On the RV1106 the boot firmware does not enter the kernel in HYP mode and leaves CNTVOFF non-zero. The DT timer node lists no virtual-timer PPI, so the kernel keeps time on the physical counter, while the arm32 vDSO always reads the virtual one: on bench a clock_gettime() ran 738.9 s ahead of the kernel clock (pure offset, -0.1 ppm over 30 s) and every absolute deadline taken from it expired minutes late (flare-edge#2319, the #2311 reset loop). New patch 82-arch-timer-vdso-phys-counter.patch: - rv1106.dtsi and rv1106-warden-m2.dts: the timer node carries arm,cpu-registers-not-fw-configured. The kernel keeps the physical timer it uses today, and arch/arm/kernel/vdso.c drops the vDSO clock symbols, so libc goes straight to the syscall. - arm_arch_timer.c: on arm32, a kernel on the physical counter without HYP mode sets the counter's vdso_clock_mode to VDSO_CLOCKMODE_NONE, the safety net for a device tree without the property. QEMU -M virt (virtual PPI present) is unchanged. tests/arch-timer/check-vdso-counter.py checks both guards in the patched tree; CI's patches-apply job runs it and its 12 regression cases. Fixes #35 Refs flare-edge#2319 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KerYPVh72hhNgKi3wS5ijG
The Kernel Patch Series
The delta that forward-ports the vendor Rockchip 5.10.160 RV1106 support onto a
pristine upstream linux-6.18.46, as a reviewable, subsystem-split series. The
series applies cleanly, in order, onto pristine 6.18.46 (git apply --check; a fix
patch such as 82 edits files that an earlier patch adds), and the whole set
reproduces the 223-file / ~136K-line delta that boots and is hardware-verified on
warden-c8a3 (see ../kernel/rv1106-enablement/).
Build it with ../build/build-kernel.sh (fetch pristine -> apply these -> configure
with ../build/warden_defconfig -> zImage + rv1106-warden.dtb).
The Series
| Patch | Scope |
|---|---|
05-build-wiring.patch |
top-level drivers/{Kconfig,Makefile} (wire in rknpu) |
10-clk-rv1106.patch |
CRU clock driver (clk-rv1106.c, reuses rv1126 data) |
15-pinctrl.patch |
pinctrl-rockchip RV1106 iomux |
20-arch-dts-bindings.patch |
arch/arm DTs (rv1106.dtsi, rv1106-warden.dts, pinctrl), mach, configs, include/dt-bindings |
25-usb-phy.patch |
inno-usb2 phy |
27-usb-phy-tuning.patch |
inno-usb2 phy: RV1106 signal-quality register tuning |
29-usb2phy-no-blind-otg-sm.patch |
inno-usb2 phy: stop the OTG/charger state machines running blind |
30-drm-vop-panel-rgb.patch |
VOP (rgb_dclk_pol=0 + WIN1 scanout), panel-simple bus-format, rockchip_rgb |
35-mailbox-hpmcu.patch |
rockchip-mailbox (rv1106 num_chans=1) |
40-pvtm-soc.patch |
PVTM (core+pmu) + include/soc/rockchip/pvtm.h |
45-npu-rknpu.patch |
open GPL rknpu 0.9.2 driver + rknpu_ioctl.h uapi |
50-rga.patch |
RGA 2D (rga3) + drivers/video wiring |
60-wifi-aic8800.patch |
out-of-tree AIC8800 wifi/BT (the 88.5K-line vendor blob) |
70-audio-codec.patch |
rv1106_codec + I2S wiring |
80-misc-thermal-rtc-adc.patch |
tsadc, rtc-rockchip, saradc, trng, otp, gmac, goodix touch |
82-arch-timer-vdso-phys-counter.patch |
arch timer: keep the arm32 vDSO clock off the virtual counter while the kernel times on the physical one (CNTVOFF left non-zero by the boot firmware, #35); checked by tests/arch-timer/check-vdso-counter.py |
90-kconfig-no-python-symbol.patch |
drops DRM_MSM_VALIDATE_XML so the expanded .config (and KCONFIG_SHA256) does not depend on the host python (#19) |
License
Everything in this directory is a derivative work of the Linux kernel and of GPL-2.0 vendor kernel code: GPL-2.0-only (or the per-file SPDX identifier where one is present), the same license the whole repository carries.
Provenance & regeneration
Baseline: linux-6.18.46 from kernel.org (build/linux-6.18.46.tar.xz.sha256
pins the tarball). The series was generated by overlaying the hardware-verified
source tree onto pristine (build artifacts excluded) and splitting git diff by
subsystem. Licensing/origin of each block is tracked in
../kernel/rv1106-enablement/PROVENANCE.md.
Whitespace: 60-wifi-aic8800.patch carries the vendor blob's trailing-whitespace
verbatim; git apply --whitespace=nowarn (the build wrapper) accepts it. Do not
re-flow vendor code; it must stay diffable against future vendor drops.