
If /dev/mdev.seq file exists, mdev will wait for its value
to match $SEQNUM variable. This prevents plug/unplug races.
To activate this feature, create empty /dev/mdev.seq at boot.
If /dev/mdev.log file exists, debug log will be appended to it.
== mesg
Usage: mesg [y|n]
Control write access to your terminal
	y	Allow write access to your terminal
	n	Disallow write access to your terminal
== microcom
Usage: microcom [-d DELAY_MS] [-t TIMEOUT_MS ] [-s SPEED] [-X] TTY
Copy bytes from stdin to TTY and from TTY to stdout
	-d DELAY	Wait up to DELAY ms for TTY output before sending
			every next byte to it
	-t TIMEOUT	Exit if both stdin and TTY are silent for TIMEOUT ms
	-s SPEED	Set serial line to SPEED
	-X		Disable special meaning of NUL and Ctrl-X from stdin
== mim
Usage: mim [-f FILE] [SHELL_OPTIONS] [TARGET] ...
Run a script from a Makefile-like specification file
	-f FILE		Spec file (default Mimfile)
== mkdir
Usage: mkdir [-m MODE] [-p] DIRECTORY...
Create DIRECTORY
	-m MODE	Mode
	-p	No error if exists; make parent directories as needed
== mkdosfs
Usage: mkdosfs [-v] [-n LABEL] BLOCKDEV [KBYTES]
Make a FAT32 filesystem
	-v	Verbose
	-n LBL	Volume label
== mke2fs
Usage: mke2fs [-Fn] [-b BLK_SIZE] [-i INODE_RATIO] [-I INODE_SIZE] [-m RESERVED_PERCENT] [-L LABEL] BLOCKDEV [KBYTES]
	-b BLK_SIZE	Block size, bytes
	-F		Force
	-i RATIO	Max number of files is filesystem_size / RATIO
	-I BYTES	Inode size (min 128)
	-L LBL		Volume label
	-m PERCENT	Percent of blocks to reserve for admin
	-n		Dry run
== mkfifo
Usage: mkfifo [-m MODE] NAME
Create named pipe
	-m MODE	Mode (default a=rw)
== mknod
Usage: mknod [-m MODE] NAME TYPE [MAJOR MINOR]
Create a special file (block, character, or pipe)
	-m MODE	Creation mode (default a=rw)
TYPE:
	b	Block device
	c or u	Character device
	p	Named pipe (MAJOR MINOR must be omitted)
== mkpasswd
Usage: mkpasswd [-P FD] [-m TYPE] [-S SALT] [PASSWORD] [SALT]
Print crypt(3) hashed PASSWORD
	-P N	Read password from fd N
	-m TYPE	des,md5,sha256/512 (default md5)
	-S SALT
== mkswap
Usage: mkswap [-L LBL] BLOCKDEV [KBYTES]
Prepare BLOCKDEV to be used as swap partition
	-L LBL	Label
== mktemp
Usage: mktemp [-dt] [-p DIR] [TEMPLATE]
Create a temporary file with name based on TEMPLATE and print its name.
TEMPLATE must end with XXXXXX (e.g. [/dir/]nameXXXXXX).
Without TEMPLATE, -t tmp.XXXXXX is assumed.
	-d	Make directory, not file
	-q	Fail silently on errors
	-t	Prepend base directory name to TEMPLATE
	-p DIR	Use DIR as a base directory (implies -t)
	-u	Do not create anything; print a name
Base directory is: -p DIR, else $TMPDIR, else /tmp
== modprobe
Usage: modprobe [-alrqvsD] MODULE [SYMBOL=VALUE]...
	-a	Load multiple MODULEs
	-l	List (MODULE is a pattern)
	-r	Remove MODULE (stacks) or do autoclean
	-q	Quiet
	-v	Verbose
	-s	Log to syslog
	-D	Show dependencies
== more
Usage: more [FILE]...
View FILE (or stdin) one screenful at a time
== mount
Usage: mount [OPTIONS] [-o OPT] DEVICE NODE
Mount a filesystem. Filesystem autodetection requires /proc.
	-a		Mount all filesystems in fstab
	-r		Read-only mount
	-t FSTYPE[,...]	Filesystem type(s)
	-T FILE		Read FILE instead of /etc/fstab
	-O OPT		Mount only filesystems with option OPT (-a only)
-o OPT:
	loop		Ignored (loop devices are autodetected)
	[a]sync		Writes are [a]synchronous
	[no]atime	Disable/enable updates to inode access times
	[no]diratime	Disable/enable atime updates to directories
	[no]relatime	Disable/enable atime updates relative to modification time
	[no]dev		(Dis)allow use of special device files
	[no]exec	(Dis)allow use of executable files
	[no]suid	(Dis)allow set-user-id-root programs
	[r]shared	Convert [recursively] to a shared subtree
	[r]slave	Convert [recursively] to a slave subtree
	[r]private	Convert [recursively] to a private subtree
	[un]bindable	Make mount point [un]able to be bind mounted
	[r]bind		Bind a file or directory [recursively] to another location
	move		Relocate an existing mount point
	remount		Remount a mounted filesystem, changing flags
	ro		Same as -r
There are filesystem-specific -o flags.
