The repo's documentation framed it as a support repo for one product
(WardenOS). Since going public the real audience is anyone with a Luckfox
Pico 86 Panel: a maintained 6.18 kernel, an off-device development loop,
and a device simulator that exist nowhere else for this board. Reframe the
README and top-level docs board-first, with WardenOS documented as the
downstream consumer it is (ADR-0008).
Also an editorial pass over the whole doc set:
- every H1/H2 is now a short title, not a sentence (ADRs, qemu/, patches/,
drivers/, architecture, NPU feasibility, config-lint, payload); workflow
flowchart titles fixed at the source in tools/flowgen.py and regenerated
with fresh bench numbers
- README Quick Start commands verified against the scripts; requirements
corrected (curl, bare python, gcc >= 14) and the MC/DC gate added as a
step (run green locally on gcc 14.2)
- dropped the 'needs python (not python3)' vendor dig: build-kernel.sh
inherited the same requirement (filed #10 to remove it)
- glossed MC/DC and HPMCU on first use; marked the tests/uboot-ab
reference as flare-edge; deduplicated the three-simulator list into the
root README table
The c8a3 brick was a memory-map fault no behavioural sim can catch: a
boot-loaded coprocessor firmware dropped at 0x40000, which is a reserved-memory
carve-out on Thunder-Boot boards but plain kernel RAM on ours. config-lint is
the static gate for it — parse the rkbin loader .ini for every LOADERn=Hpmcu
LOAD_ADDR, parse the target devicetree for reserved-memory ranges, fail if any
MCU load lands outside a reservation.
Tests encode the brick as a regression against the REAL Thunder-Boot .ini
(Hpmcu@0x40000): fails with no rtos@40000 node, passes once reserved; our
board's non-TB loader (no boot-loaded MCU) always passes. 6/6 green; CLI
verified against the on-disk rkbin .ini files.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017wB8KB3MMQztRDXCMCkPrf
BFE Engineering