bfe-core1106-sdk/docs/architecture.md

warden-sdk architecture

How the SDK makes WardenOS buildable, testable, and hardenable without a panel in the loop. Grounded in a full survey of the current flare-edge firmware (the seam inventory below is from that survey, not aspiration).

1. The problem the seams solve

The firmware touches RV1106 hardware through a grab-bag of mechanisms, each tested (or not) differently. Today:

Block	Where	Access	Test seam today	Fails on host by
Registers / SRAM (CRU reset, HPMCU mailbox)	flared/src/devmem.rs, hpmcu.rs	/dev/mem mmap peek/poke32	none — zero tests	(would fault; not exercised)
HPMCU / RISC-V coproc	flared/src/hpmcu.rs	via devmem + firmware blob load	WARDEN_HPMCU_FW redirects the blob path only	env gate disables it
NPU load	ui-src/.../sysmon.c	read /proc/rknpu/load	none — literal path	file absent → "NPU absent"
RGA (2D blit)	ui-src/.../warden_rga.c	librga improcess + dma-heap ioctl	compile-time #if WARDEN_USE_RGA	#if off → LVGL software path
RS485 daemon	warden-modbus/modbus_engine.c	open("/dev/ttyS4")	recompile -DRS485_PORT=<pty>	(recompiled for a pty)
RS485 panel client	ui-src/.../modbus.c	AF_UNIX socket	WARDEN_MODBUS_SOCK env override	socket absent → "unavailable"
Relays / GPIO	ui-src/.../relays.c	/sys/class/gpio sysfs	none — literal paths	path absent → "unavailable"
Slot metadata	flared/src/slotctl.rs	misc partition + /proc/cmdline	WARDEN_MISC_DEV, WARDEN_CMDLINE_FILE env overrides	(redirected to scratch files)

Three patterns coexist: compile-time #if (RGA), env-override (modbus socket, misc dev, cmdline, hpmcu fw), and fails-soft-because-the-path-is-absent (NPU, relays, devmem-would-fault). The last is not a test seam — you cannot inject "relay 1 is ON" or "NPU at 80%", only "absent". The SDK's job is to turn all of these into one deliberate seam per block with a real backend and a sim backend.

2. The seam taxonomy

Two seam kinds cover everything above:

• Register/SRAM seam → a trait. MemBus (sim/src/membus.rs): peek32/poke32 at a physical address. Real backend = flared devmem.rs mmap; sim backend = SimBus (in-memory word map, Clone so two "cores" alias shared memory). The HPMCU watchdog and the CRU reset ladder both ride this. Built.
• Resource-path seam → env-override + injection. For file/socket/sysfs paths (/proc/rknpu/load, /sys/class/gpio/*, /dev/ttyS4, misc), generalize the existing WARDEN_MISC_DEV/WARDEN_MODBUS_SOCK pattern into one rule: every device/proc/sys path a driver opens is resolved through a single indirection (warden_hw_path("npu.load") in C, an env-overridable const in Rust), so a test points it at a fake file/fifo the sim writes. No LD_PRELOAD, no fake mounts.

RGA stays compile-time — its #if WARDEN_USE_RGA already cleanly isolates the librga/dma-heap calls behind the always-compiled LVGL draw-unit glue; the sim backend is "a fake improcess that records the blits it was asked to do", swapped behind the same #if, so the offload dispatch logic gets tested even though the blit itself is modelled.

3. The simulator (sim/)

A host Rust library modelling the hardware the vendor SDK cannot, so driver and supervisor logic runs in CI with no panel.

• membus — register/SRAM bus. Done. MemBus trait + SimBus.
• hpmcu — the RISC-V watchdog coprocessor. Done. Faithful port of hpmcu/watchdog/main.c's state machine (boot-grace, heartbeat-timeout, disarm, fire) against a SimBus mailbox, virtual clock, 7 tests including the arm-within-grace no-boot-loop safety property. This is the model that would have let the boot-loaded-watchdog logic be validated before the flash that bricked a bench unit (though the layout fault — a load address in unreserved kernel RAM — is a target-config check, §5, not a sim property).
• cru — reset ladder. Done. CruSim on MemBus (so flared::devmem::hard_reset's ladder is host-tested against the known glb_srst_fst / DW-watchdog registers), plus the boot-mode register's survives-warm-reset / cleared-by-POR behaviour (the MaskRom recovery maneuver). flared's devmem now has a matching Bus seam and unit tests that assert the shipped ladder pokes the confirmed offset, never the wrong-SoC one.
• modbus — RS-485 device end. Done. ModbusSlave: a byte-in/byte-out RTU slave (CRC16 byte-identical to the master, FC 0x01–0x06/0x0F/0x10/0x11, exception replies, and fault injection — silent-drop and forced-NAK) so warden-modbus's master can be hardened to MC/DC against realistic device behaviour with no serial hardware. MEI (0x2B/0x0E) identification is the documented follow-up.
• npu — NPU load model. Done. NpuSim models /proc/rknpu/load (the exact "NPU load: N%" text the sysmon reads) behind the path seam, so the load-readout UI is host-testable. NPU compute is explicitly out of scope — no inference runs here.
• rga — 2D blitter offload. Done. RgaSim, a recording improcess fake with a programmable IM_STATUS, so the RGA offload-dispatch and CPU-fallback logic is exercised behind the #if WARDEN_USE_RGA seam without librga; wired into the rga_improcess benchmark.
• Next: MEI (0x2B/0x0E) Modbus identification; the Tier-2 driver sources (modbus_engine.c, warden_rga.c) migrate in with the flare-edge unification (ADR-0005) — their hardware ends are already modelled and tested above.

