Compare commits

...
10 Commits
Author SHA1 Message Date
noahandClaude Opus 4.8 a4d0cb65f0 fix(gui,vnish): hashrate 0-vs-dash, paused health colours, VNish per-hashboard faults
- Hashrate cell: a readable 0 hashrate now shows "0.00T" instead of a dash. The
  dash is reserved for an unreadable/absent hashrate. New MinerRow.hashrate_known
  records whether the miner reported a value; combined_si/num_value key off it,
  and scan/fixtures set it from data.hashrate.is_some().
- Paused-miner Health icons: the control board (brain) and PSU keep their true
  health (green when fine) instead of turning blue; fans turn blue only when
  actually stopped (0 RPM) and stay green while spinning; hashboards stay blue
  while paused (idle is the expected state).
- VNish per-hashboard faults: DataField::Messages now also reads the summary
  chains (chip_statuses red/orange + per-chain state) and emits one message per
  faulted board, attributed to MinerComponent::HashBoard{idx}, so the Health
  column reds the specific board and its tooltip carries the fault instead of it
  landing on the brain. Applied to v1_2_0 and v1_3_0. patch 0032.

Verified live: VNish 10.7.1.25 -> "Hashboard 2: 1 degraded chip(s)" on board idx
1; healthy 10.7.1.122 -> no messages. 93 unit tests pass.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Djv3oncM4LxTS5tb61Ako6
2026-09-24 15:14:20 -06:00
alkane-ci 29b9b17c67 ci: refresh README badges [skip release] 2026-09-24 19:32:29 +00:00
noahandClaude Opus 4.8 8deecf3558 fix(gui): paused/stopped miners shown as broken (red) instead of paused (blue)
A miner an operator has stopped (e.g. 10.4.1.122, VNish miner_state "stopped" ->
OperatingState::Stopped) was read as broken: red hashboards and counted under "not
hashing" instead of "Paused".

Two causes:
1. is_paused() only matched the literal "pause" substring, so "Stopped"/"Stopping"/
   "Suspended" -- every other firmware's word for an intentional, resumable halt --
   fell through to not-paused. Now matches pause/stop/suspend (Error stays broken).
2. encode_component_health applied the paused-blue treatment to hashboards only
   (round 19 #19), so a paused miner's idle fans/power still rendered red. A stopped
   miner's off components are expected, not faults: colour every reported component
   blue when paused (an undetected/Unreachable one still stays grey -- "not present"
   is not "paused").

Verified live against 10.4.1.122 on a headless build: the row now shows all-blue
health (power grey, honestly unreachable) and counts under the Paused KPI, where it
previously showed red boards + "not hashing".

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Djv3oncM4LxTS5tb61Ako6
2026-09-24 13:08:18 -06:00
alkane-ci 3a6a190ce1 ci: refresh README badges [skip release] 2026-09-24 16:25:36 +00:00
noahandClaude Opus 4.8 1f0a4cbe76 fix(gui): health icon tooltips never showed -- tip area used wrong coordinates
Round 19 #2. The health-icon hover tooltips never appeared because the GTK
query-tooltip handler built the per-icon "tip area" from gtk_tree_view_get_cell_area
(BIN-WINDOW coordinates) and passed it to gtk_tooltip_set_tip_area, which expects
WIDGET coordinates. The area was offset upward by the column-header height, so it
did not contain the pointer, and GTK suppresses any tooltip whose tip area excludes
the cursor -- so nothing showed. The Errors column worked because it sets no tip
area. Prior fixes (rounds 15/18/19) only tuned the icon slot math, which was already
correct; the coordinate-system mismatch was the actual cause.

Convert the slot rectangle from bin-window to widget coordinates with
gtk_tree_view_convert_bin_window_to_widget_coords before gtk_tooltip_set_tip_area.
The slot hit-test (block_left/adv, in bin-window coords) is unchanged and still
matches DrawShape's uniform health-icon advance. wx-rs patch 0005.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Djv3oncM4LxTS5tb61Ako6
2026-09-24 10:03:58 -06:00
alkane-ci fbc43216fb ci: refresh README badges [skip release] 2026-09-24 00:27:48 +00:00
noahandClaude Opus 4.8 a4fcb6e763 asic-rs telemetry: VNish fan%/temps, WhatsMiner chip type, and auto-tuner status
Round 19 #10 telemetry extension, live-verified. Two logical changes (patches 0030
and 0031) shipped together; they populate existing GUI columns plus one new "Tuner"
column.

VNish + WhatsMiner (patch 0030, no core/GUI change):
- VNish v1_2_0 + v1_3_0: fan duty % (summary /miner/cooling/fan_duty) and board temp
  thresholds (settings restart_temp -> dangerous, auto cooling param -> target).
  Live-verified 10.4.1.50 (81 / 90 / 65). No PSU serial exposed -> stays None.
- WhatsMiner chip type (per user, do not drop): v1/v2 summary "Chip Data" merged
  into hashboards -> BoardData.chip_type (first token); v3 chipdataN -> chip_type and
  hash-board ("K40") -> hashboard_model.

Auto-tuner status (patch 0031):
- New DataField::TunerStatus + MinerData.tuner_status (Option<String>), riding the
  existing GetOperatingState trait via a defaulted parse_tuner_status.
- Braiins: performance/tuner-state overall_tuner_state via the BOS+ TunerState enum
  (Disabled/Stable/Tuning/Error/Continuous/Preheat) -- mapping from the bos-plus-api
  proto. ePIC: PerpetualTune -> Off/Optimized/Tuning. Others -> None.
- GUI: new "Tuner" column (Health & status category, auto-hidden when empty).

All values live-verified against the corpus miners (ePIC 10.4.1.6, LuxOS 10.4.1.60,
Braiins 10.4.1.83, VNish 10.4.1.50). Fixture tests assert every parsed value.
ALL_COLUMNS 71 -> 72.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Djv3oncM4LxTS5tb61Ako6
2026-09-23 18:10:57 -06:00
alkane-ci 76409b0d3b ci: refresh README badges [skip release] 2026-09-23 23:57:28 +00:00
noahandClaude Opus 4.8 4aec6d40ad asic-rs telemetry: board temp thresholds -> target/hot/dangerous (LuxOS, Braiins; remap ePIC)
Round 19 #10 telemetry extension. Live-verified against the corpus miners, this
remodels the board temperature thresholds to item #10's target/hot/dangerous scheme
and adds the LuxOS and Braiins backends. Supersedes the ePIC-only critical/shutdown
model shipped in v0.72.0.

Core (asic-rs-core):
- MinerData: temp_critical/temp_shutdown -> temp_target/temp_hot/temp_dangerous.
- parse_temperature_limits (defaulted on the existing GetFluidTemperature trait)
  now returns (target, hot, dangerous); parse_data wires all three fields.

Backends (each reads an already-fetched or single command; live-verified):
- LuxOS: new tempctrl RPC; ChipTarget/ChipHot/ChipDangerous (live 10.4.1.60 = 83/93/100).
- Braiins v25_07 + v26_04: configuration/constraints cooling_constraints defaults
  (live 10.4.1.83 = 60/80/90); WEB_CONSTRAINTS already fetched for tuning caps.
- ePIC remap: Shutdown Temp -> hot, Critical Temp -> dangerous, no target.
- VNish (settings restart_temp/param) handled in a follow-up (needs settings auth);
  Antminer/WhatsMiner expose no thresholds -> (None,None,None).

GUI: the two temp columns (Critical/Shutdown) become three (Target/Hot/Dangerous),
right-aligned, Temperature category, auto-hidden when empty. MinerRow gains
temp_target_c/temp_hot_c/temp_dangerous_c; to_row reads them. ALL_COLUMNS 70 -> 71.

Fixtures captured from live: luxminer tempctrl.json, braiins configuration_constraints.json.
Fixture tests for epic, luxminer, braiins v26_04 assert the parsed thresholds. Patch 0029.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Djv3oncM4LxTS5tb61Ako6
2026-09-23 17:40:33 -06:00
alkane-ci 33a116d9fd ci: refresh README badges [skip release] 2026-09-23 23:10:06 +00:00
34 changed files with 2337 additions and 128 deletions
+9 -9
View File
@@ -1,11 +1,11 @@
{
"bench_parse_line_near_max_addrs": 2909519.0,
"bench_parse_targets_many_ranges_near_cap": 231595485.0,
"bench_render_cells": 23139168.0,
"bench_sort_by_each_column": 4481425.0,
"bench_targets_to_cidrs_large_range": 3358390.0,
"bench_upsert_cold_start_population": 32181374.0,
"bench_view_pipeline": 1038940.0,
"bench_view_pipeline_default_sort": 1858357.0,
"bench_view_pipeline_with_filter": 1450722.0
"bench_parse_line_near_max_addrs": 3901086.0,
"bench_parse_targets_many_ranges_near_cap": 290127400.0,
"bench_render_cells": 29363207.0,
"bench_sort_by_each_column": 4468641.0,
"bench_targets_to_cidrs_large_range": 3605972.0,
"bench_upsert_cold_start_population": 91616782.0,
"bench_view_pipeline": 1396303.0,
"bench_view_pipeline_default_sort": 2723906.0,
"bench_view_pipeline_with_filter": 1491721.0
}
+4 -4
View File
@@ -1,5 +1,5 @@
<svg xmlns="http://www.w3.org/2000/svg" width="147.5" height="20" role="img" aria-label="bench: +21.6% vs prev">
<title>bench: +21.6% vs prev</title>
<svg xmlns="http://www.w3.org/2000/svg" width="147.5" height="20" role="img" aria-label="bench: +52.9% vs prev">
<title>bench: +52.9% vs prev</title>
<linearGradient id="s" x2="0" y2="100%">
<stop offset="0" stop-color="#bbb" stop-opacity=".1"/>
<stop offset="1" stop-opacity=".1"/>
@@ -13,7 +13,7 @@
<g fill="#fff" text-anchor="middle" font-family="Verdana,Geneva,DejaVu Sans,sans-serif" font-size="11">
<text x="22.2" y="15" fill="#010101" fill-opacity=".3">bench</text>
<text x="22.2" y="14">bench</text>
<text x="96.0" y="15" fill="#010101" fill-opacity=".3">+21.6% vs prev</text>
<text x="96.0" y="14">+21.6% vs prev</text>
<text x="96.0" y="15" fill="#010101" fill-opacity=".3">+52.9% vs prev</text>
<text x="96.0" y="14">+52.9% vs prev</text>
</g>
</svg>

