/* --- M5: AIC8800DC wifi/BT power sequencing --- */
	sdio_pwrseq: sdio-pwrseq {
		compatible = "mmc-pwrseq-simple";
		pinctrl-names = "default";
		reset-gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
	};
};

/* --- console --- */
&uart2 {
	status = "okay";
};

/* --- eMMC rootfs (M3) --- */
&emmc {
	bus-width = <8>;
	cap-mmc-highspeed;
	mmc-hs200-1_8v;
	non-removable;
	status = "okay";
};

/* --- M5: AIC8800DC wifi/BT SDIO (on &sdmmc, mmc@ffaa0000 — NOT &sdio) --- */
&sdmmc {
	max-frequency = <50000000>;
	bus-width = <4>;
	cap-sd-highspeed;
	cap-sdio-irq;
	keep-power-in-suspend;
	non-removable;
	rockchip,default-sample-phase = <90>;
	supports-sdio;
	mmc-pwrseq = <&sdio_pwrseq>;
	pinctrl-names = "default";
	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_bus4 &sdmmc0_det>;
	status = "okay";
};

/* --- batch 1: mainline peripherals (wire DT + config) --- */
&uart1 {