== mountpoint
Usage: mountpoint [-q] { [-dn] DIR | -x DEVICE }
Check if DIR is a mountpoint
	-q	Quiet
	-d	Print major:minor of the filesystem
	-n	Print device name of the filesystem
	-x	Print major:minor of DEVICE
== mt
Usage: mt [-f DEVICE] OPCODE VALUE
Control magnetic tape drive operation
Opcodes:
bsf bsfm bsr bss datacompression drvbuffer eof eom erase
fsf fsfm fsr fss load lock mkpart nop offline ras1 ras2
ras3 reset retension rewind rewoffline seek setblk setdensity
setpart tell unload unlock weof wset
== mv
Usage: mv [-finT] SOURCE DEST
or: mv [-fin] SOURCE... { -t DIRECTORY | DIRECTORY }
Rename SOURCE to DEST, or move SOURCEs to DIRECTORY
	-f	Don't prompt before overwriting
	-i	Interactive, prompt before overwrite
	-n	Don't overwrite an existing file
	-T	Refuse to move if DEST is a directory
	-t DIR	Move all SOURCEs into DIR
== nameif
Usage: nameif [-s] [-c FILE] [IFNAME HWADDR]...
Rename network interface while it in the down state.
The device with address HWADDR is renamed to IFNAME.
	-c FILE	Configuration file (default: /etc/mactab)
	-s	Log to syslog
== netstat
Usage: netstat [-ral] [-tuwx] [-en]
Display networking information
	-r	Routing table
	-a	All sockets
	-l	Listening sockets
		Else: connected sockets
	-t	TCP sockets
	-u	UDP sockets
	-w	Raw sockets
	-x	Unix sockets
		Else: all socket types
	-e	Other/more information
	-n	Don't resolve names
== nice
Usage: nice [-n ADJUST] [PROG ARGS]
Change scheduling priority, run PROG
	-n ADJUST	Adjust priority by ADJUST
== nl
Usage: nl [OPTIONS] [FILE]...
Write FILEs to standard output with line numbers added
	-b STYLE	Which lines to number - a: all, t: nonempty, n: none
	-i N		Line number increment
	-s STRING	Use STRING as line number separator
	-v N		Start from N
	-w N		Width of line numbers
== nohup
Usage: nohup PROG ARGS
Run PROG immune to hangups, with output to a non-tty
== nologin
Usage: nologin
Politely refuse a login
== nproc
Usage: nproc [--all] [--ignore=N]
Print number of available CPUs
	--all		Number of installed CPUs
	--ignore=N	Exclude N CPUs
== nslookup
Usage: nslookup [-type=QUERY_TYPE] [-debug] HOST [DNS_SERVER]
Query DNS about HOST
QUERY_TYPE: soa,ns,a,aaaa,cname,mx,txt,ptr,srv,any
== nuke
Usage: nuke DIR...
Remove DIRs
== od
Usage: od [-abcdfhilovxs] [-t TYPE] [-A RADIX] [-N SIZE] [-j SKIP] [-S MINSTR] [-w WIDTH] [FILE]...
Print FILEs (or stdin) unambiguously, as octal bytes by default
== openvt
Usage: openvt [-c N] [-sw] [PROG ARGS]
Start PROG on a new virtual terminal
	-c N	Use specified VT
	-s	Switch to the VT
	-w	Wait for PROG to exit
== partprobe
Usage: partprobe DEVICE...
Ask kernel to rescan partition table
== passwd
Usage: passwd [-a ALG] [-dlu] [USER]
Change USER's password (default: current user)
	-a ALG	des,md5,sha256/512 (default md5)
	-d	Set password to ''
	-l	Lock (disable) account
	-u	Unlock (enable) account
== paste
Usage: paste [-d LIST] [-s] [FILE]...
Paste lines from each input file, separated with tab
	-d LIST	Use delimiters from LIST, not tab
	-s      Serial: one file at a time
== patch
Usage: patch [-RNE] [-p N] [-i DIFF] [ORIGFILE [PATCHFILE]]
	-p N	Strip N leading components from file names
	-i DIFF	Read DIFF instead of stdin
	-R	Reverse patch
	-N	Ignore already applied patches
	-E	Remove output files if they become empty
	--dry-run	Don't actually change files
== pidof
Usage: pidof [-s] [-o PID] [NAME]...
List PIDs of all processes with names that match NAMEs
	-s	Show only one PID
	-o PID	Omit given pid
		Use %PPID to omit pid of pidof's parent
== ping
Usage: ping [OPTIONS] HOST
Send ICMP ECHO_REQUESTs to HOST
	-c CNT		Send only CNT pings
	-s SIZE		Send SIZE data bytes in packets (default 56)
	-i SECS		Interval
	-A		Ping as soon as reply is received
	-t TTL		Set TTL
	-I IFACE/IP	Source interface or IP address
	-W SEC		Seconds to wait for the first response (default 10)
			(after all -c CNT packets are sent)
	-w SEC		Seconds until ping exits (default:infinite)
			(can exit earlier with -c CNT)
	-q		Quiet, only display output at start/finish
	-p HEXBYTE	Payload pattern
== pipe_progress
No help available
== pivot_root
Usage: pivot_root NEW_ROOT PUT_OLD
Move the current root file system to PUT_OLD and make NEW_ROOT
the new root file system
== poweroff
Usage: poweroff [-d DELAY] [-nf]
Halt and shut off power
	-d SEC	Delay interval
	-n	Do not sync
	-f	Force (don't go through init)
== printenv
Usage: printenv [VARIABLE]...