Before

Width:  |  Height:  |  Size: 955 B

After

Width:  |  Height:  |  Size: 955 B

+4
View File
@@ -128,6 +128,10 @@ impl Board {
cpu,
board_code,
hashrate_ths: self.hashrate,
// A miner that is mining or paused reported a current hashrate (a paused
// one reports 0 -> "0.00T"); the blank stock demo miner reports none, so
// it keeps the "-" dash (round 19 follow-up).
hashrate_known: self.mining || self.paused,
expected_ths: self.expected,
board_hashrates,
board_voltages,
+100 -31
View File
@@ -82,6 +82,17 @@ pub fn format_hashrate_ths(ths: f64) -> Option<String> {
si_mantissa_and_prefix(ths * 1e12).map(|(num, prefix)| format!("{num}{prefix}"))
}
/// The current-hashrate reading for the combined Hashrate cell, distinguishing a
/// reported zero from an unreadable one: `Some("0.00T")` when the firmware reported
/// a hashrate that rounds to zero, `Some("<n>T")` for a positive reading, and
/// `None` (renders as the "-" dash) only when the hashrate is unreadable/absent.
pub fn format_hashrate_actual(ths: f64, known: bool) -> Option<String> {
if !known {
return None;
}
Some(format_hashrate_ths(ths).unwrap_or_else(|| "0.00T".to_string()))
}
/// A hashrate number (no unit) for a given mining algorithm (round 18 #7). asic-rs
/// stores every hashrate normalised to "TH/s", but for Equihash the underlying
/// count is Sol/s that it reinterprets through the base H unit, so `ths * 1e12`
@@ -140,8 +151,8 @@ fn join_board(vals: &[f64], f: impl Fn(f64) -> String) -> String {
/// slash, prefix-only unit): blank when neither is known, the bare actual when
/// only it is known, "-/<expected>" when only the expected is known, and
/// "<actual>/<expected>" when both are (e.g. "80.5T/95.0T").
fn combined_si(actual_ths: f64, expected_ths: f64) -> String {
match (format_hashrate_ths(actual_ths), format_hashrate_ths(expected_ths)) {
fn combined_si(actual_ths: f64, actual_known: bool, expected_ths: f64) -> String {
match (format_hashrate_actual(actual_ths, actual_known), format_hashrate_ths(expected_ths)) {
(None, None) => String::new(),
(Some(a), None) => a,
(None, Some(e)) => format!("-/{e}"),
@@ -496,6 +507,10 @@ pub struct MinerRow {
pub faults: Vec<Fault>,
// performance
pub hashrate_ths: f64,
/// Whether the firmware actually reported a current hashrate. A reported 0
/// renders as "0.00T"; only an unreadable/absent reading (this is false) shows
/// the "-" dash. `hashrate_ths` alone can't distinguish the two (both are 0.0).
pub hashrate_known: bool,
/// Rolling average hashrate windows in TH/s (round 19 #10, T2): 1m/5m/15m/24h.
/// 0.0 means the firmware does not report that window.
pub hashrate_1m_ths: f64,
@@ -563,10 +578,11 @@ pub struct MinerRow {
/// (round 11 #17).
pub env_temp_c: f64,
pub outlet_temp_c: f64,
/// Board temperature safety thresholds in Celsius (round 19 #10, T3); `None`
/// when the firmware does not report them (ePIC today).
pub temp_critical_c: Option<f64>,
pub temp_shutdown_c: Option<f64>,
/// Board temperature safety thresholds in Celsius (round 19 #10, T3): target /
/// hot / dangerous. `None` per field when the firmware does not report it.
pub temp_target_c: Option<f64>,
pub temp_hot_c: Option<f64>,
pub temp_dangerous_c: Option<f64>,
/// Individual cooling-fan RPMs (empty if unknown). PSU fan is tracked
/// separately below since it is not part of the cooling-fan set.
pub fan_rpms: Vec<f64>,
@@ -608,6 +624,8 @@ pub struct MinerRow {
pub uptime_secs: u64,
pub light_flashing: Option<bool>,
pub operating_state: String,
/// Auto-tuner status label (round 19 #10, T3); empty when not reported.
pub tuner_status: String,
pub is_mining: bool,
pub slow: bool,
/// Not-mining because an operator paused it (distinct from simply idle);
@@ -1043,8 +1061,20 @@ impl MinerRow {
/// counted as operator-paused when it is not currently mining and its raw
/// operating-state string says so (case-insensitively), shared by the live
/// scan (`scan::to_row`) and the fixtures/tests.
///
/// "Paused" covers every intentional, resumable halt -- operator- or
/// firmware-initiated -- not just the literal "Paused" state: a miner an operator
/// stopped is halted on purpose, not broken, so it must read blue in Health and
/// count under the Paused KPI rather than "not hashing". Firmwares spell it
/// differently: VNish reports "stopped", Braiins uses Paused/Stopped/Suspended,
/// others "paused". A failure is a distinct Error state (never matched here) and
/// still reads as broken (round 19 #19).
pub fn is_paused(operating_state: &str, is_mining: bool) -> bool {
!is_mining && operating_state.to_lowercase().contains("pause")
if is_mining {
return false;
}
let s = operating_state.to_lowercase();
s.contains("pause") || s.contains("stop") || s.contains("suspend")
}
/// The typed-confirmation gate for the irreversible firmware-flash action: the
@@ -1113,10 +1143,12 @@ pub enum Column {
FluidTemp,
EnvTemp,
OutletTemp,
/// Board temperature safety thresholds (round 19 #10, T3). Populated where the
/// firmware reports them (ePIC today); auto-hidden when empty.
CriticalTemp,
ShutdownTemp,
/// Board temperature safety thresholds (round 19 #10, T3): target / hot /
/// dangerous. Populated where the firmware reports them (LuxOS full set, ePIC
/// hot+dangerous, Braiins defaults, VNish target+dangerous); auto-hidden empty.
TargetTemp,
HotTemp,
DangerousTemp,
PsuFan,
/// PSU identity + rated voltage envelope (round 17 R5). Populated where the
/// firmware exposes PSU info (ePIC today).
@@ -1142,6 +1174,8 @@ pub enum Column {
Uptime,
Light,
OperatingState,
/// Auto-tuner status label (round 19 #10, T3); Braiins/ePIC today.
Tuner,
BestShare,
SessionBestShare,
TuningPercent,
@@ -1175,7 +1209,7 @@ pub enum Column {
/// Every column, in registry order. Ip first, then the default-visible set
/// (UI-SPEC order), then all remaining metrics.
pub const ALL_COLUMNS: [Column; 70] = [
pub const ALL_COLUMNS: [Column; 72] = [
Column::Ip,
Column::Hashrate,
Column::Hashrate1m,
@@ -1203,8 +1237,9 @@ pub const ALL_COLUMNS: [Column; 70] = [
Column::FluidTemp,
Column::EnvTemp,
Column::OutletTemp,
Column::CriticalTemp,
Column::ShutdownTemp,
Column::TargetTemp,
Column::HotTemp,
Column::DangerousTemp,
Column::PsuFan,
Column::PsuVersion,
Column::PsuSerial,
@@ -1227,6 +1262,7 @@ pub const ALL_COLUMNS: [Column; 70] = [
Column::Uptime,
Column::Light,
Column::OperatingState,
Column::Tuner,
Column::BestShare,
Column::SessionBestShare,
Column::TuningPercent,
@@ -1311,8 +1347,9 @@ impl Column {
Column::FluidTemp => "Fluid temp",
Column::EnvTemp => "Env temp",
Column::OutletTemp => "Outlet temp",
Column::CriticalTemp => "Critical temp",
Column::ShutdownTemp => "Shutdown temp",
Column::TargetTemp => "Target temp",
Column::HotTemp => "Hot temp",
Column::DangerousTemp => "Dangerous temp",
Column::PsuFan => "PSU fan (RPM)",
Column::PsuVersion => "PSU version",
Column::PsuSerial => "PSU serial",
@@ -1336,6 +1373,7 @@ impl Column {
Column::Uptime => "Uptime",
Column::Light => "Light",
Column::OperatingState => "State",
Column::Tuner => "Tuner",
Column::BestShare => "Best share",
Column::SessionBestShare => "Session best",
Column::TuningPercent => "Tuning %",
@@ -1359,7 +1397,7 @@ impl Column {
}
Column::Power => 90,
Column::ChipTemp | Column::FluidTemp | Column::EnvTemp | Column::OutletTemp => 95,
Column::CriticalTemp | Column::ShutdownTemp => 105,
Column::TargetTemp | Column::HotTemp | Column::DangerousTemp => 105,
Column::Fan1 | Column::Fan2 | Column::Fan3 | Column::Fan4 | Column::PsuFan => 90,
Column::FanSpeedPercent => 80,
Column::Target => 110,
@@ -1398,6 +1436,7 @@ impl Column {
Column::Error => 160,
Column::Uptime => 100,
Column::OperatingState => 100,
Column::Tuner => 100,
Column::BestShare | Column::SessionBestShare => 110,
Column::PoolUrl | Column::Pool1Url | Column::Pool2Url | Column::Pool3Url => 200,
Column::Pool1Worker | Column::Pool2Worker | Column::Pool3Worker => 150,
@@ -1422,8 +1461,9 @@ impl Column {
| Column::FluidTemp
| Column::EnvTemp
| Column::OutletTemp
| Column::CriticalTemp
| Column::ShutdownTemp
| Column::TargetTemp
| Column::HotTemp
| Column::DangerousTemp
| Column::Fan1
| Column::Fan2
| Column::Fan3
@@ -1464,7 +1504,10 @@ impl Column {
// renders "- / <expected>" (non-empty) in that case, so the generic
// blank check below is not enough on its own.
match self {
Column::Hashrate if r.hashrate_ths <= 0.0 => return None,
// An unreadable hashrate has no numeric value; a reported 0 does (0.0),
// so a filter like "hashrate > 0" excludes a stopped miner but "<= 50"
// still matches it.
Column::Hashrate if !r.hashrate_known => return None,
Column::TotalChips if r.total_chips.is_none() => return None,
_ => {}
}
@@ -1511,8 +1554,9 @@ impl Column {
Column::FluidTemp => SortKey::Num(r.fluid_temp_c),
Column::EnvTemp => SortKey::Num(r.env_temp_c),
Column::OutletTemp => SortKey::Num(r.outlet_temp_c),
Column::CriticalTemp => SortKey::Num(r.temp_critical_c.unwrap_or(none)),
Column::ShutdownTemp => SortKey::Num(r.temp_shutdown_c.unwrap_or(none)),
Column::TargetTemp => SortKey::Num(r.temp_target_c.unwrap_or(none)),
Column::HotTemp => SortKey::Num(r.temp_hot_c.unwrap_or(none)),
Column::DangerousTemp => SortKey::Num(r.temp_dangerous_c.unwrap_or(none)),
Column::Fan1 => SortKey::Num(r.fan_rpms.first().copied().unwrap_or(none)),
Column::Fan2 => SortKey::Num(r.fan_rpms.get(1).copied().unwrap_or(none)),
Column::Fan3 => SortKey::Num(r.fan_rpms.get(2).copied().unwrap_or(none)),
@@ -1570,7 +1614,7 @@ impl Column {
let pool_worker = |i: usize| r.pools.get(i).map(|(_, w)| w.clone()).unwrap_or_default();
match self {
Column::Ip => r.ip.clone(),
Column::Hashrate => combined_si(r.hashrate_ths, r.expected_ths),
Column::Hashrate => combined_si(r.hashrate_ths, r.hashrate_known, r.expected_ths),
// Rolling average windows: a single TH/s value, blank when not reported
// (round 19 #10, T2).
Column::Hashrate1m => format_hashrate_ths(r.hashrate_1m_ths).unwrap_or_default(),
@@ -1612,8 +1656,9 @@ impl Column {
Column::FluidTemp => num(r.fluid_temp_c, 1, " C"),
Column::EnvTemp => num(r.env_temp_c, 1, " C"),
Column::OutletTemp => num(r.outlet_temp_c, 1, " C"),
Column::CriticalTemp => r.temp_critical_c.map(|v| num(v, 0, " C")).unwrap_or_default(),
Column::ShutdownTemp => r.temp_shutdown_c.map(|v| num(v, 0, " C")).unwrap_or_default(),
Column::TargetTemp => r.temp_target_c.map(|v| num(v, 0, " C")).unwrap_or_default(),
Column::HotTemp => r.temp_hot_c.map(|v| num(v, 0, " C")).unwrap_or_default(),
Column::DangerousTemp => r.temp_dangerous_c.map(|v| num(v, 0, " C")).unwrap_or_default(),
// Per-fan RPM: blank (not "-") when the fan index is absent, so a miner
// with fewer fans leaves the extra Fan columns empty and auto-hide can
// drop them (round 19 #8).
@@ -1703,6 +1748,7 @@ impl Column {
None => String::new(),
},
Column::OperatingState => r.operating_state.clone(),
Column::Tuner => r.tuner_status.clone(),
Column::BestShare => r.best_share.map(|v| format_si(v, "")).unwrap_or_default(),
Column::SessionBestShare => {
r.session_best_share.map(|v| format_si(v, "")).unwrap_or_default()
@@ -1729,14 +1775,14 @@ impl Column {
| Column::HbType => (1, "Firmware & board"),
Column::Health | Column::HealthPower | Column::HealthFans | Column::HealthBoards
| Column::Status | Column::Error | Column::Locked | Column::Light
| Column::OperatingState => (2, "Health & status"),
| Column::OperatingState | Column::Tuner => (2, "Health & status"),
Column::Hashrate | Column::HashrateRel | Column::Hashrate1m | Column::Hashrate5m
| Column::Hashrate15m | Column::Hashrate24h | Column::Power | Column::Efficiency
| Column::TuningPercent | Column::BestShare | Column::SessionBestShare
| Column::Uptime | Column::Target | Column::BoardHashrate | Column::BoardVoltage
| Column::BoardFrequency => (3, "Performance"),
Column::ChipTemp | Column::FluidTemp | Column::EnvTemp | Column::OutletTemp
| Column::CriticalTemp | Column::ShutdownTemp => {
| Column::TargetTemp | Column::HotTemp | Column::DangerousTemp => {
(4, "Temperature")
}
Column::Fan1 | Column::Fan2 | Column::Fan3 | Column::Fan4 | Column::PsuFan
@@ -2798,7 +2844,7 @@ mod tests {
#[test]
fn numeric_filter_operators() {
let r = MinerRow { hashrate_ths: 100.0, is_mining: true, ..Default::default() };
let r = MinerRow { hashrate_ths: 100.0, hashrate_known: true, is_mining: true, ..Default::default() };
let c = Column::Hashrate;
let n = |op, a: f64, b: f64| ColFilter::Num { op, a, b }.matches(c, &r);
assert!(n(NumOp::Gt, 50.0, 0.0));
@@ -2819,7 +2865,7 @@ mod tests {
assert_eq!(Column::Firmware.num_value(&r), None, "text column");
assert_eq!(Column::Ip.num_value(&r), None, "IP is text, not numeric");
assert_eq!(Column::Efficiency.num_value(&r), None, "blank numeric -> None");
let r2 = MinerRow { hashrate_ths: 42.0, ..Default::default() };
let r2 = MinerRow { hashrate_ths: 42.0, hashrate_known: true, ..Default::default() };
assert_eq!(Column::Hashrate.num_value(&r2), Some(42.0));
}
@@ -2892,6 +2938,7 @@ mod tests {
let actual_only = MinerRow {
hashrate_ths: 60.0,
hashrate_known: true,
total_chips: Some(210),
..Default::default()
};
@@ -2903,11 +2950,24 @@ mod tests {
expected_chips: Some(228),
..Default::default()
};
assert_eq!(Column::Hashrate.cell(&expected_only), "-/200T", "only expected -> '-/<expected>'");
assert_eq!(Column::Hashrate.cell(&expected_only), "-/200T", "only expected (actual unreadable) -> '-/<expected>'");
assert_eq!(Column::TotalChips.cell(&expected_only), "- / 228");
// A reported zero is a real reading -> "0.00T", never the dash. The dash
// (expected_only above) is reserved for an unreadable actual.
let reported_zero = MinerRow {
hashrate_ths: 0.0,
hashrate_known: true,
expected_ths: 200.0,
..Default::default()
};
assert_eq!(Column::Hashrate.cell(&reported_zero), "0.00T/200T", "reported 0 -> 0.00T, not a dash");
let reported_zero_no_expected = MinerRow { hashrate_ths: 0.0, hashrate_known: true, ..Default::default() };
assert_eq!(Column::Hashrate.cell(&reported_zero_no_expected), "0.00T");
let both = MinerRow {
hashrate_ths: 60.0,
hashrate_known: true,
expected_ths: 200.0,
total_chips: Some(190),
expected_chips: Some(228),
@@ -2931,6 +2991,7 @@ mod tests {
let both = MinerRow {
hashrate_ths: 60.0,
hashrate_known: true,
expected_ths: 200.0,
total_chips: Some(190),
expected_chips: Some(228),
@@ -3004,8 +3065,16 @@ mod tests {
fn is_paused_detection() {
assert!(is_paused("Paused", false));
assert!(is_paused("PAUSED (manual)", false));
assert!(!is_paused("Paused", true), "mining overrides an even stale 'paused' state string");
// Intentional halts other firmwares report: VNish "Stopped" (miner_state
// "stopped"), Braiins "Suspended", a "Stopping" transition (round 19 #19 /
// 10.4.1.122 read as broken before this).
assert!(is_paused("Stopped", false), "an operator-stopped miner is paused, not broken");
assert!(is_paused("Stopping", false));
assert!(is_paused("Suspended", false));
assert!(!is_paused("Stopped", true), "mining overrides a stale 'stopped' state string");
assert!(!is_paused("Mining", false));
assert!(!is_paused("Error", false), "a failure is broken, not paused");
assert!(!is_paused("Idling", false), "plain idle is not an explicit halt");
assert!(!is_paused("", false));
}
+8 -2
View File
@@ -747,6 +747,9 @@ fn partial_row(miner: &dyn Miner, ip: std::net::IpAddr) -> MinerRow {
async fn to_row(miner: &dyn Miner) -> MinerRow {
let data = miner.get_data().await;
// Whether the firmware reported a current hashrate at all: a reported 0 renders
// "0.00T", an absent one the "-" dash (round 19 follow-up).
let hashrate_known = data.hashrate.is_some();
let hashrate_ths = data
.hashrate
.as_ref()
@@ -1111,6 +1114,7 @@ async fn to_row(miner: &dyn Miner) -> MinerRow {
cpu,
board_code,
hashrate_ths,
hashrate_known,
hashrate_1m_ths,
hashrate_5m_ths,
hashrate_15m_ths,
@@ -1151,8 +1155,9 @@ async fn to_row(miner: &dyn Miner) -> MinerRow {
fluid_temp_c,
env_temp_c,
outlet_temp_c,
temp_critical_c: data.temp_critical,
temp_shutdown_c: data.temp_shutdown,
temp_target_c: data.temp_target,
temp_hot_c: data.temp_hot,
temp_dangerous_c: data.temp_dangerous,
fan_rpms,
fan_speed_percent: data.fan_speed_percent,
psu_fan_rpm,
@@ -1200,6 +1205,7 @@ async fn to_row(miner: &dyn Miner) -> MinerRow {
uptime_secs: data.uptime.map(|d| d.as_secs()).unwrap_or(0),
light_flashing: data.light_flashing,
operating_state,
tuner_status: data.tuner_status.clone().unwrap_or_default(),
is_mining,
slow,
paused,
+30 -12
View File
@@ -438,28 +438,44 @@ fn encode_component_health(
max_fans: usize,
max_boards: usize,
) -> String {
use crate::model::CompHealth;
let mut segs: Vec<Segment> = Vec::new();
// On a paused/stopped miner, a component that is off *because* the miner is
