MAILBOX (fully open A7<->RISC-V SCR1 round-trip, 5/5 exact echoes on c8a3):
- rockchip-mailbox.c: rv1106 has 1 shared IRQ, not 4/channel -> added
rv1106_drv_data{num_chans=1} + compatible (rk3368 fallback assumed 4 -> probe
failed 'IRQ index 1 not found').
- clk-rv1106.c: CLK_CORE_MCU (SCR1 core clock) marked CLK_IGNORE_UNUSED -
6.18's clk_disable_unused() was switching off the coprocessor clock so a
loaded firmware never ran (5.10 left it on).
- Open SCR1 echo firmware (scr1-echo/, 154B RV32IMC) + load/test scripts;
A2B_INTEN on the MCU side + CMD-then-DAT (DAT=doorbell) order. Loaded via the
proven hpmcu.rs SRAM path; do NOT kill warden-flared (dw-wdt). mailbox/VERIFIED.md.
NPU (open GPL rknpu 0.9.2 kernel driver on 6.18):
- DT fix: base npu node lacks interrupt-names, driver requests IRQ byname
'npu_irq' -> probe bailed -ENXIO. Added interrupt-names='npu_irq'.
- Verified: [drm] Initialized rknpu 0.9.2 on minor 1; /dev/dri/card1;
rknpu_version_test PASS (0.9.2 + hw version, full power/clock/reset path).
- Honest ceiling: open compute (regcmd compiler) is a from-scratch ~person-year
RE project, no RV1106 prior art; ship the driver, no blob. npu/VERIFIED.md.
DRIVER-PARITY + CAPABILITIES-AUDIT updated; dts snapshot refreshed.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017wB8KB3MMQztRDXCMCkPrf
RTC: ported the vendor rockchip,rv1106-rtc driver (rtc-rockchip.c) to 6.18 — one
API delta (rtc_register_device -> devm_rtc_register_device). Verified on
warden-c8a3: /dev/rtc0 registers and reads.
tsadc thermal: ported the rv1106 data + rk_tsadcv9_initialize + the TSADCV9/VOGRF
macros + code table from the vendor; adapted .chn_id[SENSOR_CPU] -> .chn_offset
for 6.18. Verified: thermal_zone0 "soc-thermal" reads 39.8 C.
i2s-tdm: rv1126 fallback compatible added (DAI builds; sound card needs the acodec
port next). saradc still -22 (clk-rv1106 SARADC divider — deferred).
Includes the NPU + RGA open-source port plans (research): rknpu kernel driver is a
small port (RV1106 config already in the vendor driver; 4 dead-code headers need
compat stubs) but no open userspace exists for this NPU gen; RGA = port the vendor
char-dev rga3 driver (WardenOS's librga uses /dev/rga, not V4L2), + a cma pool +
hrtimer_setup. All ports are open source (vendor C source / mainline siblings).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017wB8KB3MMQztRDXCMCkPrf