Print environment VARIABLEs.
If no VARIABLE specified, print all.
== printf
Usage: printf FORMAT [ARG]...
Format and print ARG(s) according to FORMAT (a-la C printf)
== ps
Usage: ps [-o COL1,COL2=HEADER]
Show list of processes
	-o COL1,COL2=HEADER	Select columns for display
== pwd
Usage: pwd
Print the full filename of the current working directory
== rdate
Usage: rdate [-s/-p] HOST
Set and print time from HOST using RFC 868
	-s	Only set system time
	-p	Only print time
== readlink
Usage: readlink [-fnv] FILE
Display the value of a symlink
	-n	Don't add newline
	-f	Canonicalize by following all symlinks
	-v	Verbose
== readprofile
Usage: readprofile [OPTIONS]
	-m MAPFILE	(Default: /boot/System.map)
	-p PROFILE	(Default: /proc/profile)
	-M NUM		Set the profiling multiplier to NUM
	-i		Print only info about the sampling step
	-v		Verbose
	-a		Print all symbols, even if count is 0
	-b		Print individual histogram-bin counts
	-s		Print individual counters within functions
	-r		Reset all the counters (root only)
	-n		Disable byte order auto-detection
== realpath
Usage: realpath FILE...
Print absolute pathnames of FILEs
== reboot
Usage: reboot [-d DELAY] [-nf]
Reboot the system
	-d SEC	Delay interval
	-n	Do not sync
	-f	Force (don't go through init)
== renice
Usage: renice [-n] PRIORITY [[-p|g|u] ID...]...
Change scheduling priority of a running process
	-n	Add PRIORITY to current nice value
		Without -n, nice value is set to PRIORITY
	-p	Process ids (default)
	-g	Process group ids
	-u	Process user names
== reset
Usage: reset
Reset terminal (ESC codes) and termios (signals, buffering, echo)
== resize
Usage: resize
Resize the screen
== resume
Usage: resume BLOCKDEV [OFFSET]
Restore system state from 'suspend-to-disk' data in BLOCKDEV
== rfkill
Usage: rfkill COMMAND [INDEX|TYPE]
Enable/disable wireless devices
Commands:
	list [INDEX|TYPE]	List current state
	block INDEX|TYPE	Disable device
	unblock INDEX|TYPE	Enable device
	TYPE: all, wlan(wifi), bluetooth, uwb(ultrawideband),
		wimax, wwan, gps, fm
== rm
Usage: rm [-irf] FILE...
Remove (unlink) FILEs
	-i	Always prompt before removing
	-f	Never prompt
	-R,-r	Recurse
== rmdir
Usage: rmdir [-p] DIRECTORY...
Remove DIRECTORY if it is empty
	-p	Include parents
	--ignore-fail-on-non-empty
== rmmod
Usage: rmmod [-wfa] [MODULE]...
Unload kernel modules
	-w	Wait until the module is no longer used
	-f	Force unload
	-a	Remove all unused modules (recursively)
== route
Usage: route [-ne] [-A inet[6]] [{add|del} [-net|-host] TARGET [netmask MASK]
	[gw GATEWAY] [metric N] [mss BYTES] [window BYTES] [reject] [IFACE]]
Show or edit kernel routing tables
	-n	Don't resolve names
	-e	Display other/more information
	-A inet[6]	Select address family
== run-init
Usage: run-init [-d CAP,CAP...] [-n] [-c CONSOLE_DEV] NEW_ROOT NEW_INIT [ARGS]
Free initramfs and switch to another root fs:
chroot to NEW_ROOT, delete all in /, move NEW_ROOT to /,
execute NEW_INIT. PID must be 1. NEW_ROOT must be a mountpoint.
	-c DEV	Reopen stdio to DEV after switch
	-d CAPS	Drop capabilities
	-n	Dry run
== run-parts
Usage: run-parts [-a ARG]... [-u UMASK] [--reverse] [--test] [--exit-on-error] DIRECTORY
Run a bunch of scripts in DIRECTORY
	-a ARG		Pass ARG as argument to scripts
	-u UMASK	Set UMASK before running scripts
	--reverse	Reverse execution order
	--test		Dry run
	--exit-on-error	Exit if a script exits with non-zero
== runlevel
Usage: runlevel [FILE]
Find the current and previous system runlevel
If no utmp FILE exists or if no runlevel record can be found,
print "unknown"
== sed
Usage: sed [-i[SFX]] [-nrE] [-f FILE]... [-e CMD]... [FILE]...
or: sed [-i[SFX]] [-nrE] CMD [FILE]...
	-e CMD	Add CMD to sed commands to be executed
	-f FILE	Add FILE contents to sed commands to be executed
	-i[SFX]	Edit files in-place (otherwise write to stdout)
		Optionally back files up, appending SFX
	-n	Suppress automatic printing of pattern space
	-r,-E	Use extended regex syntax
If no -e or -f, the first non-option argument is the sed command string.