// halted is expected, not a fault, so it reads blue (paused) instead of red.
// But this only applies where "not working" is a consequence of the pause:
// - Hashboards: idle (not hashing) is exactly what pausing does -> blue when
// paused (any detected board; an undetected one stays grey). Round 19 #19.
// - Fans: blue ONLY when actually stopped (0 RPM -> Down); a fan still
// spinning stays green/amber -- pausing doesn't necessarily stop the fans.
// - Control board + PSU: still running / powered, so they keep their true
// health (green when fine) even while paused -- never forced blue.
let paused = r.paused;
let board_col = |h: CompHealth| {
if paused && h != CompHealth::Unreachable {
pal.accent
} else {
health_color(pal, h)
}
};
let fan_col = |h: CompHealth| {
if paused && h == CompHealth::Down {
pal.accent
} else {
health_color(pal, h)
}
};
segs.push((Some(health_color(pal, r.power_health())), SHAPE_BOLT.to_string()));
segs.push((Some(health_color(pal, r.control_health())), SHAPE_BRAIN.to_string()));
let fans = r.fan_healths();
for h in &fans {
segs.push((Some(health_color(pal, *h)), SHAPE_FAN.to_string()));
segs.push((Some(fan_col(*h)), SHAPE_FAN.to_string()));
}
for _ in fans.len()..max_fans {
segs.push((None, SHAPE_GAP.to_string()));
}
let boards = r.board_healths();
for h in &boards {
// A paused miner's boards are intentionally idle, not faulty: show every
// detected board blue instead of its (red) health colour, while every
// other component keeps its normal colour. A genuinely undetected board
// stays grey (round 19 #19).
let color = if r.paused && *h != crate::model::CompHealth::Unreachable {
pal.accent
} else {
health_color(pal, *h)
};
segs.push((Some(color), SHAPE_CHIP.to_string()));
segs.push((Some(board_col(*h)), SHAPE_CHIP.to_string()));
}
for _ in boards.len()..max_boards {
segs.push((None, SHAPE_GAP.to_string()));
@@ -1269,7 +1285,9 @@ impl App {
// on the ACTUAL being known, so an unknown actual renders as
// "-/<expected>" in the default colour rather than a red 0%.
Column::Hashrate => {
let actual = format_hashrate_ths(r.hashrate_ths);
// A reported 0 shows "0.00T" (not a dash); the dash is only for
// an unreadable reading (hashrate_known == false).
let actual = format_hashrate_actual(r.hashrate_ths, r.hashrate_known);
let expected = format_hashrate_ths(r.expected_ths);
let ratio = (r.hashrate_ths > 0.0)
.then(|| actual_expected_ratio(r.hashrate_ths, r.expected_ths))
@@ -0,0 +1,378 @@
Subject: [PATCH 0029] telemetry: board temp thresholds -> target/hot/dangerous (LuxOS, Braiins; remap ePIC)
Round 19 #10, tier 3. Remodels the board temperature thresholds to the
target/hot/dangerous scheme from item #10 and adds the LuxOS and Braiins backends.
Supersedes the ePIC-only critical/shutdown model from patch 0028.
- MinerData: temp_critical/temp_shutdown -> temp_target/temp_hot/temp_dangerous.
parse_temperature_limits (on the existing GetFluidTemperature trait) now returns
(target, hot, dangerous).
- LuxOS: new tempctrl RPC command; ChipTarget/ChipHot/ChipDangerous
(live-verified 83/93/100, fixture tempctrl.json).
- Braiins v25_07 + v26_04: configuration/constraints cooling_constraints defaults
target/hot/dangerous (live-verified 60/80/90, fixture configuration_constraints.json;
WEB_CONSTRAINTS already fetched).
- ePIC remap: Shutdown Temp -> hot, Critical Temp -> dangerous, no target.
- Antminer/WhatsMiner expose no thresholds; VNish handled separately (settings auth).
Fixture tests for epic, luxminer, braiins v26_04 assert the parsed thresholds.
diff --git a/vendor/asic-rs-core/src/data/miner.rs b/vendor/asic-rs-core/src/data/miner.rs
index 08782856..9f74fc43 100644
--- a/vendor/asic-rs-core/src/data/miner.rs
+++ b/vendor/asic-rs-core/src/data/miner.rs
@@ -181,10 +181,12 @@ pub struct MinerData {
/// Miner-level fan duty cycle as a percentage (0-100), when reported. Firmware
/// exposes no maximum RPM, so this duty cycle is the normalized fan indicator.
pub fan_speed_percent: Option<f64>,
- /// Board critical temperature threshold in Celsius, when reported (round 19 #10).
- pub temp_critical: Option<f64>,
- /// Board shutdown temperature threshold in Celsius, when reported (round 19 #10).
- pub temp_shutdown: Option<f64>,
+ /// Board target temperature threshold in Celsius, when reported (round 19 #10).
+ pub temp_target: Option<f64>,
+ /// Board hot temperature threshold in Celsius, when reported (round 19 #10).
+ pub temp_hot: Option<f64>,
+ /// Board dangerous temperature threshold in Celsius, when reported (round 19 #10).
+ pub temp_dangerous: Option<f64>,
/// The current PDU fan information for the miner
pub psu_fans: Vec<FanData>,
/// The average temperature across all chips in the miner
diff --git a/vendor/asic-rs-core/src/traits/miner.rs b/vendor/asic-rs-core/src/traits/miner.rs
index 9de51761..25ea6168 100644
--- a/vendor/asic-rs-core/src/traits/miner.rs
+++ b/vendor/asic-rs-core/src/traits/miner.rs
@@ -282,7 +282,7 @@ impl<
let tuning_capabilities = self.parse_tuning_capabilities(&data);
let fluid_temperature = self.parse_fluid_temperature(&data);
let outlet_fluid_temperature = self.parse_outlet_fluid_temperature(&data);
- let (temp_critical, temp_shutdown) = self.parse_temperature_limits(&data);
+ let (temp_target, temp_hot, temp_dangerous) = self.parse_temperature_limits(&data);
let fans = self.parse_fans(&data);
let fan_speed_percent = self.parse_fan_speed_percent(&data);
let psu_fans = self.parse_psu_fans(&data);
@@ -369,8 +369,9 @@ impl<
expected_fans: device_info.hardware.fans,
fans,
fan_speed_percent,
- temp_critical,
- temp_shutdown,
+ temp_target,
+ temp_hot,
+ temp_dangerous,
psu_fans,
average_temperature,
fluid_temperature,
@@ -744,14 +745,14 @@ pub trait GetFluidTemperature: CollectData {
) -> Option<Temperature> {
None
}
- /// Board temperature safety thresholds as (critical, shutdown) in Celsius.
- /// Backends that expose them override this; others return (None, None).
+ /// Board temperature safety thresholds as (target, hot, dangerous) in Celsius.
+ /// Backends that expose them override this; others return (None, None, None).
#[allow(unused_variables)]
fn parse_temperature_limits(
&self,
data: &HashMap<DataField, Value>,
- ) -> (Option<f64>, Option<f64>) {
- (None, None)
+ ) -> (Option<f64>, Option<f64>, Option<f64>) {
+ (None, None, None)
}
}
diff --git a/vendor/asic-rs-firmwares-braiins/src/backends/v25_07/mod.rs b/vendor/asic-rs-firmwares-braiins/src/backends/v25_07/mod.rs
index 86e84d8c..0dec8d38 100644
--- a/vendor/asic-rs-firmwares-braiins/src/backends/v25_07/mod.rs
+++ b/vendor/asic-rs-firmwares-braiins/src/backends/v25_07/mod.rs
@@ -372,6 +372,16 @@ impl GetDataLocations for BraiinsV2507 {
tag: None,
},
)],
+ // Board temp thresholds (round 19 #10, T3): cooling_constraints defaults
+ // (target/hot/dangerous); WEB_CONSTRAINTS already fetched.
+ DataField::TemperatureLimits => vec![(
+ WEB_CONSTRAINTS,
+ DataExtractor {
+ func: get_by_pointer,
+ key: Some("/cooling_constraints"),
+ tag: None,
+ },
+ )],
_ => vec![],
}
}
@@ -725,7 +735,26 @@ impl GetScaledTuningTarget for BraiinsV2507 {
}
}
-impl GetFluidTemperature for BraiinsV2507 {}
+impl GetFluidTemperature for BraiinsV2507 {
+ fn parse_temperature_limits(
+ &self,
+ data: &HashMap<DataField, Value>,
+ ) -> (Option<f64>, Option<f64>, Option<f64>) {
+ // Braiins cooling_constraints target/hot/dangerous default thresholds in
+ // degree_c (round 19 #10, T3).
+ let d = data.get(&DataField::TemperatureLimits);
+ let f = |k: &str| {
+ d.and_then(|v| v.pointer(&format!("/{k}/default/degree_c")))
+ .and_then(|v| v.as_f64())
+ .filter(|v| v.is_finite() && *v > 0.0)
+ };
+ (
+ f("target_temperature"),
+ f("hot_temperature"),
+ f("dangerous_temperature"),
+ )
+ }
+}
impl GetTuningCapabilities for BraiinsV2507 {
fn parse_tuning_capabilities(
&self,
diff --git a/vendor/asic-rs-firmwares-braiins/src/backends/v26_04/mod.rs b/vendor/asic-rs-firmwares-braiins/src/backends/v26_04/mod.rs
index 303fca49..4e423e5b 100644
--- a/vendor/asic-rs-firmwares-braiins/src/backends/v26_04/mod.rs
+++ b/vendor/asic-rs-firmwares-braiins/src/backends/v26_04/mod.rs
@@ -393,6 +393,16 @@ impl GetDataLocations for BraiinsV2604 {
tag: None,
},
)],
+ // Board temp thresholds (round 19 #10, T3): cooling_constraints defaults
+ // (target/hot/dangerous); WEB_CONSTRAINTS already fetched.
+ DataField::TemperatureLimits => vec![(
+ WEB_CONSTRAINTS,
+ DataExtractor {
+ func: get_by_pointer,
+ key: Some("/cooling_constraints"),
+ tag: None,
+ },
+ )],
_ => vec![],
}
}
@@ -775,7 +785,26 @@ impl GetScaledTuningTarget for BraiinsV2604 {
}
}
-impl GetFluidTemperature for BraiinsV2604 {}
+impl GetFluidTemperature for BraiinsV2604 {
+ fn parse_temperature_limits(
+ &self,
+ data: &HashMap<DataField, Value>,
+ ) -> (Option<f64>, Option<f64>, Option<f64>) {
+ // Braiins cooling_constraints target/hot/dangerous default thresholds in
+ // degree_c (round 19 #10, T3).
+ let d = data.get(&DataField::TemperatureLimits);
+ let f = |k: &str| {
+ d.and_then(|v| v.pointer(&format!("/{k}/default/degree_c")))
+ .and_then(|v| v.as_f64())
+ .filter(|v| v.is_finite() && *v > 0.0)
+ };
+ (
+ f("target_temperature"),
+ f("hot_temperature"),
+ f("dangerous_temperature"),
+ )
+ }
+}
impl GetTuningCapabilities for BraiinsV2604 {
fn parse_tuning_capabilities(
&self,
@@ -1167,10 +1196,10 @@ mod tests {
use super::*;
use crate::test::json::v26_04::{
- WEB_COOLING_STATE_COMMAND, WEB_HASHBOARDS_COMMAND, WEB_LOCATE_COMMAND,
- WEB_MINER_CONFIGURATION_COMMAND, WEB_MINER_DETAILS_COMMAND, WEB_MINER_STATS_COMMAND,
- WEB_NETWORK_COMMAND, WEB_PERFORMANCE_TUNER_STATE_COMMAND, WEB_POOLS_COMMAND,
- WEB_VERSION_COMMAND,
+ WEB_CONSTRAINTS_COMMAND, WEB_COOLING_STATE_COMMAND, WEB_HASHBOARDS_COMMAND,
+ WEB_LOCATE_COMMAND, WEB_MINER_CONFIGURATION_COMMAND, WEB_MINER_DETAILS_COMMAND,
+ WEB_MINER_STATS_COMMAND, WEB_NETWORK_COMMAND, WEB_PERFORMANCE_TUNER_STATE_COMMAND,
+ WEB_POOLS_COMMAND, WEB_VERSION_COMMAND,
};
#[tokio::test]
@@ -1251,6 +1280,13 @@ mod tests {
},
Value::from_str(WEB_HASHBOARDS_COMMAND).unwrap(),
);
+ results.insert(
+ MinerCommand::WebAPI {
+ command: "configuration/constraints",
+ parameters: None,
+ },
+ Value::from_str(WEB_CONSTRAINTS_COMMAND).unwrap(),
+ );
results.insert(
MinerCommand::WebAPI {
command: "actions/locate",
@@ -1313,6 +1349,10 @@ mod tests {
// 19 #10, T3).
let fan_pct = miner_data.fan_speed_percent.expect("braiins fan duty");
assert!((fan_pct - 92.0).abs() < 1e-6);
+ // Board temp thresholds from cooling_constraints defaults (round 19 #10, T3).
+ assert_eq!(miner_data.temp_target, Some(60.0));
+ assert_eq!(miner_data.temp_hot, Some(80.0));
+ assert_eq!(miner_data.temp_dangerous, Some(90.0));
}
#[test]
diff --git a/vendor/asic-rs-firmwares-braiins/src/test/json/v26_04/mod.rs b/vendor/asic-rs-firmwares-braiins/src/test/json/v26_04/mod.rs
index 06b35fef..3904b012 100644
--- a/vendor/asic-rs-firmwares-braiins/src/test/json/v26_04/mod.rs
+++ b/vendor/asic-rs-firmwares-braiins/src/test/json/v26_04/mod.rs
@@ -12,3 +12,4 @@ pub(crate) const WEB_POOLS_COMMAND: &str = include_str!("pools.json");
pub(crate) const WEB_COOLING_STATE_COMMAND: &str = include_str!("cooling_state.json");
pub(crate) const WEB_HASHBOARDS_COMMAND: &str = include_str!("miner_hw_hashboards.json");
pub(crate) const WEB_LOCATE_COMMAND: &str = include_str!("actions_locate.json");
+pub(crate) const WEB_CONSTRAINTS_COMMAND: &str = include_str!("configuration_constraints.json");
diff --git a/vendor/asic-rs-firmwares-epic/src/backends/v1/mod.rs b/vendor/asic-rs-firmwares-epic/src/backends/v1/mod.rs
index 0c9a851b..2e12e07a 100644
--- a/vendor/asic-rs-firmwares-epic/src/backends/v1/mod.rs
+++ b/vendor/asic-rs-firmwares-epic/src/backends/v1/mod.rs
@@ -1153,15 +1153,16 @@ impl GetFluidTemperature for PowerPlayV1 {
fn parse_temperature_limits(
&self,
data: &HashMap<DataField, Value>,
- ) -> (Option<f64>, Option<f64>) {
- // ePIC summary /Misc: Critical Temp + Shutdown Temp (round 19 #10, T3).
+ ) -> (Option<f64>, Option<f64>, Option<f64>) {
+ // ePIC summary /Misc: Shutdown Temp (hot) + Critical Temp (dangerous); no
+ // target threshold reported (round 19 #10, T3).
let d = data.get(&DataField::TemperatureLimits);
let f = |k: &str| {
d.and_then(|v| v.pointer(k))
.and_then(|v| v.as_f64())
.filter(|v| v.is_finite() && *v > 0.0)
};
- (f("/Critical Temp"), f("/Shutdown Temp"))
+ (None, f("/Shutdown Temp"), f("/Critical Temp"))
}
}
@@ -2229,9 +2230,11 @@ mod tests {
assert_eq!(miner_data.wattage, Some(Power::from_watts(2166.6174)));
// Miner-level fan duty cycle from summary /Fans/Fans Speed (round 19 #10, T3).
assert_eq!(miner_data.fan_speed_percent, Some(100.0));
- // Board temp thresholds from summary /Misc (round 19 #10, T3).
- assert_eq!(miner_data.temp_critical, Some(100.0));
- assert_eq!(miner_data.temp_shutdown, Some(85.0));
+ // Board temp thresholds from summary /Misc (round 19 #10, T3): Shutdown->hot,
+ // Critical->dangerous, no target.
+ assert_eq!(miner_data.temp_target, None);
+ assert_eq!(miner_data.temp_hot, Some(85.0));
+ assert_eq!(miner_data.temp_dangerous, Some(100.0));
assert_eq!(miner_data.hashboards.len(), 3);
assert_eq!(miner_data.hashboards[0].active, Some(false));
assert_eq!(miner_data.hashboards[1].chips.len(), 110);
diff --git a/vendor/asic-rs-firmwares-luxminer/src/backends/v1/mod.rs b/vendor/asic-rs-firmwares-luxminer/src/backends/v1/mod.rs
index edab7c4c..de9c2d35 100644
--- a/vendor/asic-rs-firmwares-luxminer/src/backends/v1/mod.rs
+++ b/vendor/asic-rs-firmwares-luxminer/src/backends/v1/mod.rs
@@ -278,6 +278,11 @@ impl GetDataLocations for LuxMinerV1 {
parameters: None,
};
+ const RPC_TEMPCTRL: MinerCommand = MinerCommand::RPC {
+ command: "tempctrl",
+ parameters: None,
+ };
+
match data_field {
DataField::Mac => vec![(
RPC_CONFIG,
@@ -305,6 +310,16 @@ impl GetDataLocations for LuxMinerV1 {
tag: None,
},
)],
+ // Board temp thresholds (round 19 #10, T3): LuxOS tempctrl reports
+ // ChipTarget / ChipHot / ChipDangerous.
+ DataField::TemperatureLimits => vec![(
+ RPC_TEMPCTRL,
+ DataExtractor {
+ func: get_by_pointer,
+ key: Some("/TEMPCTRL/0"),
+ tag: None,
+ },
+ )],
DataField::ApiVersion => vec![(
RPC_VERSION,
DataExtractor {
@@ -690,6 +705,20 @@ impl GetFluidTemperature for LuxMinerV1 {
(None, None) => None,
}
}
+ fn parse_temperature_limits(
+ &self,
+ data: &HashMap<DataField, Value>,
+ ) -> (Option<f64>, Option<f64>, Option<f64>) {
+ // LuxOS tempctrl chip thresholds ChipTarget / ChipHot / ChipDangerous
+ // (round 19 #10, T3).
+ let d = data.get(&DataField::TemperatureLimits);
+ let f = |k: &str| {
+ d.and_then(|v| v.get(k))
+ .and_then(|v| v.as_f64())
+ .filter(|v| v.is_finite() && *v > 0.0)
+ };
+ (f("ChipTarget"), f("ChipHot"), f("ChipDangerous"))
+ }
}
impl GetFirmwareVersion for LuxMinerV1 {
@@ -1465,7 +1494,8 @@ mod tests {
use super::*;
use crate::test::json::v1::{
CONFIG, DEVS, EVENTS, FANS, HEALTHCHIPGET_0, HEALTHCHIPGET_1, HEALTHCHIPGET_2, POOLS,
- POWER, PROFILES, STATS, SUMMARY, TEMPS, VERSION, VOLTAGEGET_0, VOLTAGEGET_1, VOLTAGEGET_2,
+ POWER, PROFILES, STATS, SUMMARY, TEMPCTRL, TEMPS, VERSION, VOLTAGEGET_0, VOLTAGEGET_1,
+ VOLTAGEGET_2,
};
#[test]
@@ -1582,6 +1612,11 @@ mod tests {
parameters: None,
};
+ let tempctrl_cmd = MinerCommand::RPC {
+ command: "tempctrl",
+ parameters: None,
+ };
+
results.insert(version_cmd, Value::from_str(VERSION)?);
results.insert(stats_cmd, Value::from_str(STATS)?);
results.insert(summary_cmd, Value::from_str(SUMMARY)?);
@@ -1591,6 +1626,7 @@ mod tests {
results.insert(power_cmd, Value::from_str(POWER)?);
results.insert(profiles_cmd, Value::from_str(PROFILES)?);
results.insert(temps_cmd, Value::from_str(TEMPS)?);
+ results.insert(tempctrl_cmd, Value::from_str(TEMPCTRL)?);
results.insert(devs_cmd, Value::from_str(DEVS)?);
results.insert(
MinerCommand::RPC {
@@ -1704,6 +1740,11 @@ mod tests {
// Miner-level fan duty cycle = max of per-fan Speed (all 20 here); round 19
// #10, T3.
assert_eq!(miner_data.fan_speed_percent, Some(20.0));
+ // Board temp thresholds from tempctrl ChipTarget/ChipHot/ChipDangerous
+ // (round 19 #10, T3).
+ assert_eq!(miner_data.temp_target, Some(83.0));
+ assert_eq!(miner_data.temp_hot, Some(93.0));
+ assert_eq!(miner_data.temp_dangerous, Some(100.0));
assert_eq!(miner_data.hashboards[0].chips.len(), 77);
assert_eq!(miner_data.pools.len(), 2);
assert_eq!(miner_data.pools[0].len(), 2);
diff --git a/vendor/asic-rs-firmwares-luxminer/src/test/json/v1/mod.rs b/vendor/asic-rs-firmwares-luxminer/src/test/json/v1/mod.rs
index 7f328a47..02500ccb 100644
--- a/vendor/asic-rs-firmwares-luxminer/src/test/json/v1/mod.rs
+++ b/vendor/asic-rs-firmwares-luxminer/src/test/json/v1/mod.rs
@@ -10,6 +10,7 @@ pub(crate) const PROFILES: &str = include_str!("profiles.json");
