Replace every em dash with real punctuation (rewrites, not hyphen swaps)
in docs, code comments, scripts, configs, and the port records; convert
en dashes, curly quotes, ellipsis glyphs, arrows, and section signs to
ASCII; drop machine-writing tell phrases from living docs. ADR titles
now use a colon. The M2 bring-up DTS model string carried an em dash
into the patch series and its record echoes; fixed at both, and the full
series re-verified to apply cleanly onto pristine 6.18.46. One comment
in freshness.h deliberately names the em dash glyph the UI renders as
the unknown mark; that is data, kept as prose naming it.
Verified: cargo tests (sim, config-lint, rs485-bridge), shellcheck,
both driver MC/DC harnesses, patches-apply.
Phase 3 of the device sim, all verified on QEMU 10.0.11:
- qemu/rs485-bridge/: std-only crate bridging a QEMU serial chardev (unix
socket) to warden_sim::ModbusSlave — gap-based RTU framing (CRC failures
degrade to real-slave silence), line-protocol control socket for register
seeding and fault injection (drop/exception/clear), bounds-checked so a
scenario typo answers err instead of panicking the bus. 7 unit tests,
bench in the sim_bench pattern. Verified end-to-end: guest master frame
on /dev/ttyS4 (pci-serial) answered from the sim slave, CRC-correct.
- virt machine gains highmem=off: the 32-bit non-LPAE kernel cannot reach
virt's default 40-bit PCIe ECAM (pci-host-generic EOVERFLOW); with it the
full PCI set probes (16550A ttyS0, i6300esb).
- Watchdog scenario verified: guest arms /dev/watchdog, no petting, i6300esb
resets the VM ~30s later (first environment where this arm is testable).
- qemu/tests/portal-scenario.sh: the real static-musl warden-flared inside
the VM against flare-edge's mock portal on the host — authenticated
check-in, firmware desired-state pull, and download of a real signed
tier-1 .wfw offer, asserted from the portal log. Found and filed
flare-edge#106 (fatal SIGBUS in the HPMCU boot-loaded probe on
non-RV1106 memory maps); runs against a flared built from the
qemu-vm-support fix branch.
- stage-2 init: WARDEN_FLARE_INSECURE=1 + WARDEN_HPMCU=0 (documented VM
deviations), firmware-version stamp, newline-terminated state seeds.
- CI: rs485-bridge joins the test loop and bench job; new qemu-tools job
(shellcheck + initramfs + disk image on hosted runners); kernel-build
gains a fail-closed qemu boot-smoke step. All qemu scripts shellcheck-clean.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018HUayid7W5w7jBdb9Rrj1K
The third simulator (deliberately not named "sim"): a QEMU -M virt VM that
boots the real 6.18.46 kernel and enters at -kernel zImage — everything below
(BootROM/idblock/U-Boot/real BCB A/B selection) is closed blobs + mask ROM
and is explicitly out of scope.
- qemu/mkinitramfs.sh: pinned static busybox (sha256 fail-closed) + rootfs/
- qemu/mkimage.sh: unprivileged sparse disk image with the device's canonical
12-partition blkdevparts A/B layout (vda == mmcblk0 mapping)
- qemu/rootfs/: stage-1 init (by-name symlinks from PARTNAME uevents,
whole-token warden.slot= parse, switch_root) + stage-2 init (userdata/oem
mounts, slirp networking, payload daemon start)
- qemu/run.sh: runner with --slot/--rtc/--watchdog/--rs485/--qmp/--display
- qemu/configs/virt.fragment + WARDEN_KCONFIG_FRAGMENT hook in
build/build-kernel.sh (canonical RV1106 build untouched when unset):
adds PCI, pci-serial, i6300esb watchdog, WireGuard, virtio-gpu/input
- qemu/tests/boot-smoke.sh: sentinel-asserting boot test
Verified on QEMU 10.0.11: canonical zImage boots -M virt unmodified (the
feared DEBUG_UNCOMPRESS decompressor hang does not exist in 6.18); full
stack boots both slots; 12 by-name symlinks; userdata persists across
reboot; -rtc base=2021-01-01 reproduces the no-RTC wrong-clock class.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018HUayid7W5w7jBdb9Rrj1K
BFE Engineering