Remaining arguments are input files (stdin if none).
== seedrng
Usage: seedrng [-d DIR] [-n]
Seed the kernel RNG from seed files
	-d DIR	Use seed files in DIR (default: /var/lib/seedrng)
	-n	Do not credit randomness, even if creditable
== seq
Usage: seq [-w] [-s SEP] [FIRST [INC]] LAST
Print numbers from FIRST to LAST, in steps of INC.
FIRST, INC default to 1.
	-w	Pad with leading zeros
	-s SEP	String separator
== setarch
Usage: setarch PERSONALITY [-R] PROG ARGS
PERSONALITY may be:
	linux32	Set 32bit uname emulation
	linux64	Set 64bit uname emulation
	-R	Disable address space randomization
== setconsole
Usage: setconsole [-r] [DEVICE]
Make writes to /dev/console appear on DEVICE (default: /dev/tty).
Does not redirect kernel log output or reads from /dev/console.
	-r	Reset: writes to /dev/console go to kernel log tty(s)
== setfattr
Usage: setfattr [-h] -n|-x ATTR [-v VALUE] FILE...
Set extended attributes
	-h		Do not follow symlinks
	-x ATTR		Remove attribute ATTR
	-n ATTR		Set attribute ATTR to VALUE
	-v VALUE	(default: empty)
== setkeycodes
Usage: setkeycodes { SCANCODE KEYCODE }...
Modify kernel's scancode-to-keycode map,
allowing unusual keyboards to generate usable keycodes.
SCANCODE is either xx or e0xx (hexadecimal), KEYCODE is decimal.
== setlogcons
Usage: setlogcons [N]
Pin kernel output to VT console N. Default:0 (do not pin)
== setpriv
Usage: setpriv [OPTIONS] PROG ARGS
Run PROG with different privilege settings
-d,--dump		Show current capabilities
--nnp,--no-new-privs	Ignore setuid/setgid bits and file capabilities
--inh-caps CAP,CAP	Set inheritable capabilities
--ambient-caps CAP,CAP	Set ambient capabilities
== setserial
Usage: setserial [-abGvz] { DEVICE [PARAMETER [ARG]]... | -g DEVICE... }
Print or set serial port parameters
	-a	Print all
	-b	Print summary
	-G	Print as setserial PARAMETERs
	-v	Verbose
	-z	Zero out serial flags before setting
	-g	All args are device names
PARAMETERs: (* = takes ARG, ^ = can be turned off by preceding ^)
	*port, *irq, *divisor, *uart, *baud_base, *close_delay, *closing_wait,
	^fourport, ^auto_irq, ^skip_test, ^sak, ^session_lockout, ^pgrp_lockout,
	^callout_nohup, ^split_termios, ^hup_notify, ^low_latency, autoconfig,
	spd_normal, spd_hi, spd_vhi, spd_shi, spd_warp, spd_cust
ARG for uart:
	unknown, 8250, 16450, 16550, 16550A, Cirrus, 16650, 16650V2, 16750,
	16950, 16954, 16654, 16850, RSA, NS16550A, XSCALE, RM9000, OCTEON, AR7,
	U6_16550A
== setsid
Usage: setsid [-c] PROG ARGS
Run PROG in a new session. PROG will have no controlling terminal
and will not be affected by keyboard signals (^C etc).
	-c	Set controlling terminal to stdin
== sh
Usage: sh [-il] [-|+Cabefmnuvx] [-|+o OPT]... [-c 'SCRIPT' [ARG0 ARGS] | FILE ARGS | -s ARGS]
Unix shell interpreter
== sha1sum
Usage: sha1sum [-c[sw]] [FILE]...
Print or check SHA1 checksums
	-c	Check sums against list in FILEs
	-s	Don't output anything, status code shows success
	-w	Warn about improperly formatted checksum lines
== sha256sum
Usage: sha256sum [-c[sw]] [FILE]...
Print or check SHA256 checksums
	-c	Check sums against list in FILEs
	-s	Don't output anything, status code shows success
	-w	Warn about improperly formatted checksum lines
== sha3sum
Usage: sha3sum [-c[sw]] [-a BITS] [FILE]...
Print or check SHA3 checksums
	-c	Check sums against list in FILEs
	-s	Don't output anything, status code shows success
	-w	Warn about improperly formatted checksum lines
	-a BITS	224 (default), 256, 384, 512
== sha512sum
Usage: sha512sum [-c[sw]] [FILE]...
Print or check SHA512 checksums
	-c	Check sums against list in FILEs
	-s	Don't output anything, status code shows success
	-w	Warn about improperly formatted checksum lines
== shred
Usage: shred [-fuz] [-n N] [-s SIZE] FILE...
Overwrite/delete FILEs
	-f	Chmod to ensure writability
	-s SIZE	Size to write
	-n N	Overwrite N times (default 3)
	-z	Final overwrite with zeros
	-u	Remove file
== sleep
Usage: sleep [N]...
Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays
== sort
Usage: sort [-nrughMcszbdfiokt] [-o FILE] [-k START[.OFS][OPTS][,END[.OFS][OPTS]] [-t CHAR] [FILE]...