pub(crate) const STATS: &str = include_str!("stats.json");
pub(crate) const SUMMARY: &str = include_str!("summary.json");
pub(crate) const TEMPS: &str = include_str!("temps.json");
+pub(crate) const TEMPCTRL: &str = include_str!("tempctrl.json");
pub(crate) const VERSION: &str = include_str!("version.json");
pub(crate) const EVENTS: &str = include_str!("events.json");
@@ -0,0 +1,364 @@
Subject: [PATCH 0030] telemetry: VNish fan% + temp thresholds; WhatsMiner chip type
Round 19 #10, tier 3 live-verified follow-up. Populates existing columns for more
firmwares; no core or GUI change.
- VNish (v1_2_0 + v1_3_0): fan duty % from summary /miner/cooling/fan_duty; board
temp thresholds from settings (restart_temp -> dangerous, auto cooling mode param
-> target; no hot). Both commands already fetched. Live-verified on 10.4.1.50
(fan_duty 81, restart_temp 90, auto param 65). VNish exposes no PSU serial
(factory-info absent) so it stays None.
- WhatsMiner chip type (per noah, do not drop): v1/v2 summary "Chip Data" merged
into the hashboards data -> BoardData.chip_type (first token, e.g. "HP5A01-19101436");
v3 get.device.info chipdataN -> chip_type and hash-board ("K40") -> hashboard_model.
Live WhatsMiner summaries often omit "Chip Data" (populates where present); v3
chip data is live on newer units.
Fixture tests: whatsminer v1/v3 assert chip_type/hashboard_model; vnish asserts the
parsed fan % and temp thresholds.
diff --git a/vendor/asic-rs-firmwares-vnish/src/backends/v1_2_0/mod.rs b/vendor/asic-rs-firmwares-vnish/src/backends/v1_2_0/mod.rs
index e734a03e..ad2779b6 100644
--- a/vendor/asic-rs-firmwares-vnish/src/backends/v1_2_0/mod.rs
+++ b/vendor/asic-rs-firmwares-vnish/src/backends/v1_2_0/mod.rs
@@ -369,6 +369,25 @@ impl GetDataLocations for VnishV120 {
tag: None,
},
)],
+ // Miner-level fan duty cycle (round 19 #10, T3); summary already fetched.
+ DataField::FanSpeedPercent => vec![(
+ WEB_SUMMARY,
+ DataExtractor {
+ func: get_by_pointer,
+ key: Some("/miner/cooling/fan_duty"),
+ tag: None,
+ },
+ )],
+ // Board temp thresholds (round 19 #10, T3): settings restart_temp
+ // (dangerous) + auto cooling target. Settings already fetched.
+ DataField::TemperatureLimits => vec![(
+ WEB_SETTINGS,
+ DataExtractor {
+ func: get_by_pointer,
+ key: Some("/miner"),
+ tag: None,
+ },
+ )],
_ => vec![],
}
}
@@ -678,6 +697,12 @@ impl GetFans for VnishV120 {
fans
}
+ fn parse_fan_speed_percent(&self, data: &HashMap<DataField, Value>) -> Option<f64> {
+ // VNish summary /miner/cooling/fan_duty is a miner-level duty % (round 19 #10).
+ data.get(&DataField::FanSpeedPercent)
+ .and_then(|v| v.as_f64())
+ .filter(|v| v.is_finite() && *v >= 0.0)
+ }
}
impl GetPsuFans for VnishV120 {}
@@ -766,6 +791,26 @@ impl GetFluidTemperature for VnishV120 {
.max()
.map(|t| Temperature::from_celsius(t as f64))
}
+ fn parse_temperature_limits(
+ &self,
+ data: &HashMap<DataField, Value>,
+ ) -> (Option<f64>, Option<f64>, Option<f64>) {
+ // VNish settings: restart_temp is the dangerous threshold; the auto cooling
+ // mode "param" is the target temperature. No hot threshold (round 19 #10, T3).
+ let m = data.get(&DataField::TemperatureLimits);
+ let dangerous = m
+ .and_then(|v| v.pointer("/misc/restart_temp"))
+ .and_then(|v| v.as_f64())
+ .filter(|v| v.is_finite() && *v > 0.0);
+ let target = m
+ .filter(|v| {
+ v.pointer("/cooling/settings/mode/name").and_then(|n| n.as_str()) == Some("auto")
+ })
+ .and_then(|v| v.pointer("/cooling/settings/mode/param"))
+ .and_then(|v| v.as_f64())
+ .filter(|v| v.is_finite() && *v > 0.0);
+ (target, None, dangerous)
+ }
}
impl GetWattage for VnishV120 {
diff --git a/vendor/asic-rs-firmwares-vnish/src/backends/v1_3_0/mod.rs b/vendor/asic-rs-firmwares-vnish/src/backends/v1_3_0/mod.rs
index 0a5d694e..4f0453a1 100644
--- a/vendor/asic-rs-firmwares-vnish/src/backends/v1_3_0/mod.rs
+++ b/vendor/asic-rs-firmwares-vnish/src/backends/v1_3_0/mod.rs
@@ -375,6 +375,26 @@ impl GetDataLocations for VnishV130 {
tag: None,
},
)],
+ // Miner-level fan duty cycle (round 19 #10, T3); summary already fetched.
+ DataField::FanSpeedPercent => vec![(
+ WEB_SUMMARY,
+ DataExtractor {
+ func: get_by_pointer,
+ key: Some("/miner/cooling/fan_duty"),
+ tag: None,
+ },
+ )],
+ // Board temp thresholds (round 19 #10, T3): settings /miner/misc/restart_temp
+ // (dangerous) + auto cooling target (/miner/cooling/settings/mode/param).
+ // Settings already fetched for the tuning preset.
+ DataField::TemperatureLimits => vec![(
+ WEB_SETTINGS,
+ DataExtractor {
+ func: get_by_pointer,
+ key: Some("/miner"),
+ tag: None,
+ },
+ )],
_ => vec![],
}
}
@@ -683,6 +703,12 @@ impl GetFans for VnishV130 {
fans
}
+ fn parse_fan_speed_percent(&self, data: &HashMap<DataField, Value>) -> Option<f64> {
+ // VNish summary /miner/cooling/fan_duty is a miner-level duty % (round 19 #10).
+ data.get(&DataField::FanSpeedPercent)
+ .and_then(|v| v.as_f64())
+ .filter(|v| v.is_finite() && *v >= 0.0)
+ }
}
impl GetPsuFans for VnishV130 {}
@@ -716,6 +742,26 @@ impl GetFluidTemperature for VnishV130 {
.max()
.map(|t| Temperature::from_celsius(t as f64))
}
+ fn parse_temperature_limits(
+ &self,
+ data: &HashMap<DataField, Value>,
+ ) -> (Option<f64>, Option<f64>, Option<f64>) {
+ // VNish settings: restart_temp is the dangerous threshold; the auto cooling
+ // mode "param" is the target temperature. No hot threshold (round 19 #10, T3).
+ let m = data.get(&DataField::TemperatureLimits);
+ let dangerous = m
+ .and_then(|v| v.pointer("/misc/restart_temp"))
+ .and_then(|v| v.as_f64())
+ .filter(|v| v.is_finite() && *v > 0.0);
+ let target = m
+ .filter(|v| {
+ v.pointer("/cooling/settings/mode/name").and_then(|n| n.as_str()) == Some("auto")
+ })
+ .and_then(|v| v.pointer("/cooling/settings/mode/param"))
+ .and_then(|v| v.as_f64())
+ .filter(|v| v.is_finite() && *v > 0.0);
+ (target, None, dangerous)
+ }
}
impl GetWattage for VnishV130 {
@@ -1354,6 +1400,28 @@ mod tests {
);
}
+ /// Fan duty cycle (summary /miner/cooling/fan_duty) and board temp thresholds
+ /// (settings restart_temp -> dangerous, auto cooling param -> target); round 19
+ /// #10, T3. Values match the live 10.4.1.50 fleet unit.
+ #[test]
+ fn fan_duty_and_temp_thresholds() {
+ let miner = VnishV130::new(IpAddr::from([127, 0, 0, 1]), AntMinerModel::S19jPro);
+ let mut data: HashMap<DataField, Value> = HashMap::new();
+ data.insert(DataField::FanSpeedPercent, json!(81));
+ data.insert(
+ DataField::TemperatureLimits,
+ json!({
+ "misc": { "restart_temp": 90 },
+ "cooling": { "settings": { "mode": { "name": "auto", "param": 65 } } }
+ }),
+ );
+ assert_eq!(miner.parse_fan_speed_percent(&data), Some(81.0));
+ assert_eq!(
+ miner.parse_temperature_limits(&data),
+ (Some(65.0), None, Some(90.0))
+ );
+ }
+
/// An L9 is a Scrypt miner and VNish says so in `/info`, both in
/// `algorithm` and by reporting `hr_measure: MH/s`. Before this was wired
/// up it came back as a SHA-256 miner and every figure was read as GH/s,
diff --git a/vendor/asic-rs-firmwares-whatsminer/src/backends/v1/mod.rs b/vendor/asic-rs-firmwares-whatsminer/src/backends/v1/mod.rs
index aacd1077..4025a931 100644
--- a/vendor/asic-rs-firmwares-whatsminer/src/backends/v1/mod.rs
+++ b/vendor/asic-rs-firmwares-whatsminer/src/backends/v1/mod.rs
@@ -205,14 +205,26 @@ impl GetDataLocations for WhatsMinerV1 {
tag: None,
},
)],
- DataField::Hashboards => vec![(
- RPC_DEVS,
- DataExtractor {
- func: get_by_pointer,
- key: Some(""),
- tag: None,
- },
- )],
+ DataField::Hashboards => vec![
+ (
+ RPC_DEVS,
+ DataExtractor {
+ func: get_by_pointer,
+ key: Some(""),
+ tag: None,
+ },
+ ),
+ // Merge in summary so "Chip Data" (miner-wide chip marking) is
+ // available per board (round 19 #10); RPC_SUMMARY already fetched.
+ (
+ RPC_SUMMARY,
+ DataExtractor {
+ func: get_by_pointer,
+ key: Some("/SUMMARY/0"),
+ tag: None,
+ },
+ ),
+ ],
DataField::Pools => vec![(
RPC_POOLS,
DataExtractor {
@@ -436,6 +448,20 @@ impl GetHashboards for WhatsMinerV1 {
);
}
+ // Chip marking from the merged summary "Chip Data" (miner-wide, first
+ // token), applied to every board (round 19 #10).
+ let chip_type = hashboard_data
+ .pointer("/Chip Data")
+ .and_then(|v| v.as_str())
+ .and_then(|s| s.split_whitespace().next())
+ .filter(|s| !s.is_empty())
+ .map(str::to_string);
+ if chip_type.is_some() {
+ for board in hashboards.iter_mut() {
+ board.chip_type = chip_type.clone();
+ }
+ }
+
hashboards
}
}
@@ -992,6 +1018,12 @@ mod integration_tests {
assert_eq!(shares.difficulty_rejected, Some(0.0));
assert_eq!(shares.stale_shares, Some(0));
assert_eq!(shares.found_blocks, Some(0));
+ // Chip marking from summary "Chip Data" first token (round 19 #10).
+ assert!(!miner_data.hashboards.is_empty());
+ assert_eq!(
+ miner_data.hashboards[0].chip_type.as_deref(),
+ Some("HP5A01-19101436")
+ );
assert_eq!(miner_data.wattage, Some(Power::from_watts(3417f64)));
assert_eq!(
miner_data.tuning_target,
diff --git a/vendor/asic-rs-firmwares-whatsminer/src/backends/v2/mod.rs b/vendor/asic-rs-firmwares-whatsminer/src/backends/v2/mod.rs
index 4cfcee19..2b340e28 100644
--- a/vendor/asic-rs-firmwares-whatsminer/src/backends/v2/mod.rs
+++ b/vendor/asic-rs-firmwares-whatsminer/src/backends/v2/mod.rs
@@ -216,14 +216,26 @@ impl GetDataLocations for WhatsMinerV2 {
tag: None,
},
)],
- DataField::Hashboards => vec![(
- RPC_DEVS,
- DataExtractor {
- func: get_by_pointer,
- key: Some(""),
- tag: None,
- },
- )],
+ DataField::Hashboards => vec![
+ (
+ RPC_DEVS,
+ DataExtractor {
+ func: get_by_pointer,
+ key: Some(""),
+ tag: None,
+ },
+ ),
+ // Merge in summary so "Chip Data" (miner-wide chip marking) is
+ // available per board (round 19 #10); RPC_SUMMARY already fetched.
+ (
+ RPC_SUMMARY,
+ DataExtractor {
+ func: get_by_pointer,
+ key: Some("/SUMMARY/0"),
+ tag: None,
+ },
+ ),
+ ],
DataField::Pools => vec![(
RPC_POOLS,
DataExtractor {
@@ -433,6 +445,20 @@ impl GetHashboards for WhatsMinerV2 {
);
}
+ // Chip marking from the merged summary "Chip Data" (miner-wide, first
+ // token), applied to every board (round 19 #10).
+ let chip_type = hashboard_data
+ .pointer("/Chip Data")
+ .and_then(|v| v.as_str())
+ .and_then(|s| s.split_whitespace().next())
+ .filter(|s| !s.is_empty())
+ .map(str::to_string);
+ if chip_type.is_some() {
+ for board in hashboards.iter_mut() {
+ board.chip_type = chip_type.clone();
+ }
+ }
+
hashboards
}
}
diff --git a/vendor/asic-rs-firmwares-whatsminer/src/backends/v3/mod.rs b/vendor/asic-rs-firmwares-whatsminer/src/backends/v3/mod.rs
index 04608936..77a1c6ec 100644
--- a/vendor/asic-rs-firmwares-whatsminer/src/backends/v3/mod.rs
+++ b/vendor/asic-rs-firmwares-whatsminer/src/backends/v3/mod.rs
@@ -459,6 +459,19 @@ impl GetHashboards for WhatsMinerV3 {
.map(|h| h.value > 0.0)
.unwrap_or(false),
);
+ // Chip marking (per-board chipdataN, first token) + hashboard model
+ // (miner-wide hash-board, e.g. "K40") from get.device.info (round 19 #10).
+ board.chip_type = hashboard_data
+ .pointer(&format!("/chipdata{idx}"))
+ .and_then(|v| v.as_str())
+ .and_then(|s| s.split_whitespace().next())
+ .filter(|s| !s.is_empty())
+ .map(str::to_string);
+ board.hashboard_model = hashboard_data
+ .pointer("/hash-board")
+ .and_then(|v| v.as_str())
+ .filter(|s| !s.is_empty())
+ .map(str::to_string);
}
hashboards
@@ -1241,6 +1254,17 @@ mod integration_tests {
assert!(miner_data.is_mining);
assert_eq!(miner_data.fans.len(), 2);
assert_eq!(miner_data.pools[0].len(), 3);
+ // Chip marking (chipdataN first token) + hashboard model (hash-board);
+ // round 19 #10.
+ assert!(!miner_data.hashboards.is_empty());
+ assert_eq!(
+ miner_data.hashboards[0].chip_type.as_deref(),
+ Some("K8EC374-2426")
+ );
+ assert_eq!(
+ miner_data.hashboards[0].hashboard_model.as_deref(),
+ Some("K40")
+ );
Ok(())
}
@@ -0,0 +1,237 @@
Subject: [PATCH 0031] telemetry: auto-tuner status (Braiins, ePIC)
Round 19 #10, tier 3. Exposes the auto-tuner status as a human-readable label.
- New DataField::TunerStatus; MinerData gains tuner_status (Option<String>).
Rides the existing GetOperatingState trait via a defaulted parse_tuner_status
method (no supertrait bound); parse_data wires it in.
- Braiins v25_07 + v26_04: performance/tuner-state overall_tuner_state, mapped
through the BOS+ TunerState enum (bos-plus-api performance.proto: 1 Disabled,
2 Stable, 3 Tuning, 4 Error, 5 Continuous, 6 Preheat). Command already fetched.
- ePIC: summary PerpetualTune -> "Off" (not running), "Optimized" (settled) or
"Tuning" (running, not yet optimized). Summary already fetched.
- WhatsMiner/Antminer/LuxOS/VNish report no distinct tuner status -> None.
Fixture tests: braiins v26_04 asserts "Continuous" (state 5), epic asserts "Tuning".
diff --git a/vendor/asic-rs-core/src/data/collector.rs b/vendor/asic-rs-core/src/data/collector.rs
index 1e6e7e9d..8f9b4c9c 100644
--- a/vendor/asic-rs-core/src/data/collector.rs
+++ b/vendor/asic-rs-core/src/data/collector.rs
@@ -68,6 +68,9 @@ pub enum DataField {
/// Board temperature safety thresholds (critical / shutdown), in Celsius.
#[cfg_attr(feature = "python", pydantic(value = "TemperatureLimits"))]
TemperatureLimits,
+ /// Auto-tuner status (a human-readable label, e.g. "Stable", "Tuning").
+ #[cfg_attr(feature = "python", pydantic(value = "TunerStatus"))]
+ TunerStatus,
/// PSU fan speed or configuration.
#[cfg_attr(feature = "python", pydantic(value = "PsuFans"))]
PsuFans,
diff --git a/vendor/asic-rs-core/src/data/miner.rs b/vendor/asic-rs-core/src/data/miner.rs
index 9f74fc43..8832a049 100644
--- a/vendor/asic-rs-core/src/data/miner.rs
+++ b/vendor/asic-rs-core/src/data/miner.rs
@@ -236,6 +236,9 @@ pub struct MinerData {
#[serde(default)]
#[cfg_attr(feature = "python", pydantic(default = None))]
pub operating_state: Option<OperatingState>,
+ /// Auto-tuner status as a human-readable label (round 19 #10), when reported:
+ /// e.g. "Stable"/"Tuning" (Braiins), "Optimized"/"Tuning"/"Off" (ePIC).
+ pub tuner_status: Option<String>,
/// The current pools configured on the miner
pub pools: Vec<PoolGroupData>,
/// Difficulty of the best share found over the miner's lifetime, when reported.
diff --git a/vendor/asic-rs-core/src/traits/miner.rs b/vendor/asic-rs-core/src/traits/miner.rs
index 25ea6168..397b2e8c 100644
--- a/vendor/asic-rs-core/src/traits/miner.rs
+++ b/vendor/asic-rs-core/src/traits/miner.rs
@@ -290,6 +290,7 @@ impl<
let light_flashing = self.parse_light_flashing(&data);
let is_mining = self.parse_is_mining(&data);
let operating_state = self.parse_operating_state(&data);
+ let tuner_status = self.parse_tuner_status(&data);
let messages = self.parse_messages(&data);
let pools = self.parse_pools(&data);
let best_share = self.parse_best_share(&data);
@@ -392,6 +393,7 @@ impl<
uptime,
is_mining,
operating_state,
+ tuner_status,
pools,
best_share,
@@ -914,6 +916,18 @@ pub trait GetOperatingState: CollectData {
fn parse_operating_state(&self, data: &HashMap<DataField, Value>) -> Option<OperatingState> {
None
}
+ #[tracing::instrument(level = "debug")]
+ async fn get_tuner_status(&self) -> Option<String> {
+ let mut collector = self.get_collector();
+ let data = collector.collect(&[DataField::TunerStatus]).await;
+ self.parse_tuner_status(&data)
+ }
+ /// Auto-tuner status as a human-readable label. Backends that expose it override
+ /// this; others return None.
+ #[allow(unused_variables)]
+ fn parse_tuner_status(&self, data: &HashMap<DataField, Value>) -> Option<String> {
+ None
+ }
}
// Pools
diff --git a/vendor/asic-rs-firmwares-braiins/src/backends/v25_07/mod.rs b/vendor/asic-rs-firmwares-braiins/src/backends/v25_07/mod.rs
index 0dec8d38..f5937521 100644
--- a/vendor/asic-rs-firmwares-braiins/src/backends/v25_07/mod.rs
+++ b/vendor/asic-rs-firmwares-braiins/src/backends/v25_07/mod.rs
@@ -272,6 +272,16 @@ impl GetDataLocations for BraiinsV2507 {
tag: None,
},
)],
+ // Auto-tuner status (round 19 #10, T3): performance/tuner-state
+ // overall_tuner_state enum; command already fetched.
+ DataField::TunerStatus => vec![(
+ WEB_PERFORMANCE_TUNER_STATE,
+ DataExtractor {
+ func: get_by_pointer,
+ key: Some("/overall_tuner_state"),
+ tag: None,
+ },
+ )],
DataField::Uptime => vec![(
WEB_MINER_DETAILS,
DataExtractor {
@@ -630,6 +640,21 @@ impl GetOperatingState for BraiinsV2507 {
},
})
}
+ fn parse_tuner_status(&self, data: &HashMap<DataField, Value>) -> Option<String> {
+ // BOS+ TunerState enum (bos-plus-api performance.proto): 1 Disabled,
+ // 2 Stable, 3 Tuning, 4 Error, 5 Continuous, 6 Preheat (round 19 #10, T3).
+ Some(match data.get(&DataField::TunerStatus)?.as_u64()? {
+ 0 => return None,
+ 1 => "Disabled",
+ 2 => "Stable",
+ 3 => "Tuning",
+ 4 => "Error",
+ 5 => "Continuous",
+ 6 => "Preheat",
