kernel/rv1106: batch A — TRNG verified + OTP (read fn corrected)
TRNG ✅ VERIFIED on c8a3: rv1106 trngv1 == rk3588 TRNG_V1 IP; one OF-table entry reusing rk3588_soc_data. /dev/hwrng active, rng_current=rockchip-rng, real HW entropy (c697503d... non-zero). Hardware entropy for the panel. OTP 🔨: rockchip-otp0 nvmem device registers; added rv1106_data (6-clock sbpi layout). First reg_read=rk3588_otp_read timed out ('timeout during read setup'); corrected to px30_otp_read (user-mode OTPC_USER interface = the vendor's rk3568_otp_read sequence). Cell reads re-verify next _b boot. See rng-otp/PORT-DONE.md. dts snapshot refreshed (rng+otp enabled). Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_017wB8KB3MMQztRDXCMCkPrf
This commit is contained in:
co-authored by
Claude Opus 4.8
parent
92905bf4d4
commit
270211029d
@@ -187,3 +187,14 @@
|
|||||||
&rga2 {
|
&rga2 {
|
||||||
status = "okay";
|
status = "okay";
|
||||||
};
|
};
|
||||||
|
|
||||||
|
/* --- batch A: hardware RNG (trngv1, same IP as rk3588) --- */
|
||||||
|
&rng {
|
||||||
|
compatible = "rockchip,rv1106-rng";
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
/* --- batch A: OTP / nvmem (chip id, MAC, PHY bandgap for GMAC) --- */
|
||||||
|
&otp {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|||||||
@@ -0,0 +1,47 @@
|
|||||||
|
# TRNG + OTP port (batch A) — 6.18
|
||||||
|
|
||||||
|
## TRNG (hardware RNG) — ✅ VERIFIED on warden-c8a3 (2026-08-25)
|
||||||
|
rv1106's `rockchip,trngv1` is the same standalone TRNG_V1 IP as rk3588 (identical
|
||||||
|
register map). Mainline `drivers/char/hw_random/rockchip-rng.c` already drives it.
|
||||||
|
|
||||||
|
**Delta:** one OF-table entry reusing `rk3588_soc_data`:
|
||||||
|
```c
|
||||||
|
{ .compatible = "rockchip,rv1106-rng", .data = (void *)&rk3588_soc_data },
|
||||||
|
```
|
||||||
|
(The driver grabs clocks via `clk_bulk_get_all` and treats reset as optional, so
|
||||||
|
rv1106's clock/reset names need no special handling.) Kconfig
|
||||||
|
`HW_RANDOM_ROCKCHIP=y` (already set).
|
||||||
|
|
||||||
|
**DT** (`rv1106-warden.dts`): override the dtsi `rng@ff448000` node —
|
||||||
|
```dts
|
||||||
|
&rng { compatible = "rockchip,rv1106-rng"; status = "okay"; };
|
||||||
|
```
|
||||||
|
|
||||||
|
**Evidence:** `/dev/hwrng` present, `rng_current = rockchip-rng`,
|
||||||
|
`dd if=/dev/hwrng bs=16` → `c697 503d f9db 6b84 50e4 e1ee f232 b2ae` (real HW
|
||||||
|
entropy, non-zero). Hardware entropy source for the panel's crypto/keys.
|
||||||
|
|
||||||
|
## OTP / nvmem — 🔨 device registers; read fn corrected, re-verify pending
|
||||||
|
Mainline `drivers/nvmem/rockchip-otp.c` gains an `rv1106_data` + compatible.
|
||||||
|
|
||||||
|
**Delta:**
|
||||||
|
```c
|
||||||
|
static const char * const rv1106_otp_clocks[] = {
|
||||||
|
"usr", "sbpi", "apb", "phy", "arb", "pmc", /* matches DT clock-names */
|
||||||
|
};
|
||||||
|
static const struct rockchip_data rv1106_data = {
|
||||||
|
.size = 0x80,
|
||||||
|
.clks = rv1106_otp_clocks,
|
||||||
|
.num_clks = ARRAY_SIZE(rv1106_otp_clocks),
|
||||||
|
.reg_read = px30_otp_read, /* user-mode OTPC_USER interface */
|
||||||
|
};
|
||||||
|
/* OF: { "rockchip,rv1106-otp", &rv1106_data } */
|
||||||
|
```
|
||||||
|
Kconfig `NVMEM_ROCKCHIP_OTP=y`. **DT:** `&otp { status = "okay"; };` (the dtsi
|
||||||
|
`otp@ff3d0000` node already carries compatible + the 6 clocks/resets).
|
||||||
|
|
||||||
|
**First try** used `.reg_read = rk3588_otp_read` → `timeout during read setup`
|
||||||
|
(rk3588 uses a different addressing path). Corrected to `px30_otp_read` — the
|
||||||
|
mainline user-mode OTPC_USER read, the same sequence the vendor 5.10 driver used
|
||||||
|
for rv1106 (its `rk3568_otp_read`). Re-verify cell reads on the next _b boot;
|
||||||
|
`rockchip-otp0` nvmem device already registers.
|
||||||
Reference in New Issue
Block a user