Sort lines of text
	-o FILE	Output to FILE
	-c	Check whether input is sorted
	-b	Ignore leading blanks
	-f	Ignore case
	-i	Ignore unprintable characters
	-d	Dictionary order (blank or alphanumeric only)
	-n	Sort numbers
	-g	General numerical sort
	-h	Sort human readable numbers (2K 1G)
	-M	Sort month
	-V	Sort version
	-t CHAR	Field separator
	-k N[,M] Sort by Nth field
	-r	Reverse sort order
	-s	Stable (don't sort ties alphabetically)
	-u	Suppress duplicate lines
	-z	NUL terminated input and output
== start-stop-daemon
Usage: start-stop-daemon -S|-K [OPTIONS] [-- ARGS]
Search for matching processes, and then
-S: start a process unless a matching process is found
-K: stop all matching processes
Process matching:
	-u USERNAME|UID	Match only this user's processes
	-n NAME		Match processes with NAME
			in comm field in /proc/PID/stat
	-x EXECUTABLE	Match processes with this command
			in /proc/PID/cmdline
	-p FILE		Match a process with PID from FILE
	All specified conditions must match
-S only:
	-x EXECUTABLE	Program to run
	-a NAME		Zeroth argument
	-b		Background
	-O FILE		Append stdout and stderr to FILE
	-N N		Change nice level
	-c USER[:[GRP]]	Change user/group
	-d DIR		Change to DIR
	-m		Write PID to pidfile specified by -p
-K only:
	-s SIG		Signal to send
	-t		Match only, exit with 0 if found
Other:
	-o		Exit with status 0 if nothing is done
	-v		Verbose
	-q		Quiet
== strings
Usage: strings [-fo] [-t o|d|x] [-n LEN] [FILE]...
Display printable strings in a binary file
	-f		Precede strings with filenames
	-o		Precede strings with octal offsets
	-t o|d|x	Precede strings with offsets in base 8/10/16
	-n LEN		At least LEN characters form a string (default 4)
== stty
Usage: stty [-a|g] [-F DEVICE] [SETTING]...
Without arguments, prints baud rate, line discipline,
and deviations from stty sane
	-F DEVICE	Open device instead of stdin
	-a		Print all current settings in human-readable form
	-g		Print in stty-readable form
	[SETTING]	See manpage
== su
Usage: su [-lmp] [-s SH] [-] [USER [FILE ARGS | -c 'CMD' [ARG0 ARGS]]]
Run shell under USER (by default, root)
	-,-l	Clear environment, go to home dir, run shell as login shell
	-p,-m	Do not set new $HOME, $SHELL, $USER, $LOGNAME
	-c CMD	Command to pass to 'sh -c'
	-s SH	Shell to use instead of user's default
== sulogin
Usage: sulogin [-t N] [TTY]
Single user login
	-p	Start a login shell
	-t SEC	Timeout
== svc
Usage: svc [-udopchaitkx] SERVICE_DIR...
Control services monitored by runsv supervisor
	-u	If service is not running, start it; restart if it stops
	-d	If service is running, send TERM+CONT signals; do not restart it
	-o	Once: if service is not running, start it; do not restart it
	-pchaitk Send STOP, CONT, HUP, ALRM, INT, TERM, KILL signal to service
	-x	Exit: runsv will exit as soon as the service is down
== svok
Usage: svok SERVICE_DIR
Check whether runsv supervisor is running.
Exit code is 0 if it does, 100 if it does not,
111 (with error message) if SERVICE_DIR does not exist.
== swapoff
Usage: swapoff [-a] [DEVICE]
Stop swapping on DEVICE
	-a	Stop swapping on all swap devices
== swapon
Usage: swapon [-a] [-e] [DEVICE]
Start swapping on DEVICE
	-a	Start swapping on all swap devices
	-e	Silently skip devices that do not exist
== switch_root
Usage: switch_root [-c CONSOLE_DEV] NEW_ROOT NEW_INIT [ARGS]
Free initramfs and switch to another root fs:
chroot to NEW_ROOT, delete all in /, move NEW_ROOT to /,
execute NEW_INIT. PID must be 1. NEW_ROOT must be a mountpoint.
	-c DEV	Reopen stdio to DEV after switch
== sync
Usage: sync
Write all buffered blocks to disk
== sysctl
Usage: sysctl [-enq] { -a | -p [FILE]... | [-w] [KEY[=VALUE]]... }
Show/set kernel parameters
	-e	Don't warn about unknown keys
	-n	Don't show key names
	-q      Quiet
	-a	Show all values
	-p	Set values from FILEs (default /etc/sysctl.conf)
	-w	Set values
== syslogd
Usage: syslogd [OPTIONS]
System logging utility
(this version of syslogd ignores /etc/syslog.conf)
	-n		Run in foreground
	-R HOST[:PORT]	Log to HOST:PORT (default PORT:514)
	-L		Log locally and via network (default is network only if -R)
	-O FILE		Log to FILE (default: /var/log/messages, stdout if -)
	-s SIZE		Max size (KB) before rotation (default 200KB, 0=off)
	-b N		N rotated logs to keep (default 1, max 99, 0=purge)
	-l N		Log only messages more urgent than prio N (1-8)
	-S		Smaller output
	-t		Strip client-generated timestamps
== tail
Usage: tail [OPTIONS] [FILE]...