+ _ => return None,
+ })
+ .map(str::to_string)
+ }
}
impl GetIsMining for BraiinsV2507 {
diff --git a/vendor/asic-rs-firmwares-braiins/src/backends/v26_04/mod.rs b/vendor/asic-rs-firmwares-braiins/src/backends/v26_04/mod.rs
index 4e423e5b..07afc871 100644
--- a/vendor/asic-rs-firmwares-braiins/src/backends/v26_04/mod.rs
+++ b/vendor/asic-rs-firmwares-braiins/src/backends/v26_04/mod.rs
@@ -275,6 +275,16 @@ impl GetDataLocations for BraiinsV2604 {
tag: None,
},
)],
+ // Auto-tuner status (round 19 #10, T3): performance/tuner-state
+ // overall_tuner_state enum; command already fetched.
+ DataField::TunerStatus => vec![(
+ WEB_PERFORMANCE_TUNER_STATE,
+ DataExtractor {
+ func: get_by_pointer,
+ key: Some("/overall_tuner_state"),
+ tag: None,
+ },
+ )],
DataField::Uptime => vec![(
WEB_MINER_DETAILS,
DataExtractor {
@@ -667,6 +677,21 @@ impl GetOperatingState for BraiinsV2604 {
},
})
}
+ fn parse_tuner_status(&self, data: &HashMap<DataField, Value>) -> Option<String> {
+ // BOS+ TunerState enum (bos-plus-api performance.proto): 1 Disabled,
+ // 2 Stable, 3 Tuning, 4 Error, 5 Continuous, 6 Preheat (round 19 #10, T3).
+ Some(match data.get(&DataField::TunerStatus)?.as_u64()? {
+ 0 => return None,
+ 1 => "Disabled",
+ 2 => "Stable",
+ 3 => "Tuning",
+ 4 => "Error",
+ 5 => "Continuous",
+ 6 => "Preheat",
+ _ => return None,
+ })
+ .map(str::to_string)
+ }
}
impl GetIsMining for BraiinsV2604 {
@@ -1353,6 +1378,8 @@ mod tests {
assert_eq!(miner_data.temp_target, Some(60.0));
assert_eq!(miner_data.temp_hot, Some(80.0));
assert_eq!(miner_data.temp_dangerous, Some(90.0));
+ // Auto-tuner status: overall_tuner_state 5 -> Continuous (round 19 #10, T3).
+ assert_eq!(miner_data.tuner_status.as_deref(), Some("Continuous"));
}
#[test]
diff --git a/vendor/asic-rs-firmwares-epic/src/backends/v1/mod.rs b/vendor/asic-rs-firmwares-epic/src/backends/v1/mod.rs
index 2e12e07a..e0df43e3 100644
--- a/vendor/asic-rs-firmwares-epic/src/backends/v1/mod.rs
+++ b/vendor/asic-rs-firmwares-epic/src/backends/v1/mod.rs
@@ -594,6 +594,16 @@ impl GetDataLocations for PowerPlayV1 {
tag: None,
},
)],
+ // Auto-tuner status (round 19 #10, T3): PowerPlay PerpetualTune; summary
+ // already fetched.
+ DataField::TunerStatus => vec![(
+ WEB_SUMMARY,
+ DataExtractor {
+ func: get_by_pointer,
+ key: Some("/PerpetualTune"),
+ tag: None,
+ },
+ )],
DataField::LightFlashing => vec![(
WEB_SUMMARY,
DataExtractor {
@@ -1408,6 +1418,28 @@ impl GetOperatingState for PowerPlayV1 {
.and_then(Value::as_str)
.and_then(OperatingState::from_label)
}
+ fn parse_tuner_status(&self, data: &HashMap<DataField, Value>) -> Option<String> {
+ // ePIC PerpetualTune: Running gates it; the per-algorithm Optimized flag
+ // distinguishes a settled tune from an in-progress one (round 19 #10, T3).
+ let pt = data.get(&DataField::TunerStatus)?;
+ if !pt.pointer("/Running").and_then(|v| v.as_bool()).unwrap_or(false) {
+ return Some("Off".to_string());
+ }
+ let optimized = pt
+ .pointer("/Algorithm")
+ .and_then(|v| v.as_object())
+ .and_then(|algos| {
+ algos
+ .values()
+ .filter_map(|a| a.pointer("/Optimized").and_then(|v| v.as_bool()))
+ .next()
+ });
+ Some(match optimized {
+ Some(true) => "Optimized",
+ _ => "Tuning",
+ })
+ .map(str::to_string)
+ }
}
impl GetIsMining for PowerPlayV1 {
@@ -2235,6 +2267,8 @@ mod tests {
assert_eq!(miner_data.temp_target, None);
assert_eq!(miner_data.temp_hot, Some(85.0));
assert_eq!(miner_data.temp_dangerous, Some(100.0));
+ // Auto-tuner: PerpetualTune Running=true, Optimized=false -> Tuning (T3).
+ assert_eq!(miner_data.tuner_status.as_deref(), Some("Tuning"));
assert_eq!(miner_data.hashboards.len(), 3);
assert_eq!(miner_data.hashboards[0].active, Some(false));
assert_eq!(miner_data.hashboards[1].chips.len(), 110);
@@ -0,0 +1,283 @@
Subject: [PATCH 0032] telemetry: vnish per-hashboard fault messages
Round 20 #1. VNish previously surfaced only a single miner-level state message
(board 0, no component), so per-hashboard faults landed on the control-board
(brain) tooltip instead of the board they name, and the Health column could not
red the specific faulted hashboard.
- DataField::Messages now also collects /miner/chains from the summary (tagged),
alongside /miner/miner_status (now tagged "miner_status"). The summary chains
carry per-chain diagnostics the /chains endpoint omits: chip_statuses
{red,orange,grey} and status.state.
- parse_messages emits one MinerMessage per faulted board, attributed to
MinerComponent::HashBoard { idx } (chain ids are 1-based; board positions
0-based): red chip(s) -> Error, a non-normal chain state with no failed chips
-> Error (state text), orange chip(s) -> Warning. Healthy boards (all grey,
state "mining") produce no message, so no false faults on good miners.
- Applied to both v1_3_0 and v1_2_0 backends. Verified live against healthy
WildRose/VNish S21 miners (10.7.1.x): all chains grey/mining -> zero messages.
diff --git a/vendor/asic-rs-firmwares-vnish/src/backends/v1_2_0/mod.rs b/vendor/asic-rs-firmwares-vnish/src/backends/v1_2_0/mod.rs
index ad2779b6..85011853 100644
--- a/vendor/asic-rs-firmwares-vnish/src/backends/v1_2_0/mod.rs
+++ b/vendor/asic-rs-firmwares-vnish/src/backends/v1_2_0/mod.rs
@@ -20,7 +20,7 @@ use asic_rs_core::{
device::DeviceInfo,
fan::FanData,
hashrate::{HashRate, HashRateUnit},
- message::{MessageSeverity, MinerMessage},
+ message::{MessageSeverity, MinerComponent, MinerMessage},
miner::TuningTarget,
operating_state::OperatingState,
pool::{PoolData, PoolGroupData, PoolURL},
@@ -353,14 +353,26 @@ impl GetDataLocations for VnishV120 {
tag: None,
},
)],
- DataField::Messages => vec![(
- WEB_SUMMARY,
- DataExtractor {
- func: get_by_pointer,
- key: Some("/miner/miner_status"),
- tag: None,
- },
- )],
+ DataField::Messages => vec![
+ (
+ WEB_SUMMARY,
+ DataExtractor {
+ func: get_by_pointer,
+ key: Some("/miner/miner_status"),
+ tag: Some("miner_status"),
+ },
+ ),
+ // Per-hashboard diagnostics (chip status buckets + per-chain state)
+ // for per-board fault messages in parse_messages.
+ (
+ WEB_SUMMARY,
+ DataExtractor {
+ func: get_by_pointer,
+ key: Some("/miner/chains"),
+ tag: Some("chains"),
+ },
+ ),
+ ],
DataField::TuningTarget => vec![(
WEB_SETTINGS,
DataExtractor {
@@ -850,9 +862,12 @@ impl GetMessages for VnishV120 {
/// reported here rather than computed from invented thresholds.
fn parse_messages(&self, data: &HashMap<DataField, Value>) -> Vec<MinerMessage> {
let mut messages = Vec::new();
+ let msg = data.get(&DataField::Messages);
- if let Some(status) = data.get(&DataField::Messages)
- && let Some(state) = status.pointer("/miner_state").and_then(|v| v.as_str())
+ // Miner-level state verdict (now under the "miner_status" tag).
+ if let Some(state) = msg
+ .and_then(|v| v.pointer("/miner_status/miner_state"))
+ .and_then(|v| v.as_str())
{
let normal = matches!(
state.to_lowercase().as_str(),
@@ -872,6 +887,68 @@ impl GetMessages for VnishV120 {
}
}
+ // Per-hashboard faults from the summary chains (round 20 #1). VNish reports
+ // per-chip status buckets (`red` = failed, `orange` = degraded, `grey` =
+ // healthy) and a per-chain state; attribute each fault to its own board so
+ // the Health column reds the right hashboard icon and that icon's tooltip
+ // carries the specific fault, instead of everything landing on the miner-
+ // level (brain) message. Chain ids are 1-based; board positions are 0-based.
+ if let Some(chains) = msg
+ .and_then(|v| v.pointer("/chains"))
+ .and_then(|v| v.as_array())
+ {
+ for chain in chains {
+ let Some(id) = chain.pointer("/id").and_then(|v| v.as_u64()) else {
+ continue;
+ };
+ let idx = id.saturating_sub(1) as u16;
+ let red = chain
+ .pointer("/chip_statuses/red")
+ .and_then(|v| v.as_u64())
+ .unwrap_or(0);
+ let orange = chain
+ .pointer("/chip_statuses/orange")
+ .and_then(|v| v.as_u64())
+ .unwrap_or(0);
+ let state = chain
+ .pointer("/status/state")
+ .and_then(|v| v.as_str())
+ .unwrap_or("");
+ let state_ok = matches!(
+ state.to_lowercase().as_str(),
+ "" | "mining" | "auto-tuning" | "auto_tuning" | "tuning"
+ );
+
+ if red > 0 {
+ messages.push(MinerMessage::with_component(
+ 0,
+ 0,
+ format!("Hashboard {id}: {red} failed chip(s)"),
+ MessageSeverity::Error,
+ Some(MinerComponent::hashboard(idx)),
+ ));
+ } else if !state_ok {
+ // A board not in a normal state but with no failed chips: report
+ // the state itself (e.g. "initializing", "disabled", "stopped").
+ messages.push(MinerMessage::with_component(
+ 0,
+ 0,
+ format!("Hashboard {id}: {state}"),
+ MessageSeverity::Error,
+ Some(MinerComponent::hashboard(idx)),
+ ));
+ } else if orange > 0 {
+ messages.push(MinerMessage::with_component(
+ 0,
+ 0,
+ format!("Hashboard {id}: {orange} degraded chip(s)"),
+ MessageSeverity::Warning,
+ Some(MinerComponent::hashboard(idx)),
+ ));
+ }
+ }
+ }
+
messages
}
}
diff --git a/vendor/asic-rs-firmwares-vnish/src/backends/v1_3_0/mod.rs b/vendor/asic-rs-firmwares-vnish/src/backends/v1_3_0/mod.rs
index 4f0453a1..1301a657 100644
--- a/vendor/asic-rs-firmwares-vnish/src/backends/v1_3_0/mod.rs
+++ b/vendor/asic-rs-firmwares-vnish/src/backends/v1_3_0/mod.rs
@@ -20,7 +20,7 @@ use asic_rs_core::{
device::DeviceInfo,
fan::FanData,
hashrate::{HashRate, HashRateUnit},
- message::{MessageSeverity, MinerMessage},
+ message::{MessageSeverity, MinerComponent, MinerMessage},
miner::TuningTarget,
operating_state::OperatingState,
pool::{PoolData, PoolGroupData, PoolURL},
@@ -351,14 +351,26 @@ impl GetDataLocations for VnishV130 {
tag: None,
},
)],
- DataField::Messages => vec![(
- WEB_SUMMARY,
- DataExtractor {
- func: get_by_pointer,
- key: Some("/miner/miner_status"),
- tag: None,
- },
- )],
+ DataField::Messages => vec![
+ (
+ WEB_SUMMARY,
+ DataExtractor {
+ func: get_by_pointer,
+ key: Some("/miner/miner_status"),
+ tag: Some("miner_status"),
+ },
+ ),
+ // Per-hashboard diagnostics (chip status buckets + per-chain state)
+ // for per-board fault messages in parse_messages.
+ (
+ WEB_SUMMARY,
+ DataExtractor {
+ func: get_by_pointer,
+ key: Some("/miner/chains"),
+ tag: Some("chains"),
+ },
+ ),
+ ],
DataField::TuningPercent => vec![(
WEB_SUMMARY,
DataExtractor {
@@ -805,9 +817,12 @@ impl GetMessages for VnishV130 {
/// reported here rather than computed from invented thresholds.
fn parse_messages(&self, data: &HashMap<DataField, Value>) -> Vec<MinerMessage> {
let mut messages = Vec::new();
+ let msg = data.get(&DataField::Messages);
- if let Some(status) = data.get(&DataField::Messages)
- && let Some(state) = status.pointer("/miner_state").and_then(|v| v.as_str())
+ // Miner-level state verdict (now under the "miner_status" tag).
+ if let Some(state) = msg
+ .and_then(|v| v.pointer("/miner_status/miner_state"))
+ .and_then(|v| v.as_str())
{
let normal = matches!(
state.to_lowercase().as_str(),
@@ -827,6 +842,68 @@ impl GetMessages for VnishV130 {
}
}
+ // Per-hashboard faults from the summary chains (round 20 #1). VNish reports
+ // per-chip status buckets (`red` = failed, `orange` = degraded, `grey` =
+ // healthy) and a per-chain state; attribute each fault to its own board so
+ // the Health column reds the right hashboard icon and that icon's tooltip
+ // carries the specific fault, instead of everything landing on the miner-
+ // level (brain) message. Chain ids are 1-based; board positions are 0-based.
+ if let Some(chains) = msg
+ .and_then(|v| v.pointer("/chains"))
+ .and_then(|v| v.as_array())
+ {
+ for chain in chains {
+ let Some(id) = chain.pointer("/id").and_then(|v| v.as_u64()) else {
+ continue;
+ };
+ let idx = id.saturating_sub(1) as u16;
+ let red = chain
+ .pointer("/chip_statuses/red")
+ .and_then(|v| v.as_u64())
+ .unwrap_or(0);
+ let orange = chain
+ .pointer("/chip_statuses/orange")
+ .and_then(|v| v.as_u64())
+ .unwrap_or(0);
+ let state = chain
+ .pointer("/status/state")
+ .and_then(|v| v.as_str())
+ .unwrap_or("");
+ let state_ok = matches!(
+ state.to_lowercase().as_str(),
+ "" | "mining" | "auto-tuning" | "auto_tuning" | "tuning"
+ );
+
+ if red > 0 {
+ messages.push(MinerMessage::with_component(
+ 0,
+ 0,
+ format!("Hashboard {id}: {red} failed chip(s)"),
+ MessageSeverity::Error,
+ Some(MinerComponent::hashboard(idx)),
+ ));
+ } else if !state_ok {
+ // A board not in a normal state but with no failed chips: report
+ // the state itself (e.g. "initializing", "disabled", "stopped").
+ messages.push(MinerMessage::with_component(
+ 0,
+ 0,
+ format!("Hashboard {id}: {state}"),
+ MessageSeverity::Error,
+ Some(MinerComponent::hashboard(idx)),
+ ));
+ } else if orange > 0 {
+ messages.push(MinerMessage::with_component(
+ 0,
+ 0,
+ format!("Hashboard {id}: {orange} degraded chip(s)"),
+ MessageSeverity::Warning,
+ Some(MinerComponent::hashboard(idx)),
+ ));
+ }
+ }
+ }
+
messages
}
}
@@ -0,0 +1,39 @@
Subject: [PATCH 0005] health tooltips: convert tip area to widget coordinates
Round 19 #2 (the real fix). The GtkTreeView "query-tooltip" handler for the Health
column set a per-icon tip area from gtk_tree_view_get_cell_area, whose rectangle is
in BIN-WINDOW coordinates, but gtk_tooltip_set_tip_area expects WIDGET coordinates.
The area was therefore offset upward by the column-header height, so it did not
contain the pointer -- and GTK suppresses a tooltip whose tip area excludes the
cursor. That is why the health icon tooltips never appeared, while the Errors column
(which sets no tip area) worked. Convert the slot rectangle back to widget
coordinates with gtk_tree_view_convert_bin_window_to_widget_coords before setting it.
diff --git a/cpp_src/widgets_bridge.cpp b/cpp_src/widgets_bridge.cpp
index ba9f1c04..6d09ccb7 100644
--- a/cpp_src/widgets_bridge.cpp
+++ b/cpp_src/widgets_bridge.cpp
@@ -1019,9 +1019,21 @@ static gboolean dvlc_query_tooltip(GtkWidget* tv, gint x, gint y, gboolean keybo
// or moves the tooltip as the pointer crosses from one icon to the next -- the
// old tooltip just stays put with stale text. Setting a per-slot area makes GTK
// hide + re-show + reposition the tooltip for each icon.
+ //
+ // CRITICAL (round 19 #2, the reason the health tooltips never showed): the slot
+ // geometry above (block_left, crect) is in BIN-WINDOW coordinates (what
+ // gtk_tree_view_get_cell_area and get_path_at_pos use), but
+ // gtk_tooltip_set_tip_area expects WIDGET coordinates. Feeding it bin-window
+ // coords offsets the area upward by the header height, so it does not contain
+ // the pointer -- and GTK then suppresses the tooltip entirely (it only shows a
+ // tooltip whose tip area contains the cursor). The Errors column worked because
+ // it sets no tip area. Convert the slot rect back to widget coordinates.
+ gint area_wx = 0, area_wy = 0;
+ gtk_tree_view_convert_bin_window_to_widget_coords(
+ GTK_TREE_VIEW(tv), block_left + slot * adv, crect.y, &area_wx, &area_wy);
GdkRectangle area;
- area.x = block_left + slot * adv;
- area.y = crect.y;
+ area.x = area_wx;
+ area.y = area_wy;
area.width = adv;
area.height = crect.height;
gtk_tooltip_set_tip_area(tooltip, &area);
@@ -1019,9 +1019,21 @@ static gboolean dvlc_query_tooltip(GtkWidget* tv, gint x, gint y, gboolean keybo
// or moves the tooltip as the pointer crosses from one icon to the next -- the
// old tooltip just stays put with stale text. Setting a per-slot area makes GTK
// hide + re-show + reposition the tooltip for each icon.
//
// CRITICAL (round 19 #2, the reason the health tooltips never showed): the slot
// geometry above (block_left, crect) is in BIN-WINDOW coordinates (what
// gtk_tree_view_get_cell_area and get_path_at_pos use), but
// gtk_tooltip_set_tip_area expects WIDGET coordinates. Feeding it bin-window
// coords offsets the area upward by the header height, so it does not contain
// the pointer -- and GTK then suppresses the tooltip entirely (it only shows a
// tooltip whose tip area contains the cursor). The Errors column worked because
// it sets no tip area. Convert the slot rect back to widget coordinates.
gint area_wx = 0, area_wy = 0;
gtk_tree_view_convert_bin_window_to_widget_coords(
GTK_TREE_VIEW(tv), block_left + slot * adv, crect.y, &area_wx, &area_wy);
GdkRectangle area;
area.x = block_left + slot * adv;
area.y = crect.y;
area.x = area_wx;
area.y = area_wy;
area.width = adv;
area.height = crect.height;
gtk_tooltip_set_tip_area(tooltip, &area);
+1 -1
View File
@@ -1 +1 @@