Integration with flare-edge: flared implements MemBus for /dev/mem and gains #[cfg(test)] tests driving its real arm/beat logic against HpmcuSim. This needs warden-sdk reachable as a Cargo dependency in CI — i.e. a remote for this repo, which is a [maintainer]-go-ahead item (credential/remote creation). Until then the firmware-side seam and a local test double land in flare-edge, unified with sim/ once the dependency exists. No duplication of logic — only the tiny trait.

4. Driver hardening (the "port + harden to MC/DC" goal)

"100% MC/DC on 100% of drivers" is infeasible literally: ~97% of driver LOC is vendor blobs (AIC8800 wifi = 88.5K lines). Tiered target:

• Tier 1 — our own hardware code → real MC/DC. Method: the proven tests/uboot-ab pattern — extract the unit behind a small injectable seam, mock its world, build -fcondition-coverage, enforce with the shared drivers/enforce-mcdc.sh (gcc-14 gcov --conditions) in the CI mcdc job. Done here now: relays.c (40/40 conditions) and freshness.c (66/66), both at 100% MC/DC and CI-enforced. Migrate in next: the modbus master (modbus_engine.c) and the RGA wrapper's dispatch — their hardware ends are already modelled and tested in sim/ (modbus, rga); the driver sources move in with the flare-edge unification (ADR-0005). The HPMCU supervisor and devmem reset ladder are covered Rust-side (sim/hpmcu, sim/cru).
• Tier 2 — near-mainline small drivers → branch coverage + fault injection.
• Tier 3 — vendor blobs (AIC8800, MPP/ISP/RGA libs) → fault-injection hardening behind the seam, not MC/DC. The AIC8800 SDIO-wedge Tier-1 fix + the designed reset-on-ETIMEDOUT recovery are this tier: test the recovery path against an injected wedge on the MemBus/SDIO seam, since the blob itself is untestable.

Every seam gets a fault-injection mode (a wedged SDIO link, a stalled MCU heartbeat, an RGA timeout, a GPIO write EIO) so recovery code is tested against failure, not just the happy path.

5. Target-config checks (a class the sim cannot cover)

The brick was a memory-map fault: the boot-loaded MCU's load address (0x40000) is a reserved carve-out on Thunder-Boot boards but plain kernel RAM on ours. No behavioural sim catches that — it needs a static check against the target DT: "every address the MCU/coprocessor code loads to is inside a reserved-memory node." warden-sdk owns these config-lint checks (idblock loader .ini vs DT reservations, partition table vs image sizes, vermagic vs kernel) as CI gates, so a mistake is caught before a flash rather than on the bench.

Built: tools/config-lint implements the first and most important of these — the MCU-load-vs-reserved-memory gate. It parses the rkbin loader .ini for every LOADERn=Hpmcu firmware and its [LOADERn_PARAM] LOAD_ADDR, parses the target devicetree (.dts, or dtc -I dtb output in CI) for reserved-memory ranges, and fails if any MCU load lands outside a reservation. Its test suite encodes the c8a3 brick itself: the real Thunder-Boot .ini (Hpmcu @ 0x40000) fails against a DT with no rtos@40000 node and passes once the reservation is added. Next target-config checks: partition-table-vs-image-size and vermagic-vs-kernel.

6. Kernel forward-port (done — see ADR-0001)

A self-built Linux 6.18.46, forward-ported directly from the vendor 5.10.160 tree onto our Buildroot LTS/uClibc base — not the plan44/OpenWrt 6.6 fork this section originally reached for. ADR-0001 records why that was superseded: plan44 drops Buildroot for OpenWrt/musl and ships no AIC8800 kmod, so it was a swap-out, not a forward-port. Mainline alone was not viable either (no DT/clk/display/RGA/NPU/ flash-boot upstream for RV1106); the port reuses the already-in-mainline rv1126 register data where it matches and carries our deltas as the reviewable patches/ series. This is done and hardware-verified on warden-c8a3 — clk, pinctrl, eMMC, GMAC, TRNG, OTP, SARADC/TSADC, RTC, USB host, PWM/backlight, VOP display, GT911 touch, AIC8800 wifi, RGA, I2S audio, HPMCU mailbox, the open NPU driver, and PVTM all boot. The dominant risk was the struct-ABI break (the VLAN saga), mitigated by shipping the kernel move as one matched boot+oem image, never a partial reflash. build/build-kernel.sh (the hermetic build) and the patches-apply CI gate keep the series honest against pristine 6.18.46; provenance is in patches/README.md and kernel/rv1106-enablement/.

7. Order of work

1. Simulator core — membus, hpmcu, the cru reset ladder, modbus, plus the rga/npu models. Done.
2. C-driver MC/DC harnesses — relays.c and freshness.c at 100% MC/DC, CI-gated via the shared drivers/enforce-mcdc.sh. Done (the first C coverage gate).
3. flared devmem/hpmcu seam + tests — firmware-side trait, unified with sim/ once flare-edge consumes warden-sdk (a separate, [maintainer]-gated step). Pending.
4. Config-lint CI gates (§5) — the brick-class of bug. Done.
5. Hermetic kernel build (build/build-kernel.sh + the patches-apply gate). Done.
6. Kernel 5.10→6.18.46 forward-port (§6, ADR-0001). Done (hardware-verified).