Print last 10 lines of FILEs (or stdin) to.
With more than one FILE, precede each with a filename header.
	-c [+]N[bkm]	Print last N bytes
	-n N[bkm]	Print last N lines
	-n +N[bkm]	Start on Nth line and print the rest
			(b:*512 k:*1024 m:*1024^2)
	-q		Never print headers
	-v		Always print headers
	-f		Print data as file grows
	-F		Same as -f, but keep retrying
	-s SECONDS	Wait SECONDS between reads with -f
== tar
Usage: tar c|x|t [-ahvokO] [-f TARFILE] [-C DIR] [-T FILE] [-X FILE] [LONGOPT]... [FILE]...
Create, extract, or list files from a tar file
	c	Create
	x	Extract
	t	List
	-f FILE	Name of TARFILE ('-' for stdin/out)
	-C DIR	Change to DIR before operation
	-v	Verbose
	-O	Extract to stdout
	-o	Don't restore user:group
	-k	Don't replace existing files
	-a	(De)compress based on extension
	-h	Follow symlinks
	-T FILE	File with names to include
	-X FILE	File with glob patterns to exclude
	--exclude PATTERN	Glob pattern to exclude
	--overwrite		Replace existing files
	--strip-components NUM	NUM of leading components to strip
	--no-recursion		Don't descend in directories
	--numeric-owner		Use numeric user:group
	--no-same-permissions	Don't restore access permissions
	--to-command COMMAND	Pipe files to COMMAND
== tc
Usage: tc OBJECT CMD [dev STRING]
OBJECT: qdisc|class|filter
CMD: add|del|change|replace|show
qdisc [handle QHANDLE] [root|ingress|parent CLASSID]
	[[QDISC_KIND] [help|OPTIONS]]
	QDISC_KIND := [p|b]fifo|tbf|prio|cbq|red|etc.
qdisc show [dev STRING] [ingress]
class [classid CLASSID] [root|parent CLASSID]
	[[QDISC_KIND] [help|OPTIONS] ]
class show [ dev STRING ] [root|parent CLASSID]
filter [pref PRIO] [protocol PROTO]
	[root|classid CLASSID] [handle FILTERID]
	[[FILTER_TYPE] [help|OPTIONS]]
filter show [dev STRING] [root|parent CLASSID]
== tee
Usage: tee [-ai] [FILE]...
Copy stdin to each FILE, and also to stdout
	-a	Append to the given FILEs, don't overwrite
	-i	Ignore interrupt signals (SIGINT)
== telnet
Usage: telnet [-a] [-l USER] HOST [PORT]
Connect to telnet server
	-a	Automatic login with $USER variable
	-l USER	Automatic login as USER
== telnetd
Usage: telnetd [OPTIONS]
Handle incoming telnet connections
	-l LOGIN	Exec LOGIN on connect
	-f ISSUE_FILE	Display ISSUE_FILE instead of /etc/issue
	-K		Close connection as soon as login exits
			(normally wait until all programs close slave pty)
	-p PORT		Port to listen on. Default 23
	-b ADDR[:PORT]	Address to bind to
	-F		Run in foreground
	-i		Inetd mode
	-w SEC		Inetd 'wait' mode, linger time SEC
		inetd.conf line: 23 stream tcp wait root telnetd telnetd -w10
	-S		Log to syslog (implied by -i or without -F and -w)
== test
== tftp
Usage: tftp [OPTIONS] HOST [PORT]
Transfer a file from/to tftp server
	-l FILE	Local FILE
	-r FILE	Remote FILE
	-g	Get file
	-p	Put file
	-b SIZE	Transfer blocks in bytes
== time
Usage: time [-vpa] [-o FILE] PROG ARGS
Run PROG, display resource usage when it exits
	-v	Verbose
	-p	POSIX output format
	-f FMT	Custom format
	-o FILE	Write result to FILE
	-a	Append (else overwrite)
== top
Usage: top [-b] [-n COUNT] [-d SECONDS]
Show a view of process activity in real time.
Read the status of all processes from /proc each SECONDS
and show a screenful of them.
Keys:
	N/M/P/T: sort by pid/mem/cpu/time
	R: reverse sort
	Q,^C: exit
Options:
	-b	Batch mode
	-n N	Exit after N iterations
	-d SEC	Delay between updates
== touch
Usage: touch [-cham] [-d DATE] [-t DATE] [-r FILE] FILE...
Update mtime of FILEs
	-c	Don't create files
	-h	Don't follow links
	-a	Change only atime
	-m	Change only mtime
	-d DT	Date/time to use
	-t DT	Date/time to use
	-r FILE	Use FILE's date/time
== tr
Usage: tr [-cds] STRING1 [STRING2]
Translate, squeeze, or delete characters from stdin, writing to stdout
	-c	Take complement of STRING1
	-d	Delete input characters coded STRING1
	-s	Squeeze multiple output characters of STRING2 into one character
== traceroute
Usage: traceroute [-Flnrv] [-f 1ST_TTL] [-m MAXTTL] [-q PROBES] [-p PORT]
	[-t TOS] [-w WAIT_SEC] [-s SRC_IP] [-i IFACE]
	[-z PAUSE_MSEC] HOST [BYTES]
Trace the route to HOST
	-F	Set don't fragment bit
	-l	Display TTL value of the returned packet
	-n	Print numeric addresses
	-r	Bypass routing tables, send directly to HOST
	-f N	First number of hops (default 1)
	-m N	Max number of hops
	-q N	Number of probes per hop (default 3)
	-p N	Base UDP port number used in probes
		(default 33434)
	-s IP	Source address
	-i IFACE Source interface
	-t N	Type-of-service in probe packets (default 0)
	-w SEC	Wait for a response (default 3)
	-z MSEC	Wait before each send
== tree
No help available
== true
== truncate
Usage: truncate [-c] -s SIZE FILE...