{"$comment":"This file only protects against accidental modifications. It is not a security mechanism and does not protect against malicious changes.","files":{".cargo_vcs_info.json":"20173e90df24055f67bf03e2b3bb3bc396168f39aa45b36828b1963749d7838a","Cargo.lock":"2f4e619eefd164b57242e6bae57ddf3f73053f6af308a1dea181936d6a41a291","Cargo.toml":"2310d9df1678c138cc82922659ba19d00a92fd2f107a21047890e53fd79c492d","Cargo.toml.orig":"6c6d97588811d1b3b4c0839aa016d6133745b96f7620d390d093d60a8e29d501","src/config/collector.rs":"8c79ac6d3a04f93efc78b176ef7f6b1dc44e50d2bc95d813439b47422d6bb28f","src/config/fan.rs":"80c305261643542f11368342c3dcea29bbd3b016fb6f2962fdad6489dac2734a","src/config/mod.rs":"0d14701319d84ded3cd2f6ba6f92bff18c8e5cff90a2229592d97baae3ed4de3","src/config/pools.rs":"a74ab648053eb51305c4e1bbb6c05db57575ff2542b4fd53d28d33687a62eee3","src/config/preset.rs":"e68d694d3cf537c67ecb3b535a77904e25cc3b206a6ec214fc904011229b8a7c","src/config/scaling.rs":"f402e00c75ef796068765ab1a82ce6a3a0eb88f484c4a67f574ede90a3abaeeb","src/config/temperature.rs":"c6fd6f9cc8e565f27b58fb571fd33b58dcf2112a50b570f6b54a3c11c13d1fbe","src/config/timezone.rs":"4470fd704885e62e3bc8da8087dce6b002dd3fa92cec54d96ce88a06f03e1cbe","src/config/tuning.rs":"31a0826419d4690315f6eecc03250bfb4e5342431ff261015a9f9f3d87e69b6c","src/data/board.rs":"0f2547d5763225a3c5387da695de52b65c38eeb7942d14ecef36a72388c7a451","src/data/capabilities.rs":"29cbab6262fb8888b30b4674a30ef03983e005b4e18eefddfbbf9c568e1e1e17","src/data/collector.rs":"84632f4f2c47834b49e2c785f6237432864fa618ad98601f1ddb1366581ee80a","src/data/command.rs":"53cd7e5e87888a76ba866b33b6d87400112bc3eeb4b5e331a381dfbb2c04579e","src/data/deserialize.rs":"461a84defd6f2fb53c8b3c059463c2bfcf69df80db0f5aa2d30b47e710163992","src/data/device.rs":"813b0d41834b217da9f2d51fc7d9cb0f12db6aa7501dd43b6c3f992f29e7827f","src/data/fan.rs":"9307626335008c04d5e5c742bdd7ff5c6e9055dbd84d0e7a655e6e656da3df78","src/data/firmware.rs":"648acace3b289f623cf678f36fb854ff5ddafb8e2f651ae4a15128ae719f87ba","src/data/hashrate.rs":"037a4cce611c9dafb03eb18c4d088c42df5a9bf23f376c0436aded7a3d657b0d","src/data/message.rs":"7b399ab1a0b6e43e61a5461d29a2752beed2d1fd7b214eb891572f8994d47c11","src/data/miner.rs":"5f188064a412c74a6242c410806186ac50b8642f5a1d67b1994bf25b2da0bd0a","src/data/mod.rs":"f63a6bd20fb2389e434257ccfe646321b25449993c937ece0d29850e0ab2279f","src/data/operating_state.rs":"7dccbfcc3eada16d0f890772323d4626fa9f298f7fc1882675ae3672d94f6da3","src/data/pool.rs":"a6bff9e56239915a095c4f99187a2d5f4631c3641332071c5134128cacaecceb","src/data/serialize.rs":"347f8cdf619156ac73aa0d89ed41555bd7332ef60cc92f945bc0f16f4ad29137","src/data/share.rs":"99adfa10cfc59e245f41f77c70951e7aac5b3422e48abd270c56c3db122bbb6d","src/discovery.rs":"efc236592941e72609bd3be18551834f648b608caaf73b9555f75b9838692f6b","src/errors.rs":"0238c8cb6585d05cdd01aec031895e5240e3883f44f3fa22a7398027a360ef1a","src/lib.rs":"e2c8ecde3cf8edda920470f8b938056b60448184a5c81672f04a8e0235c3cf22","src/test/api.rs":"5defa33709c14cadfa7390981c3c7d3f324ef1878e4ee56c089dbf85665b57ae","src/test/mod.rs":"0b44b178ea8950b75fe09047797085f03e5c0eb17d62ca1f3e62a8f643fda87c","src/test/util.rs":"c6f5a3cccb40f1d6a7c316b52c70c59f8dda24a6ad83cb5aeac0b5d970debd0e","src/traits/auth.rs":"dffa58542ac9e57175f5dcad261f80b3efeba76ef3a039b0d9c6f9eb14a19893","src/traits/discovery.rs":"b232ea113c675178ae62c9f5ee35d0329e3a4465388133992c0db8d697113e34","src/traits/entry.rs":"03cf30045be6ba92a414d36990d316d572be21e6c66039ed8193da9a3c27cf53","src/traits/firmware.rs":"94831620bb8c8c4ce2ad69f8fd7b9679ee1de63b1f99529559e24f2118710638","src/traits/identification.rs":"67866931aa28c2e5b0e07dbacae47c1d82b53addea333f75033c451bbd2c9a77","src/traits/make.rs":"1d099cd51ecb354d20acef4cc1d2b3f75b682b6d6c887553861e185602d465f4","src/traits/miner.rs":"da2fe3a9621124d2606d6673be75f9478a4d53d4892b0f64e64484ccd85483db","src/traits/mod.rs":"61406c4d2603299e4bad57c6f90115cadf93cee50a857bbfbb00d99f3a6873ac","src/traits/model.rs":"efde2b5cae4c4f018436bb68b236f354b5a733f7dafdeaf3f1c534b469a22d64","src/util.rs":"53255c65e85b97236cb34b452e2cb522edf377f49d2232645e0e0e33c447bb23"},"package":"1f25e625fc4c645ce995c5609a9fdff6f047d6a5e4d6be9dc167999a43197f58"}
{"$comment":"This file only protects against accidental modifications. It is not a security mechanism and does not protect against malicious changes.","files":{".cargo_vcs_info.json":"20173e90df24055f67bf03e2b3bb3bc396168f39aa45b36828b1963749d7838a","Cargo.lock":"2f4e619eefd164b57242e6bae57ddf3f73053f6af308a1dea181936d6a41a291","Cargo.toml":"2310d9df1678c138cc82922659ba19d00a92fd2f107a21047890e53fd79c492d","Cargo.toml.orig":"6c6d97588811d1b3b4c0839aa016d6133745b96f7620d390d093d60a8e29d501","src/config/collector.rs":"8c79ac6d3a04f93efc78b176ef7f6b1dc44e50d2bc95d813439b47422d6bb28f","src/config/fan.rs":"80c305261643542f11368342c3dcea29bbd3b016fb6f2962fdad6489dac2734a","src/config/mod.rs":"0d14701319d84ded3cd2f6ba6f92bff18c8e5cff90a2229592d97baae3ed4de3","src/config/pools.rs":"a74ab648053eb51305c4e1bbb6c05db57575ff2542b4fd53d28d33687a62eee3","src/config/preset.rs":"e68d694d3cf537c67ecb3b535a77904e25cc3b206a6ec214fc904011229b8a7c","src/config/scaling.rs":"f402e00c75ef796068765ab1a82ce6a3a0eb88f484c4a67f574ede90a3abaeeb","src/config/temperature.rs":"c6fd6f9cc8e565f27b58fb571fd33b58dcf2112a50b570f6b54a3c11c13d1fbe","src/config/timezone.rs":"4470fd704885e62e3bc8da8087dce6b002dd3fa92cec54d96ce88a06f03e1cbe","src/config/tuning.rs":"31a0826419d4690315f6eecc03250bfb4e5342431ff261015a9f9f3d87e69b6c","src/data/board.rs":"0f2547d5763225a3c5387da695de52b65c38eeb7942d14ecef36a72388c7a451","src/data/capabilities.rs":"29cbab6262fb8888b30b4674a30ef03983e005b4e18eefddfbbf9c568e1e1e17","src/data/collector.rs":"b0ea657174d7259a7e9d9c232e707293940a4cce2558e1976dbf6ec5c726fe71","src/data/command.rs":"53cd7e5e87888a76ba866b33b6d87400112bc3eeb4b5e331a381dfbb2c04579e","src/data/deserialize.rs":"461a84defd6f2fb53c8b3c059463c2bfcf69df80db0f5aa2d30b47e710163992","src/data/device.rs":"813b0d41834b217da9f2d51fc7d9cb0f12db6aa7501dd43b6c3f992f29e7827f","src/data/fan.rs":"9307626335008c04d5e5c742bdd7ff5c6e9055dbd84d0e7a655e6e656da3df78","src/data/firmware.rs":"648acace3b289f623cf678f36fb854ff5ddafb8e2f651ae4a15128ae719f87ba","src/data/hashrate.rs":"037a4cce611c9dafb03eb18c4d088c42df5a9bf23f376c0436aded7a3d657b0d","src/data/message.rs":"7b399ab1a0b6e43e61a5461d29a2752beed2d1fd7b214eb891572f8994d47c11","src/data/miner.rs":"7a0d2a7ce07ac5480ca0e1e80549828220df7802077f735cd334f6f21f0e0112","src/data/mod.rs":"f63a6bd20fb2389e434257ccfe646321b25449993c937ece0d29850e0ab2279f","src/data/operating_state.rs":"7dccbfcc3eada16d0f890772323d4626fa9f298f7fc1882675ae3672d94f6da3","src/data/pool.rs":"a6bff9e56239915a095c4f99187a2d5f4631c3641332071c5134128cacaecceb","src/data/serialize.rs":"347f8cdf619156ac73aa0d89ed41555bd7332ef60cc92f945bc0f16f4ad29137","src/data/share.rs":"99adfa10cfc59e245f41f77c70951e7aac5b3422e48abd270c56c3db122bbb6d","src/discovery.rs":"efc236592941e72609bd3be18551834f648b608caaf73b9555f75b9838692f6b","src/errors.rs":"0238c8cb6585d05cdd01aec031895e5240e3883f44f3fa22a7398027a360ef1a","src/lib.rs":"e2c8ecde3cf8edda920470f8b938056b60448184a5c81672f04a8e0235c3cf22","src/test/api.rs":"5defa33709c14cadfa7390981c3c7d3f324ef1878e4ee56c089dbf85665b57ae","src/test/mod.rs":"0b44b178ea8950b75fe09047797085f03e5c0eb17d62ca1f3e62a8f643fda87c","src/test/util.rs":"c6f5a3cccb40f1d6a7c316b52c70c59f8dda24a6ad83cb5aeac0b5d970debd0e","src/traits/auth.rs":"dffa58542ac9e57175f5dcad261f80b3efeba76ef3a039b0d9c6f9eb14a19893","src/traits/discovery.rs":"b232ea113c675178ae62c9f5ee35d0329e3a4465388133992c0db8d697113e34","src/traits/entry.rs":"03cf30045be6ba92a414d36990d316d572be21e6c66039ed8193da9a3c27cf53","src/traits/firmware.rs":"94831620bb8c8c4ce2ad69f8fd7b9679ee1de63b1f99529559e24f2118710638","src/traits/identification.rs":"67866931aa28c2e5b0e07dbacae47c1d82b53addea333f75033c451bbd2c9a77","src/traits/make.rs":"1d099cd51ecb354d20acef4cc1d2b3f75b682b6d6c887553861e185602d465f4","src/traits/miner.rs":"1adf2f76b04fcaf0a4042f055eab07b2c87ea76fb8856a3c6741defa98e1f354","src/traits/mod.rs":"61406c4d2603299e4bad57c6f90115cadf93cee50a857bbfbb00d99f3a6873ac","src/traits/model.rs":"efde2b5cae4c4f018436bb68b236f354b5a733f7dafdeaf3f1c534b469a22d64","src/util.rs":"53255c65e85b97236cb34b452e2cb522edf377f49d2232645e0e0e33c447bb23"},"package":"1f25e625fc4c645ce995c5609a9fdff6f047d6a5e4d6be9dc167999a43197f58"}
+3
View File
@@ -68,6 +68,9 @@ pub enum DataField {
/// Board temperature safety thresholds (critical / shutdown), in Celsius.
#[cfg_attr(feature = "python", pydantic(value = "TemperatureLimits"))]
TemperatureLimits,
/// Auto-tuner status (a human-readable label, e.g. "Stable", "Tuning").
#[cfg_attr(feature = "python", pydantic(value = "TunerStatus"))]
TunerStatus,
/// PSU fan speed or configuration.
#[cfg_attr(feature = "python", pydantic(value = "PsuFans"))]
PsuFans,
+9 -4
View File
@@ -181,10 +181,12 @@ pub struct MinerData {
/// Miner-level fan duty cycle as a percentage (0-100), when reported. Firmware
/// exposes no maximum RPM, so this duty cycle is the normalized fan indicator.
pub fan_speed_percent: Option<f64>,
/// Board critical temperature threshold in Celsius, when reported (round 19 #10).
pub temp_critical: Option<f64>,
/// Board shutdown temperature threshold in Celsius, when reported (round 19 #10).
pub temp_shutdown: Option<f64>,
/// Board target temperature threshold in Celsius, when reported (round 19 #10).
pub temp_target: Option<f64>,
/// Board hot temperature threshold in Celsius, when reported (round 19 #10).
pub temp_hot: Option<f64>,
/// Board dangerous temperature threshold in Celsius, when reported (round 19 #10).
pub temp_dangerous: Option<f64>,
/// The current PDU fan information for the miner
pub psu_fans: Vec<FanData>,
/// The average temperature across all chips in the miner
@@ -234,6 +236,9 @@ pub struct MinerData {
#[serde(default)]
#[cfg_attr(feature = "python", pydantic(default = None))]
pub operating_state: Option<OperatingState>,
/// Auto-tuner status as a human-readable label (round 19 #10), when reported:
/// e.g. "Stable"/"Tuning" (Braiins), "Optimized"/"Tuning"/"Off" (ePIC).
pub tuner_status: Option<String>,
/// The current pools configured on the miner
pub pools: Vec<PoolGroupData>,
/// Difficulty of the best share found over the miner's lifetime, when reported.
+22 -7
View File
@@ -282,7 +282,7 @@ impl<
let tuning_capabilities = self.parse_tuning_capabilities(&data);
let fluid_temperature = self.parse_fluid_temperature(&data);
let outlet_fluid_temperature = self.parse_outlet_fluid_temperature(&data);
let (temp_critical, temp_shutdown) = self.parse_temperature_limits(&data);
let (temp_target, temp_hot, temp_dangerous) = self.parse_temperature_limits(&data);
let fans = self.parse_fans(&data);
let fan_speed_percent = self.parse_fan_speed_percent(&data);
let psu_fans = self.parse_psu_fans(&data);
@@ -290,6 +290,7 @@ impl<
let light_flashing = self.parse_light_flashing(&data);
let is_mining = self.parse_is_mining(&data);
let operating_state = self.parse_operating_state(&data);
let tuner_status = self.parse_tuner_status(&data);
let messages = self.parse_messages(&data);
let pools = self.parse_pools(&data);
let best_share = self.parse_best_share(&data);
@@ -369,8 +370,9 @@ impl<
expected_fans: device_info.hardware.fans,
fans,
fan_speed_percent,
temp_critical,
temp_shutdown,
temp_target,
temp_hot,
temp_dangerous,
psu_fans,
average_temperature,
fluid_temperature,
@@ -391,6 +393,7 @@ impl<
uptime,
is_mining,
operating_state,
tuner_status,
pools,
best_share,
@@ -744,14 +747,14 @@ pub trait GetFluidTemperature: CollectData {
) -> Option<Temperature> {
None
}
/// Board temperature safety thresholds as (critical, shutdown) in Celsius.
/// Backends that expose them override this; others return (None, None).
/// Board temperature safety thresholds as (target, hot, dangerous) in Celsius.
/// Backends that expose them override this; others return (None, None, None).
#[allow(unused_variables)]
fn parse_temperature_limits(
&self,
data: &HashMap<DataField, Value>,
) -> (Option<f64>, Option<f64>) {
(None, None)
) -> (Option<f64>, Option<f64>, Option<f64>) {
(None, None, None)
}
}
@@ -913,6 +916,18 @@ pub trait GetOperatingState: CollectData {
fn parse_operating_state(&self, data: &HashMap<DataField, Value>) -> Option<OperatingState> {
None
}
#[tracing::instrument(level = "debug")]
async fn get_tuner_status(&self) -> Option<String> {
let mut collector = self.get_collector();
let data = collector.collect(&[DataField::TunerStatus]).await;
self.parse_tuner_status(&data)
}
/// Auto-tuner status as a human-readable label. Backends that expose it override
/// this; others return None.
#[allow(unused_variables)]
fn parse_tuner_status(&self, data: &HashMap<DataField, Value>) -> Option<String> {
None
}
}
// Pools
File diff suppressed because one or more lines are too long
+55 -1
View File
@@ -272,6 +272,16 @@ impl GetDataLocations for BraiinsV2507 {
tag: None,
},
)],
// Auto-tuner status (round 19 #10, T3): performance/tuner-state
// overall_tuner_state enum; command already fetched.
DataField::TunerStatus => vec![(
WEB_PERFORMANCE_TUNER_STATE,
DataExtractor {
func: get_by_pointer,
key: Some("/overall_tuner_state"),
tag: None,
},
)],
DataField::Uptime => vec![(
WEB_MINER_DETAILS,
DataExtractor {
@@ -372,6 +382,16 @@ impl GetDataLocations for BraiinsV2507 {
tag: None,
},
)],
// Board temp thresholds (round 19 #10, T3): cooling_constraints defaults
// (target/hot/dangerous); WEB_CONSTRAINTS already fetched.
DataField::TemperatureLimits => vec![(
WEB_CONSTRAINTS,
DataExtractor {
func: get_by_pointer,
key: Some("/cooling_constraints"),
tag: None,
},
)],
_ => vec![],
}
}
@@ -620,6 +640,21 @@ impl GetOperatingState for BraiinsV2507 {
},
})
}
fn parse_tuner_status(&self, data: &HashMap<DataField, Value>) -> Option<String> {
// BOS+ TunerState enum (bos-plus-api performance.proto): 1 Disabled,
// 2 Stable, 3 Tuning, 4 Error, 5 Continuous, 6 Preheat (round 19 #10, T3).
Some(match data.get(&DataField::TunerStatus)?.as_u64()? {
0 => return None,
1 => "Disabled",
2 => "Stable",
3 => "Tuning",
4 => "Error",
5 => "Continuous",
6 => "Preheat",
_ => return None,
})
.map(str::to_string)
}
}
impl GetIsMining for BraiinsV2507 {
@@ -725,7 +760,26 @@ impl GetScaledTuningTarget for BraiinsV2507 {
}
}
impl GetFluidTemperature for BraiinsV2507 {}
impl GetFluidTemperature for BraiinsV2507 {
fn parse_temperature_limits(
&self,
data: &HashMap<DataField, Value>,
) -> (Option<f64>, Option<f64>, Option<f64>) {
// Braiins cooling_constraints target/hot/dangerous default thresholds in
// degree_c (round 19 #10, T3).
let d = data.get(&DataField::TemperatureLimits);
let f = |k: &str| {
d.and_then(|v| v.pointer(&format!("/{k}/default/degree_c")))
.and_then(|v| v.as_f64())
.filter(|v| v.is_finite() && *v > 0.0)
};
(
f("target_temperature"),
f("hot_temperature"),
f("dangerous_temperature"),
)
}
}
impl GetTuningCapabilities for BraiinsV2507 {
fn parse_tuning_capabilities(
&self,
+72 -5
View File
@@ -275,6 +275,16 @@ impl GetDataLocations for BraiinsV2604 {
tag: None,
},
)],
// Auto-tuner status (round 19 #10, T3): performance/tuner-state
// overall_tuner_state enum; command already fetched.
DataField::TunerStatus => vec![(
WEB_PERFORMANCE_TUNER_STATE,
DataExtractor {
func: get_by_pointer,
key: Some("/overall_tuner_state"),
tag: None,
},
)],
DataField::Uptime => vec![(
WEB_MINER_DETAILS,
DataExtractor {
@@ -393,6 +403,16 @@ impl GetDataLocations for BraiinsV2604 {
tag: None,
},
)],
// Board temp thresholds (round 19 #10, T3): cooling_constraints defaults
// (target/hot/dangerous); WEB_CONSTRAINTS already fetched.
DataField::TemperatureLimits => vec![(
WEB_CONSTRAINTS,
DataExtractor {
func: get_by_pointer,
key: Some("/cooling_constraints"),
tag: None,
},
)],
_ => vec![],
}
}
@@ -657,6 +677,21 @@ impl GetOperatingState for BraiinsV2604 {
},
})
}
fn parse_tuner_status(&self, data: &HashMap<DataField, Value>) -> Option<String> {
// BOS+ TunerState enum (bos-plus-api performance.proto): 1 Disabled,
// 2 Stable, 3 Tuning, 4 Error, 5 Continuous, 6 Preheat (round 19 #10, T3).
Some(match data.get(&DataField::TunerStatus)?.as_u64()? {
0 => return None,
1 => "Disabled",
2 => "Stable",
3 => "Tuning",
4 => "Error",
5 => "Continuous",
6 => "Preheat",
_ => return None,
})
.map(str::to_string)
}
}
impl GetIsMining for BraiinsV2604 {
@@ -775,7 +810,26 @@ impl GetScaledTuningTarget for BraiinsV2604 {
}
}
impl GetFluidTemperature for BraiinsV2604 {}
impl GetFluidTemperature for BraiinsV2604 {
fn parse_temperature_limits(
&self,
data: &HashMap<DataField, Value>,
) -> (Option<f64>, Option<f64>, Option<f64>) {
// Braiins cooling_constraints target/hot/dangerous default thresholds in
// degree_c (round 19 #10, T3).
let d = data.get(&DataField::TemperatureLimits);
let f = |k: &str| {
d.and_then(|v| v.pointer(&format!("/{k}/default/degree_c")))
.and_then(|v| v.as_f64())
.filter(|v| v.is_finite() && *v > 0.0)
};
(
f("target_temperature"),
f("hot_temperature"),