Truncate FILEs to SIZE
	-c	Do not create files
	-s SIZE
== ts
Usage: ts [-is] [STRFTIME]
Pipe stdin to stdout, add timestamp to each line
	-s	Time since start
	-i	Time since previous line
== tsort
Usage: tsort [FILE]
Topological sort
== tty
Usage: tty [-s]
Print file name of stdin's terminal
	-s	Print nothing, only return exit status
== ubirename
Usage: ubirename UBI_DEVICE OLD_VOLNAME NEW_VOLNAME [OLD2 NEW2]...
Rename UBI volumes on UBI_DEVICE
== udhcpc
Usage: udhcpc [-fbqRB] [-a[MSEC]] [-t N] [-T SEC] [-A SEC|-n]
	[-i IFACE] [-s PROG] [-p PIDFILE]
	[-oC] [-r IP] [-V VENDOR] [-F NAME] [-x OPT:VAL]... [-O OPT]...
	-i IFACE	Interface to use (default eth0)
	-s PROG		Run PROG at DHCP events (default /usr/share/udhcpc/default.script)
	-p FILE		Create pidfile
	-B		Request broadcast replies
	-t N		Send up to N discover packets (default 3)
	-T SEC		Pause between packets (default 3)
	-A SEC		Wait if lease is not obtained (default 20)
	-b		Background if lease is not obtained
	-n		Exit if lease is not obtained
	-q		Exit after obtaining lease
	-R		Release IP on exit
	-f		Run in foreground
	-S		Log to syslog too
	-a[MSEC]	Validate offered address with ARP ping
	-r IP		Request this IP address
	-o		Don't request any options (unless -O is given)
	-O OPT		Request option OPT from server (cumulative)
	-x OPT:VAL	Include option OPT in sent packets (cumulative)
			Examples of string, numeric, and hex byte opts:
			-x hostname:bbox - option 12
			-x lease:3600 - option 51 (lease time)
			-x 0x3d:0100BEEFC0FFEE - option 61 (client id)
			-x 14:'"dumpfile"' - option 14 (shell-quoted)
	-F NAME		Ask server to update DNS mapping for NAME
	-V VENDOR	Vendor identifier (default 'udhcp VERSION')
	-C		Don't send MAC as client identifier
Signals:
	USR1	Renew lease
	USR2	Release lease
== uevent
Usage: uevent [PROG ARGS]
uevent runs PROG for every netlink notification.
PROG's environment contains data passed from the kernel.
Typical usage (daemon for dynamic device node creation):
	# uevent mdev & mdev -s
== umount
Usage: umount [-rlfda] [-t FSTYPE] FILESYSTEM|DIRECTORY
Unmount filesystems
	-a	Unmount all filesystems
	-r	Remount devices read-only if mount is busy
	-l	Lazy umount (detach filesystem)
	-f	Force umount (i.e., unreachable NFS server)
	-d	Free loop device if it has been used
	-t FSTYPE[,...]	Unmount only these filesystem type(s)
== uname
Usage: uname [-amnrspvio]
Print system information
	-a	Print all
	-m	Machine (hardware) type
	-n	Hostname
	-r	Kernel release
	-s	Kernel name (default)
	-p	Processor type
	-v	Kernel version
	-i	Hardware platform
	-o	OS name
== uniq
Usage: uniq [-cduiz] [-f,s,w N] [FILE [OUTFILE]]
Discard duplicate lines
	-c	Prefix lines by the number of occurrences
	-d	Only print duplicate lines
	-u	Only print unique lines
	-i	Ignore case
	-z	NUL terminated output
	-f N	Skip first N fields
	-s N	Skip first N chars (after any skipped fields)
	-w N	Compare N characters in line
== unix2dos
Usage: unix2dos [-ud] [FILE]
Convert FILE in-place from Unix to DOS format.
When no file is given, use stdin/stdout.
	-u	dos2unix
	-d	unix2dos
== unlink
Usage: unlink FILE
Delete FILE by calling unlink()
== unlzma
Usage: unlzma [-cfk] [FILE]...
Decompress FILEs (or stdin)
	-c	Write to stdout
	-f	Force
	-k	Keep input files
	-t	Test integrity
== unlzop
Usage: unlzop [-cfUvF] [FILE]...
	-c	Write to stdout
	-f	Force
	-U	Delete input files
	-t	Test integrity
	-v	Verbose
	-F	Don't verify checksum
== unxz
Usage: unxz [-cfk] [FILE]...
Decompress FILEs (or stdin)
	-c	Write to stdout
	-f	Force
	-k	Keep input files
	-t	Test integrity
== unzip
Usage: unzip [-lnojpqK] FILE[.zip] [FILE]... [-x FILE]... [-d DIR]
Extract FILEs from ZIP archive
	-l	List contents (with -q for short form)
	-n	Never overwrite files (default: ask)
	-o	Overwrite
	-j	Do not restore paths
	-p	Write to stdout
	-t	Test
	-q	Quiet
	-K	Do not clear SUID bit
	-x FILE	Exclude FILEs
	-d DIR	Extract into DIR
== uptime
Usage: uptime
Display the time since the last boot
== usleep
Usage: usleep N
Pause for N microseconds
== uudecode
Usage: uudecode [-o OUTFILE] [INFILE]
Uudecode a file
Finds OUTFILE in uuencoded source unless -o is given
== uuencode
Usage: uuencode [-m] [FILE] STORED_FILENAME
Uuencode FILE (or stdin) to stdout
	-m	Use base64 encoding per RFC1521
== vconfig
Usage: vconfig COMMAND [OPTIONS]
Create and remove virtual ethernet devices
	add IFACE VLAN_ID
	rem VLAN_NAME
	set_flag IFACE 0|1 VLAN_QOS
	set_egress_map VLAN_NAME SKB_PRIO VLAN_QOS
	set_ingress_map VLAN_NAME SKB_PRIO VLAN_QOS
	set_name_type NAME_TYPE
== vi
Usage: vi [-c CMD] [-R] [-H] [FILE]...
Edit FILE
	-c CMD	Initial command to run ($EXINIT and ~/.exrc also available)
	-R	Read-only
	-H	List available features
== vlock
Usage: vlock [-a]
Lock a virtual terminal. A password is required to unlock.
	-a	Lock all VTs
== w
Usage: w
Show who is logged on
== watch
Usage: watch [-n SEC] [-t] PROG ARGS
Run PROG periodically
	-n SEC	Period (default 2)
	-t	Don't print header
== watchdog
Usage: watchdog [-t N[ms]] [-T N[ms]] [-F] DEV
Periodically write to watchdog device DEV
	-T N	Reboot after N seconds if not reset (default 60)
	-t N	Reset every N seconds (default 30)
	-F	Run in foreground
Use 500ms to specify period in milliseconds
== wc
Usage: wc [-clwL] [FILE]...
Count lines, words, and bytes for FILEs (or stdin)
	-c	Count bytes
	-l	Count newlines
	-w	Count words
	-L	Print longest line length
== wget
Usage: wget [-cqS] [--spider] [-O FILE] [-o LOGFILE] [--header STR]
	[--post-data STR | --post-file FILE] [-Y on/off]
	[-P DIR] [-U AGENT] [-T SEC] URL...
Retrieve files via HTTP or FTP
	--spider	Only check URL existence: $? is 0 if exists
	--header STR	Add STR (of form 'header: value') to headers
	--post-data STR	Send STR using POST method
	--post-file FILE	Send FILE using POST method
	-c		Continue retrieval of aborted transfer
	-q		Quiet
	-P DIR		Save to DIR (default .)
	-S    		Show server response
	-T SEC		Network read timeout is SEC seconds
	-O FILE		Save to FILE ('-' for stdout)
	-o LOGFILE	Log messages to FILE
	-U STR		Use STR for User-Agent header
	-Y on/off	Use proxy
== which
Usage: which [-a] COMMAND...
Locate COMMAND
	-a	Show all matches
== who
Usage: who [-aH]
Show who is logged on
	-a	Show all
	-H	Print column headers
== whoami
Usage: whoami
Print the user name associated with the current effective user id
== xargs
Usage: xargs [OPTIONS] [PROG ARGS]
Run PROG on every item given by stdin
	-0	NUL terminated input
	-a FILE	Read from FILE instead of stdin
	-o	Reopen stdin as /dev/tty
	-r	Don't run command if input is empty
	-t	Print the command on stderr before execution
	-E STR,-e[STR]	STR stops input processing
	-I STR	Replace STR within PROG ARGS with input line
	-n N	Pass no more than N args to PROG
	-s N	Pass command line of no more than N bytes
	-P N	Run up to N PROGs in parallel
	-x	Exit if size is exceeded
== xxd
Usage: xxd [-pri] [-g N] [-c N] [-l LEN] [-s OFS] [-o OFS] [FILE]
Hex dump FILE (or stdin)
	-g N		Bytes per group
	-c N		Bytes per line
	-p		Show only hex bytes, assumes -c30
	-i		C include file style
	-l LENGTH	Show only first LENGTH bytes
	-s OFFSET	Skip OFFSET bytes
	-o OFFSET	Add OFFSET to displayed offset
	-r		Reverse (with -p, assumes no offsets in input)
== xz
Usage: xz -d [-cfk] [FILE]...
Decompress FILEs (or stdin)
	-d	Decompress
	-c	Write to stdout
	-f	Force
	-k	Keep input files
	-t	Test integrity
== xzcat
Usage: xzcat [FILE]...
Decompress to stdout
== yes
Usage: yes [STRING]
Repeatedly print a line with STRING, or 'y'
== zcat
Usage: zcat [FILE]...
Decompress to stdout