f("dangerous_temperature"),
)
}
}
impl GetTuningCapabilities for BraiinsV2604 {
fn parse_tuning_capabilities(
&self,
@@ -1167,10 +1221,10 @@ mod tests {
use super::*;
use crate::test::json::v26_04::{
WEB_COOLING_STATE_COMMAND, WEB_HASHBOARDS_COMMAND, WEB_LOCATE_COMMAND,
WEB_MINER_CONFIGURATION_COMMAND, WEB_MINER_DETAILS_COMMAND, WEB_MINER_STATS_COMMAND,
WEB_NETWORK_COMMAND, WEB_PERFORMANCE_TUNER_STATE_COMMAND, WEB_POOLS_COMMAND,
WEB_VERSION_COMMAND,
WEB_CONSTRAINTS_COMMAND, WEB_COOLING_STATE_COMMAND, WEB_HASHBOARDS_COMMAND,
WEB_LOCATE_COMMAND, WEB_MINER_CONFIGURATION_COMMAND, WEB_MINER_DETAILS_COMMAND,
WEB_MINER_STATS_COMMAND, WEB_NETWORK_COMMAND, WEB_PERFORMANCE_TUNER_STATE_COMMAND,
WEB_POOLS_COMMAND, WEB_VERSION_COMMAND,
};
#[tokio::test]
@@ -1251,6 +1305,13 @@ mod tests {
},
Value::from_str(WEB_HASHBOARDS_COMMAND).unwrap(),
);
results.insert(
MinerCommand::WebAPI {
command: "configuration/constraints",
parameters: None,
},
Value::from_str(WEB_CONSTRAINTS_COMMAND).unwrap(),
);
results.insert(
MinerCommand::WebAPI {
command: "actions/locate",
@@ -1313,6 +1374,12 @@ mod tests {
// 19 #10, T3).
let fan_pct = miner_data.fan_speed_percent.expect("braiins fan duty");
assert!((fan_pct - 92.0).abs() < 1e-6);
// Board temp thresholds from cooling_constraints defaults (round 19 #10, T3).
assert_eq!(miner_data.temp_target, Some(60.0));
assert_eq!(miner_data.temp_hot, Some(80.0));
assert_eq!(miner_data.temp_dangerous, Some(90.0));
// Auto-tuner status: overall_tuner_state 5 -> Continuous (round 19 #10, T3).
assert_eq!(miner_data.tuner_status.as_deref(), Some("Continuous"));
}
#[test]
@@ -0,0 +1,200 @@
{
"tuner_constraints": {
"power_target": {
"default": {
"watt": 2832
},
"min": {
"watt": 944
},
"max": {
"watt": 6435
}
},
"hashrate_target": {
"default": {
"terahash_per_second": 96.0
},
"min": {
"terahash_per_second": 70.75
},
"max": {
"terahash_per_second": 252.57
}
},
"enabled": {
"default": true
},
"default_mode": 1
},
"cooling_constraints": {
"default_cooling_mode": 1,
"target_temperature": {
"default": {
"degree_c": 60.0
},
"min": {
"degree_c": 0.0
},
"max": {
"degree_c": 200.0
}
},
"hot_temperature": {
"default": {
"degree_c": 80.0
},
"min": {
"degree_c": 0.0
},
"max": {
"degree_c": 200.0
}
},
"dangerous_temperature": {
"default": {
"degree_c": 90.0
},
"min": {
"degree_c": 0.0
},
"max": {
"degree_c": 200.0
}
},
"fan_speed_ratio": {
"default": 1.0,
"min": 0.0,
"max": 1.0
},
"minimum_required_fans": {
"default": 2,
"min": 0,
"max": 4
},
"min_fan_speed": {
"default": 0,
"min": 0,
"max": 100
},
"max_fan_speed": {
"default": 100,
"min": 0,
"max": 100
},
"pause_cooldown_fan_speed_ratio": {
"default": 0.2,
"min": 0.0,
"max": 1.0
},
"default_fan_pause_mode": 2,
"default_fan_pause_runtime": 1,
"fan_pause_runtime_limited_duration_s": 120
},
"dps_constraints": {
"power_step": {
"default": {
"watt": 300
},
"min": {
"watt": 1
},
"max": {
"watt": 1000
}
},
"hashrate_step": {
"default": {
"terahash_per_second": 11.0
},
"min": {
"terahash_per_second": 0.1
},
"max": {
"terahash_per_second": 100.0
}
},
"min_power_target": {
"default": {
"watt": 944
},
"min": {
"watt": 944
},
"max": {
"watt": 6435
}
},
"min_hashrate_target": {
"default": {
"terahash_per_second": 70.75
},
"min": {
"terahash_per_second": 70.75
},
"max": {
"terahash_per_second": 252.57
}
},
"shutdown_enabled": {
"default": false
},
"shutdown_duration": {
"default": {
"hours": 3
},
"min": {
"hours": 0
},
"max": {
"hours": 999
}
},
"enabled": {
"default": true
},
"mode": 1,
"on_start_target_percent": {
"default": 100,
"min": 50,
"max": 100
}
},
"hashboards_constraints": {
"hashboard_ids": [
"1",
"2",
"3"
],
"enabled": {
"default": true
},
"frequency": {
"default": {
"hertz": 505000000.0
},
"min": {
"hertz": 50000000.0
},
"max": {
"hertz": 1300000000.0
}
},
"voltage": {
"default": {
"volt": 13.4
},
"min": {
"volt": 11.96
},
"max": {
"volt": 15.2
}
},
"quick_ramping_time_s": {
"default": 30,
"min": 2,
"max": 600
}
}
}
@@ -12,3 +12,4 @@ pub(crate) const WEB_POOLS_COMMAND: &str = include_str!("pools.json");
pub(crate) const WEB_COOLING_STATE_COMMAND: &str = include_str!("cooling_state.json");
pub(crate) const WEB_HASHBOARDS_COMMAND: &str = include_str!("miner_hw_hashboards.json");
pub(crate) const WEB_LOCATE_COMMAND: &str = include_str!("actions_locate.json");
pub(crate) const WEB_CONSTRAINTS_COMMAND: &str = include_str!("configuration_constraints.json");
+1 -1
View File
@@ -1 +1 @@
{"$comment":"This file only protects against accidental modifications. It is not a security mechanism and does not protect against malicious changes.","files":{".cargo_vcs_info.json":"4c9489c1f9b5f16e3fd8ab777da35bb120ccd0ca05f780cf94853c89fb5c8946","Cargo.lock":"69db8793725d6071e21b4353fb89537912096d7eccebd6ee597367330141f613","Cargo.toml":"df82261a9c3187bee15a7d6092d54ad2e9c7e4d1f127cd577c457d913f6881cf","Cargo.toml.orig":"e7c4ef90bc86763dad35d1a4da1c17c7e2f59eaac79e2f011647ae31c43d5e2b","src/backends/mod.rs":"1362c4d3805dccb7a78ef6b45d6a81b8f63b2be75fcf80329b6c2b0dd9e2d5c5","src/backends/v1/mod.rs":"b2b4155236fae7cc3e112f892b64ea1d476e90ec591f3ad9fec26fe3ce03bb35","src/backends/v1/web.rs":"3a567a4f581baa5d9d2d4e59d8acc754eec51d49b0a4f5434d87614b037a4a55","src/firmware.rs":"fb88124a51089756cc3271f3d4a234d73add61ab919c4710ef26a52dc8b5ef80","src/lib.rs":"53f7acddeff8f7d82f80d09e0a9f91962011f9ccf2e441c4ca05cd7fc4eb292e","src/test/json/mod.rs":"24191681066d5cf6a3022ad59c1baa92b57e3ce7717bb78d6a682af9e19a38c4","src/test/json/v1/capabilities.json":"d2b3dae7aa2a1e2977e0ddf62cf2d730de64cf12bf62388c12fd23dc5278bbcb","src/test/json/v1/chip_clocks.json":"d1f46d3aad6ad55ec1c02d0b26aa4c5034c1ccaefb130d7b0e46efe48bb122a0","src/test/json/v1/chip_hashrates.json":"9601a1289f93fe4e27c722d51b3a31daa71aec71f2c29e71f6d1eefe01edf7f2","src/test/json/v1/chip_temps.json":"cb7390e424af57f55f0c974ddfe0c98c4d5b4dbcd85887e38ff8caf7b19f62fe","src/test/json/v1/chip_voltages.json":"cb7390e424af57f55f0c974ddfe0c98c4d5b4dbcd85887e38ff8caf7b19f62fe","src/test/json/v1/mod.rs":"5671105221b84b0b6edb2df34b25bfc9e33459da285d4316be0db23ddb630e8d","src/test/json/v1/network.json":"3374b419fa2f0bc19544c670e08118bbc45bd4d121a577c5a6403c8c8100f628","src/test/json/v1/summary.json":"ac8ac018da9d619b5884f283b730bad2bf0a7e8f2032a7119193c9e5d87d6a7c","src/test/json/v1/temps.json":"794edf870985ed4398ead96670b8f5d01deb4d825fb14a8325087a29cd939fa8","src/test/mod.rs":"ed52c3d613eabc4a0346bb38bcfdf7a94933d61e368d3c9094821edeab92f81b"},"package":"268dc7c8b3289fccd3230ff87f7bfc727a3e7e2f6f72ae56ab9d27c63eabc5cf"}
{"$comment":"This file only protects against accidental modifications. It is not a security mechanism and does not protect against malicious changes.","files":{".cargo_vcs_info.json":"4c9489c1f9b5f16e3fd8ab777da35bb120ccd0ca05f780cf94853c89fb5c8946","Cargo.lock":"69db8793725d6071e21b4353fb89537912096d7eccebd6ee597367330141f613","Cargo.toml":"df82261a9c3187bee15a7d6092d54ad2e9c7e4d1f127cd577c457d913f6881cf","Cargo.toml.orig":"e7c4ef90bc86763dad35d1a4da1c17c7e2f59eaac79e2f011647ae31c43d5e2b","src/backends/mod.rs":"1362c4d3805dccb7a78ef6b45d6a81b8f63b2be75fcf80329b6c2b0dd9e2d5c5","src/backends/v1/mod.rs":"b42ecb0edb9e92f5de47fbac632b3f6edcb0160546619dc619ba75a9f070e791","src/backends/v1/web.rs":"3a567a4f581baa5d9d2d4e59d8acc754eec51d49b0a4f5434d87614b037a4a55","src/firmware.rs":"fb88124a51089756cc3271f3d4a234d73add61ab919c4710ef26a52dc8b5ef80","src/lib.rs":"53f7acddeff8f7d82f80d09e0a9f91962011f9ccf2e441c4ca05cd7fc4eb292e","src/test/json/mod.rs":"24191681066d5cf6a3022ad59c1baa92b57e3ce7717bb78d6a682af9e19a38c4","src/test/json/v1/capabilities.json":"d2b3dae7aa2a1e2977e0ddf62cf2d730de64cf12bf62388c12fd23dc5278bbcb","src/test/json/v1/chip_clocks.json":"d1f46d3aad6ad55ec1c02d0b26aa4c5034c1ccaefb130d7b0e46efe48bb122a0","src/test/json/v1/chip_hashrates.json":"9601a1289f93fe4e27c722d51b3a31daa71aec71f2c29e71f6d1eefe01edf7f2","src/test/json/v1/chip_temps.json":"cb7390e424af57f55f0c974ddfe0c98c4d5b4dbcd85887e38ff8caf7b19f62fe","src/test/json/v1/chip_voltages.json":"cb7390e424af57f55f0c974ddfe0c98c4d5b4dbcd85887e38ff8caf7b19f62fe","src/test/json/v1/mod.rs":"5671105221b84b0b6edb2df34b25bfc9e33459da285d4316be0db23ddb630e8d","src/test/json/v1/network.json":"3374b419fa2f0bc19544c670e08118bbc45bd4d121a577c5a6403c8c8100f628","src/test/json/v1/summary.json":"ac8ac018da9d619b5884f283b730bad2bf0a7e8f2032a7119193c9e5d87d6a7c","src/test/json/v1/temps.json":"794edf870985ed4398ead96670b8f5d01deb4d825fb14a8325087a29cd939fa8","src/test/mod.rs":"ed52c3d613eabc4a0346bb38bcfdf7a94933d61e368d3c9094821edeab92f81b"},"package":"268dc7c8b3289fccd3230ff87f7bfc727a3e7e2f6f72ae56ab9d27c63eabc5cf"}
+43 -6
View File
@@ -594,6 +594,16 @@ impl GetDataLocations for PowerPlayV1 {
tag: None,
},
)],
// Auto-tuner status (round 19 #10, T3): PowerPlay PerpetualTune; summary
// already fetched.
DataField::TunerStatus => vec![(
WEB_SUMMARY,
DataExtractor {
func: get_by_pointer,
key: Some("/PerpetualTune"),
tag: None,
},
)],
DataField::LightFlashing => vec![(
WEB_SUMMARY,
DataExtractor {
@@ -1153,15 +1163,16 @@ impl GetFluidTemperature for PowerPlayV1 {
fn parse_temperature_limits(
&self,
data: &HashMap<DataField, Value>,
) -> (Option<f64>, Option<f64>) {
// ePIC summary /Misc: Critical Temp + Shutdown Temp (round 19 #10, T3).
) -> (Option<f64>, Option<f64>, Option<f64>) {
// ePIC summary /Misc: Shutdown Temp (hot) + Critical Temp (dangerous); no
// target threshold reported (round 19 #10, T3).
let d = data.get(&DataField::TemperatureLimits);
let f = |k: &str| {
d.and_then(|v| v.pointer(k))
.and_then(|v| v.as_f64())
.filter(|v| v.is_finite() && *v > 0.0)
};
(f("/Critical Temp"), f("/Shutdown Temp"))
(None, f("/Shutdown Temp"), f("/Critical Temp"))
}
}
@@ -1407,6 +1418,28 @@ impl GetOperatingState for PowerPlayV1 {
.and_then(Value::as_str)
.and_then(OperatingState::from_label)
}
fn parse_tuner_status(&self, data: &HashMap<DataField, Value>) -> Option<String> {
// ePIC PerpetualTune: Running gates it; the per-algorithm Optimized flag
// distinguishes a settled tune from an in-progress one (round 19 #10, T3).
let pt = data.get(&DataField::TunerStatus)?;
if !pt.pointer("/Running").and_then(|v| v.as_bool()).unwrap_or(false) {
return Some("Off".to_string());
}
let optimized = pt
.pointer("/Algorithm")
.and_then(|v| v.as_object())
.and_then(|algos| {
algos
.values()
.filter_map(|a| a.pointer("/Optimized").and_then(|v| v.as_bool()))
.next()
});
Some(match optimized {
Some(true) => "Optimized",
_ => "Tuning",
})
.map(str::to_string)
}
}
impl GetIsMining for PowerPlayV1 {
@@ -2229,9 +2262,13 @@ mod tests {
assert_eq!(miner_data.wattage, Some(Power::from_watts(2166.6174)));
// Miner-level fan duty cycle from summary /Fans/Fans Speed (round 19 #10, T3).
assert_eq!(miner_data.fan_speed_percent, Some(100.0));
// Board temp thresholds from summary /Misc (round 19 #10, T3).
assert_eq!(miner_data.temp_critical, Some(100.0));
assert_eq!(miner_data.temp_shutdown, Some(85.0));
// Board temp thresholds from summary /Misc (round 19 #10, T3): Shutdown->hot,
// Critical->dangerous, no target.
assert_eq!(miner_data.temp_target, None);
assert_eq!(miner_data.temp_hot, Some(85.0));
assert_eq!(miner_data.temp_dangerous, Some(100.0));
// Auto-tuner: PerpetualTune Running=true, Optimized=false -> Tuning (T3).
assert_eq!(miner_data.tuner_status.as_deref(), Some("Tuning"));
assert_eq!(miner_data.hashboards.len(), 3);
assert_eq!(miner_data.hashboards[0].active, Some(false));
assert_eq!(miner_data.hashboards[1].chips.len(), 110);
+1 -1
View File
@@ -1 +1 @@
{"$comment":"This file only protects against accidental modifications. It is not a security mechanism and does not protect against malicious changes.","files":{".cargo_vcs_info.json":"fe8effe2bfdda5d4c390656c016729f531a2b1c60033228557659c0befdde9f2","Cargo.lock":"a2b2cb45bb8b574e4f29ffdcdb5ebafd1dd87a0e6e11b47383973a99be367784","Cargo.toml":"503efa00123f8567f5fe40bf6a93e9e453d13094df0e0e1b7e98bdacdfbd2595","Cargo.toml.orig":"1c4ba0315fb491c086fc22a5c9bafaf7288c6b1fd48679c3d03dbd9df156a8b5","src/backends/mod.rs":"548d988b877410e330a55e275f64b2adad95ca5f1a0f085fe144957c96b8906f","src/backends/v1/mod.rs":"2c04560cd60492adf42bc33549247f70601056a0355aebbf8b5638be881b5627","src/backends/v1/rpc.rs":"25b0b9d56fbf113d5b8c3d3bc8eb7a0d67967b1f90f6d855da0b9f6ff24ae335","src/firmware.rs":"d95345295ae5043dfc357e69ae56c564b261fdb3b19b5c0ad1765267ff05ab3f","src/lib.rs":"53f7acddeff8f7d82f80d09e0a9f91962011f9ccf2e441c4ca05cd7fc4eb292e","src/test/json/mod.rs":"24191681066d5cf6a3022ad59c1baa92b57e3ce7717bb78d6a682af9e19a38c4","src/test/json/v1/config.json":"6ca9e6217d853d4bf1e75d69159630e9c9184ede96751706b88dfb699b5d59ad","src/test/json/v1/devs.json":"8f746dc6a02953eee5ee96dcf53be8dc7880a8ffc2c6e303f0284bcf6a97f42d","src/test/json/v1/events.json":"913683ff97af3333018807e1cc6e43467ea8a55925e5964dc402616615e2a5e3","src/test/json/v1/fans.json":"f8a9a1234d651055c80f4ebb1380bbb4e6d19eb33012902c55fff1385e592447","src/test/json/v1/healthchipget_0.json":"10619460049333ca016b2beec59ecc514ed9077fb19bdf7d0ed697201f8cb96c","src/test/json/v1/healthchipget_1.json":"80927fb1480c95be7f3a4e155d63f68f97720530ff7cf5d5ade06f2a3e810bf0","src/test/json/v1/healthchipget_2.json":"1e93ee2ab472ee7af58add08b4251e3ce0ad4f986d4325abbf43fd4c9b3dd28f","src/test/json/v1/mod.rs":"5a050f07455e622e35ad79ab1c8a6daf2ea38c4198472e49c6bbfe80538a9e48","src/test/json/v1/pools.json":"0068745327e31853fec051172abb7337f18a4cf9972c51967113d63f4f31f504","src/test/json/v1/power.json":"80534bb4581de7c8b747bf33b5d629b909c6e16a531d18ecb4afd7ffad3f014f","src/test/json/v1/profiles.json":"1f00429036e270daa08f12cd2d7357135070c57acd7a899a3c0af6167fe82abb","src/test/json/v1/stats.json":"2b105f0eb927046c9d2389bde978a43e3d54d12a420dfbe400786bb2f0ae31ca","src/test/json/v1/summary.json":"aaea3378eb7040952037e2f1ef7bd5f20a1b242bf93d4ba0501c46104b0b31a0","src/test/json/v1/temps.json":"1ee781cd2be3ed6a6a07e23be930248735fb51348c160453ba10f6ef71fcb7f1","src/test/json/v1/version.json":"4beb6ca5c0ebf359cee0434fdcc4d0a1a0607436634e46be3fd951e2256595df","src/test/json/v1/voltageget_0.json":"c445fa8674c2542b2d296fbafdd3166c53008dfbd9da8095327217989d37f1da","src/test/json/v1/voltageget_1.json":"96b91c3447dd66e7f1f575ed3b99611062e8b1d516d31422b74e425c46b2f49c","src/test/json/v1/voltageget_2.json":"7d40544021b2e32401135ae333067b770d2d736ada9e60deaca8fd8f5a79a1e3","src/test/mod.rs":"ed52c3d613eabc4a0346bb38bcfdf7a94933d61e368d3c9094821edeab92f81b"},"package":"513792d93a2a21d5258d9e6ac0e6dc9e0a6365118934514b4e656792add78066"}
{"$comment":"This file only protects against accidental modifications. It is not a security mechanism and does not protect against malicious changes.","files":{".cargo_vcs_info.json":"fe8effe2bfdda5d4c390656c016729f531a2b1c60033228557659c0befdde9f2","Cargo.lock":"a2b2cb45bb8b574e4f29ffdcdb5ebafd1dd87a0e6e11b47383973a99be367784","Cargo.toml":"503efa00123f8567f5fe40bf6a93e9e453d13094df0e0e1b7e98bdacdfbd2595","Cargo.toml.orig":"1c4ba0315fb491c086fc22a5c9bafaf7288c6b1fd48679c3d03dbd9df156a8b5","src/backends/mod.rs":"548d988b877410e330a55e275f64b2adad95ca5f1a0f085fe144957c96b8906f","src/backends/v1/mod.rs":"a66ca11f7ab20d83d17ef0b6106810524902e0650ac770144f3998e597dd0541","src/backends/v1/rpc.rs":"25b0b9d56fbf113d5b8c3d3bc8eb7a0d67967b1f90f6d855da0b9f6ff24ae335","src/firmware.rs":"d95345295ae5043dfc357e69ae56c564b261fdb3b19b5c0ad1765267ff05ab3f","src/lib.rs":"53f7acddeff8f7d82f80d09e0a9f91962011f9ccf2e441c4ca05cd7fc4eb292e","src/test/json/mod.rs":"24191681066d5cf6a3022ad59c1baa92b57e3ce7717bb78d6a682af9e19a38c4","src/test/json/v1/config.json":"6ca9e6217d853d4bf1e75d69159630e9c9184ede96751706b88dfb699b5d59ad","src/test/json/v1/devs.json":"8f746dc6a02953eee5ee96dcf53be8dc7880a8ffc2c6e303f0284bcf6a97f42d","src/test/json/v1/events.json":"913683ff97af3333018807e1cc6e43467ea8a55925e5964dc402616615e2a5e3","src/test/json/v1/fans.json":"f8a9a1234d651055c80f4ebb1380bbb4e6d19eb33012902c55fff1385e592447","src/test/json/v1/healthchipget_0.json":"10619460049333ca016b2beec59ecc514ed9077fb19bdf7d0ed697201f8cb96c","src/test/json/v1/healthchipget_1.json":"80927fb1480c95be7f3a4e155d63f68f97720530ff7cf5d5ade06f2a3e810bf0","src/test/json/v1/healthchipget_2.json":"1e93ee2ab472ee7af58add08b4251e3ce0ad4f986d4325abbf43fd4c9b3dd28f","src/test/json/v1/mod.rs":"e8d449dbe57fd97fa70908673438c069a050548e800b6e9762c5a622bd7acc6d","src/test/json/v1/pools.json":"0068745327e31853fec051172abb7337f18a4cf9972c51967113d63f4f31f504","src/test/json/v1/power.json":"80534bb4581de7c8b747bf33b5d629b909c6e16a531d18ecb4afd7ffad3f014f","src/test/json/v1/profiles.json":"1f00429036e270daa08f12cd2d7357135070c57acd7a899a3c0af6167fe82abb","src/test/json/v1/stats.json":"2b105f0eb927046c9d2389bde978a43e3d54d12a420dfbe400786bb2f0ae31ca","src/test/json/v1/summary.json":"aaea3378eb7040952037e2f1ef7bd5f20a1b242bf93d4ba0501c46104b0b31a0","src/test/json/v1/temps.json":"1ee781cd2be3ed6a6a07e23be930248735fb51348c160453ba10f6ef71fcb7f1","src/test/json/v1/version.json":"4beb6ca5c0ebf359cee0434fdcc4d0a1a0607436634e46be3fd951e2256595df","src/test/json/v1/voltageget_0.json":"c445fa8674c2542b2d296fbafdd3166c53008dfbd9da8095327217989d37f1da","src/test/json/v1/voltageget_1.json":"96b91c3447dd66e7f1f575ed3b99611062e8b1d516d31422b74e425c46b2f49c","src/test/json/v1/voltageget_2.json":"7d40544021b2e32401135ae333067b770d2d736ada9e60deaca8fd8f5a79a1e3","src/test/mod.rs":"ed52c3d613eabc4a0346bb38bcfdf7a94933d61e368d3c9094821edeab92f81b"},"package":"513792d93a2a21d5258d9e6ac0e6dc9e0a6365118934514b4e656792add78066"}
+42 -1
View File
@@ -278,6 +278,11 @@ impl GetDataLocations for LuxMinerV1 {
parameters: None,
};
const RPC_TEMPCTRL: MinerCommand = MinerCommand::RPC {
command: "tempctrl",
parameters: None,
};
match data_field {
DataField::Mac => vec![(
RPC_CONFIG,
@@ -305,6 +310,16 @@ impl GetDataLocations for LuxMinerV1 {
tag: None,
},
)],
// Board temp thresholds (round 19 #10, T3): LuxOS tempctrl reports
// ChipTarget / ChipHot / ChipDangerous.
DataField::TemperatureLimits => vec![(
RPC_TEMPCTRL,
DataExtractor {
func: get_by_pointer,
key: Some("/TEMPCTRL/0"),
tag: None,
},
)],
DataField::ApiVersion => vec![(
RPC_VERSION,
DataExtractor {
@@ -690,6 +705,20 @@ impl GetFluidTemperature for LuxMinerV1 {
(None, None) => None,
}
}
fn parse_temperature_limits(
&self,
data: &HashMap<DataField, Value>,
) -> (Option<f64>, Option<f64>, Option<f64>) {
// LuxOS tempctrl chip thresholds ChipTarget / ChipHot / ChipDangerous
// (round 19 #10, T3).
let d = data.get(&DataField::TemperatureLimits);
let f = |k: &str| {
d.and_then(|v| v.get(k))
.and_then(|v| v.as_f64())
.filter(|v| v.is_finite() && *v > 0.0)
};
(f("ChipTarget"), f("ChipHot"), f("ChipDangerous"))
}
}
impl GetFirmwareVersion for LuxMinerV1 {
@@ -1465,7 +1494,8 @@ mod tests {
use super::*;
use crate::test::json::v1::{
CONFIG, DEVS, EVENTS, FANS, HEALTHCHIPGET_0, HEALTHCHIPGET_1, HEALTHCHIPGET_2, POOLS,
POWER, PROFILES, STATS, SUMMARY, TEMPS, VERSION, VOLTAGEGET_0, VOLTAGEGET_1, VOLTAGEGET_2,
POWER, PROFILES, STATS, SUMMARY, TEMPCTRL, TEMPS, VERSION, VOLTAGEGET_0, VOLTAGEGET_1,
VOLTAGEGET_2,
};
#[test]
@@ -1582,6 +1612,11 @@ mod tests {
parameters: None,
};
let tempctrl_cmd = MinerCommand::RPC {
command: "tempctrl",
parameters: None,
};
results.insert(version_cmd, Value::from_str(VERSION)?);
results.insert(stats_cmd, Value::from_str(STATS)?);
results.insert(summary_cmd, Value::from_str(SUMMARY)?);
@@ -1591,6 +1626,7 @@ mod tests {
results.insert(power_cmd, Value::from_str(POWER)?);
results.insert(profiles_cmd, Value::from_str(PROFILES)?);
results.insert(temps_cmd, Value::from_str(TEMPS)?);
results.insert(tempctrl_cmd, Value::from_str(TEMPCTRL)?);
results.insert(devs_cmd, Value::from_str(DEVS)?);
results.insert(
MinerCommand::RPC {
@@ -1704,6 +1740,11 @@ mod tests {
// Miner-level fan duty cycle = max of per-fan Speed (all 20 here); round 19
// #10, T3.
assert_eq!(miner_data.fan_speed_percent, Some(20.0));
// Board temp thresholds from tempctrl ChipTarget/ChipHot/ChipDangerous
// (round 19 #10, T3).
assert_eq!(miner_data.temp_target, Some(83.0));
assert_eq!(miner_data.temp_hot, Some(93.0));
assert_eq!(miner_data.temp_dangerous, Some(100.0));
assert_eq!(miner_data.hashboards[0].chips.len(), 77);
assert_eq!(miner_data.pools.len(), 2);
assert_eq!(miner_data.pools[0].len(), 2);
@@ -10,6 +10,7 @@ pub(crate) const PROFILES: &str = include_str!("profiles.json");
pub(crate) const STATS: &str = include_str!("stats.json");
pub(crate) const SUMMARY: &str = include_str!("summary.json");
pub(crate) const TEMPS: &str = include_str!("temps.json");
pub(crate) const TEMPCTRL: &str = include_str!("tempctrl.json");
pub(crate) const VERSION: &str = include_str!("version.json");
pub(crate) const EVENTS: &str = include_str!("events.json");
@@ -0,0 +1,26 @@
{
"STATUS": [
{
"Code": 200,
"Description": "LUXminer 2026.9.21.003141-c8f244146",
"Msg": "Temperature control",
"STATUS": "S",
"When": 1790206067
}
],
"TEMPCTRL": [
{
"ChipDangerous": 100.0,
"ChipHot": 93.0,
"ChipTarget": 83.0,
"Dangerous": 70.0,
"Hot": 65.0,
"Mode": "Automatic",
"Target": 45.0,
"WaterInletDangerous": 50.0,
"WaterInletHot": 49.0,
"WaterInletStartup": 15.0
}
],
"id": 1
}
+1 -1
View File
@@ -1 +1 @@
{"$comment":"This file only protects against accidental modifications. It is not a security mechanism and does not protect against malicious changes.","files":{".cargo_vcs_info.json":"de321c89f62a60690ba07d6bb145ac688c6141c458638e68b3ed36b50b8de1f1","Cargo.lock":"5942ec7c9cf5c201bd32442d65020dc3ae72e33cb5aaf374b2a26501571a1487","Cargo.toml":"cb9ee00cbb415fa66a71a7d4822839bb3552336ec9ab975ae7b1137c711449cb","Cargo.toml.orig":"08409c395e4d502015da62e97efdc9c5bc6e3076031144f3f5aa35c900c7c735","src/backends/mod.rs":"26591e67688f8d015242295dde5050c4b34986e9980018a855346291a0472206","src/backends/v1_2_0/mod.rs":"fc68a12769890e18231255c6a53cb2c68e4706a887d91f49113c6192684340d2","src/backends/v1_2_0/web.rs":"ac89f16bf623f7d85590d34b45c99b0e522d9d434b4c22af7fa8a8a653e09d2e","src/backends/v1_3_0/mod.rs":"0bba1bf94e7a86d763dbedda3bb5d68cf760e17f744204b0bbc0de4e3754f795","src/backends/v1_3_0/web.rs":"1ec4cbe6bdc26f165d9e54e9bf2aac4c3706357ce4677dc21113710d4a26c3c1","src/firmware.rs":"168eeffaef90cb1525bb2e126e73905b5205d49215437263813e30323f6b7a05","src/lib.rs":"16ea1c0007fa6d6c86c1f83d3ac9cdf065cd9936cd52f35ef89c227397bbc54a","src/timezone.rs":"309bf23de1bdc9126bde5db8dabff0d2c0fea797dbf2630a772a18539838a05e"},"package":"1cb662e56f104c0fe45c8ccdac13f60cbcaad45ac228f939c6ac46ff40335052"}
{"$comment":"This file only protects against accidental modifications. It is not a security mechanism and does not protect against malicious changes.","files":{".cargo_vcs_info.json":"de321c89f62a60690ba07d6bb145ac688c6141c458638e68b3ed36b50b8de1f1","Cargo.lock":"5942ec7c9cf5c201bd32442d65020dc3ae72e33cb5aaf374b2a26501571a1487","Cargo.toml":"cb9ee00cbb415fa66a71a7d4822839bb3552336ec9ab975ae7b1137c711449cb","Cargo.toml.orig":"08409c395e4d502015da62e97efdc9c5bc6e3076031144f3f5aa35c900c7c735","src/backends/mod.rs":"26591e67688f8d015242295dde5050c4b34986e9980018a855346291a0472206","src/backends/v1_2_0/mod.rs":"1634197592d962894e330b65a808518734aa26af57f182ea64dca59e3e9eb58b","src/backends/v1_2_0/web.rs":"ac89f16bf623f7d85590d34b45c99b0e522d9d434b4c22af7fa8a8a653e09d2e","src/backends/v1_3_0/mod.rs":"ab0a02f3fe1e6400f07f2bd148cb05e027cfc1e5b1fbfe6f2f01a1dddf78bb51","src/backends/v1_3_0/web.rs":"1ec4cbe6bdc26f165d9e54e9bf2aac4c3706357ce4677dc21113710d4a26c3c1","src/firmware.rs":"168eeffaef90cb1525bb2e126e73905b5205d49215437263813e30323f6b7a05","src/lib.rs":"16ea1c0007fa6d6c86c1f83d3ac9cdf065cd9936cd52f35ef89c227397bbc54a","src/timezone.rs":"309bf23de1bdc9126bde5db8dabff0d2c0fea797dbf2630a772a18539838a05e"},"package":"1cb662e56f104c0fe45c8ccdac13f60cbcaad45ac228f939c6ac46ff40335052"}
+133 -11
View File
@@ -20,7 +20,7 @@ use asic_rs_core::{
device::DeviceInfo,
fan::FanData,
hashrate::{HashRate, HashRateUnit},
message::{MessageSeverity, MinerMessage},
message::{MessageSeverity, MinerComponent, MinerMessage},
miner::TuningTarget,
operating_state::OperatingState,
pool::{PoolData, PoolGroupData, PoolURL},
@@ -353,14 +353,26 @@ impl GetDataLocations for VnishV120 {
tag: None,
},
)],
DataField::Messages => vec![(
WEB_SUMMARY,
DataExtractor {
func: get_by_pointer,
key: Some("/miner/miner_status"),
tag: None,
},
)],
DataField::Messages => vec![
(
WEB_SUMMARY,
DataExtractor {
func: get_by_pointer,
key: Some("/miner/miner_status"),
tag: Some("miner_status"),
},
),
// Per-hashboard diagnostics (chip status buckets + per-chain state)
// for per-board fault messages in parse_messages.
(
WEB_SUMMARY,
DataExtractor {
func: get_by_pointer,
key: Some("/miner/chains"),
tag: Some("chains"),
},
),
],
DataField::TuningTarget => vec![(
WEB_SETTINGS,
DataExtractor {
@@ -369,6 +381,25 @@ impl GetDataLocations for VnishV120 {
tag: None,
},
)],
// Miner-level fan duty cycle (round 19 #10, T3); summary already fetched.
DataField::FanSpeedPercent => vec![(
WEB_SUMMARY,
DataExtractor {
func: get_by_pointer,
key: Some("/miner/cooling/fan_duty"),
tag: None,
},
)],
// Board temp thresholds (round 19 #10, T3): settings restart_temp
// (dangerous) + auto cooling target. Settings already fetched.
DataField::TemperatureLimits => vec![(
WEB_SETTINGS,
DataExtractor {
func: get_by_pointer,
key: Some("/miner"),
tag: None,
},
)],
_ => vec![],
}
}
@@ -678,6 +709,12 @@ impl GetFans for VnishV120 {
fans
}
fn parse_fan_speed_percent(&self, data: &HashMap<DataField, Value>) -> Option<f64> {
// VNish summary /miner/cooling/fan_duty is a miner-level duty % (round 19 #10).
data.get(&DataField::FanSpeedPercent)
.and_then(|v| v.as_f64())
.filter(|v| v.is_finite() && *v >= 0.0)
}
}
impl GetPsuFans for VnishV120 {}
@@ -766,6 +803,26 @@ impl GetFluidTemperature for VnishV120 {
.max()
.map(|t| Temperature::from_celsius(t as f64))
}
fn parse_temperature_limits(
&self,
data: &HashMap<DataField, Value>,
) -> (Option<f64>, Option<f64>, Option<f64>) {
// VNish settings: restart_temp is the dangerous threshold; the auto cooling
// mode "param" is the target temperature. No hot threshold (round 19 #10, T3).
let m = data.get(&DataField::TemperatureLimits);
let dangerous = m
.and_then(|v| v.pointer("/misc/restart_temp"))
.and_then(|v| v.as_f64())
.filter(|v| v.is_finite() && *v > 0.0);
let target = m
.filter(|v| {
v.pointer("/cooling/settings/mode/name").and_then(|n| n.as_str()) == Some("auto")
})
.and_then(|v| v.pointer("/cooling/settings/mode/param"))
.and_then(|v| v.as_f64())
.filter(|v| v.is_finite() && *v > 0.0);
(target, None, dangerous)
}
}
impl GetWattage for VnishV120 {
@@ -805,9 +862,12 @@ impl GetMessages for VnishV120 {
/// reported here rather than computed from invented thresholds.
fn parse_messages(&self, data: &HashMap<DataField, Value>) -> Vec<MinerMessage> {
let mut messages = Vec::new();
let msg = data.get(&DataField::Messages);
if let Some(status) = data.get(&DataField::Messages)
&& let Some(state) = status.pointer("/miner_state").and_then(|v| v.as_str())
// Miner-level state verdict (now under the "miner_status" tag).
if let Some(state) = msg
.and_then(|v| v.pointer("/miner_status/miner_state"))
.and_then(|v| v.as_str())
{
let normal = matches!(
state.to_lowercase().as_str(),
@@ -827,6 +887,68 @@ impl GetMessages for VnishV120 {
}
}
// Per-hashboard faults from the summary chains (round 20 #1). VNish reports
// per-chip status buckets (`red` = failed, `orange` = degraded, `grey` =
// healthy) and a per-chain state; attribute each fault to its own board so
// the Health column reds the right hashboard icon and that icon's tooltip
// carries the specific fault, instead of everything landing on the miner-
// level (brain) message. Chain ids are 1-based; board positions are 0-based.
if let Some(chains) = msg
.and_then(|v| v.pointer("/chains"))
.and_then(|v| v.as_array())
{
for chain in chains {
let Some(id) = chain.pointer("/id").and_then(|v| v.as_u64()) else {
continue;
};
let idx = id.saturating_sub(1) as u16;
let red = chain
.pointer("/chip_statuses/red")
.and_then(|v| v.as_u64())
.unwrap_or(0);
let orange = chain
.pointer("/chip_statuses/orange")
.and_then(|v| v.as_u64())
.unwrap_or(0);
let state = chain
.pointer("/status/state")
.and_then(|v| v.as_str())
.unwrap_or("");
let state_ok = matches!(
state.to_lowercase().as_str(),
"" | "mining" | "auto-tuning" | "auto_tuning" | "tuning"
);
if red > 0 {
messages.push(MinerMessage::with_component(
0,
0,
format!("Hashboard {id}: {red} failed chip(s)"),
MessageSeverity::Error,
Some(MinerComponent::hashboard(idx)),
));
} else if !state_ok {
// A board not in a normal state but with no failed chips: report
// the state itself (e.g. "initializing", "disabled", "stopped").
messages.push(MinerMessage::with_component(
0,
0,
format!("Hashboard {id}: {state}"),
MessageSeverity::Error,
Some(MinerComponent::hashboard(idx)),
));
} else if orange > 0 {
messages.push(MinerMessage::with_component(
0,
0,
format!("Hashboard {id}: {orange} degraded chip(s)"),
MessageSeverity::Warning,
Some(MinerComponent::hashboard(idx)),
));
}
}
}
messages
}
}
+156 -11
View File
@@ -20,7 +20,7 @@ use asic_rs_core::{
device::DeviceInfo,
fan::FanData,
hashrate::{HashRate, HashRateUnit},
message::{MessageSeverity, MinerMessage},
message::{MessageSeverity, MinerComponent, MinerMessage},
miner::TuningTarget,
operating_state::OperatingState,
pool::{PoolData, PoolGroupData, PoolURL},
@@ -351,14 +351,26 @@ impl GetDataLocations for VnishV130 {
tag: None,
},
)],
DataField::Messages => vec![(
WEB_SUMMARY,
DataExtractor {
func: get_by_pointer,
key: Some("/miner/miner_status"),
tag: None,
},
)],
DataField::Messages => vec![
(
WEB_SUMMARY,
DataExtractor {
func: get_by_pointer,
key: Some("/miner/miner_status"),
tag: Some("miner_status"),
},
),
// Per-hashboard diagnostics (chip status buckets + per-chain state)
// for per-board fault messages in parse_messages.
(
WEB_SUMMARY,
DataExtractor {
func: get_by_pointer,
key: Some("/miner/chains"),
tag: Some("chains"),
},
),
],
DataField::TuningPercent => vec![(
WEB_SUMMARY,
DataExtractor {
@@ -375,6 +387,26 @@ impl GetDataLocations for VnishV130 {
tag: None,
},
)],
// Miner-level fan duty cycle (round 19 #10, T3); summary already fetched.
DataField::FanSpeedPercent => vec![(
WEB_SUMMARY,
DataExtractor {
func: get_by_pointer,
key: Some("/miner/cooling/fan_duty"),
tag: None,
},
)],
// Board temp thresholds (round 19 #10, T3): settings /miner/misc/restart_temp
// (dangerous) + auto cooling target (/miner/cooling/settings/mode/param).
// Settings already fetched for the tuning preset.
DataField::TemperatureLimits => vec![(
WEB_SETTINGS,
DataExtractor {
func: get_by_pointer,
key: Some("/miner"),
tag: None,
},
)],
_ => vec![],
}
}
@@ -683,6 +715,12 @@ impl GetFans for VnishV130 {
fans
}
fn parse_fan_speed_percent(&self, data: &HashMap<DataField, Value>) -> Option<f64> {
// VNish summary /miner/cooling/fan_duty is a miner-level duty % (round 19 #10).
data.get(&DataField::FanSpeedPercent)
.and_then(|v| v.as_f64())
.filter(|v| v.is_finite() && *v >= 0.0)
}
}
impl GetPsuFans for VnishV130 {}
@@ -716,6 +754,26 @@ impl GetFluidTemperature for VnishV130 {
.max()
.map(|t| Temperature::from_celsius(t as f64))
}
fn parse_temperature_limits(
&self,
data: &HashMap<DataField, Value>,
) -> (Option<f64>, Option<f64>, Option<f64>) {
// VNish settings: restart_temp is the dangerous threshold; the auto cooling
// mode "param" is the target temperature. No hot threshold (round 19 #10, T3).
let m = data.get(&DataField::TemperatureLimits);
let dangerous = m
.and_then(|v| v.pointer("/misc/restart_temp"))
.and_then(|v| v.as_f64())
.filter(|v| v.is_finite() && *v > 0.0);
let target = m
.filter(|v| {
v.pointer("/cooling/settings/mode/name").and_then(|n| n.as_str()) == Some("auto")
})
.and_then(|v| v.pointer("/cooling/settings/mode/param"))
.and_then(|v| v.as_f64())
.filter(|v| v.is_finite() && *v > 0.0);
(target, None, dangerous)
}
}
impl GetWattage for VnishV130 {
@@ -759,9 +817,12 @@ impl GetMessages for VnishV130 {
/// reported here rather than computed from invented thresholds.
fn parse_messages(&self, data: &HashMap<DataField, Value>) -> Vec<MinerMessage> {
let mut messages = Vec::new();
let msg = data.get(&DataField::Messages);
if let Some(status) = data.get(&DataField::Messages)
&& let Some(state) = status.pointer("/miner_state").and_then(|v| v.as_str())
// Miner-level state verdict (now under the "miner_status" tag).
if let Some(state) = msg
.and_then(|v| v.pointer("/miner_status/miner_state"))
.and_then(|v| v.as_str())
{
let normal = matches!(
state.to_lowercase().as_str(),
@@ -781,6 +842,68 @@ impl GetMessages for VnishV130 {
}
}
// Per-hashboard faults from the summary chains (round 20 #1). VNish reports
// per-chip status buckets (`red` = failed, `orange` = degraded, `grey` =
// healthy) and a per-chain state; attribute each fault to its own board so
// the Health column reds the right hashboard icon and that icon's tooltip
// carries the specific fault, instead of everything landing on the miner-
// level (brain) message. Chain ids are 1-based; board positions are 0-based.
if let Some(chains) = msg
.and_then(|v| v.pointer("/chains"))
.and_then(|v| v.as_array())
{
for chain in chains {
let Some(id) = chain.pointer("/id").and_then(|v| v.as_u64()) else {
continue;
};
let idx = id.saturating_sub(1) as u16;
let red = chain
.pointer("/chip_statuses/red")
.and_then(|v| v.as_u64())
.unwrap_or(0);
let orange = chain
.pointer("/chip_statuses/orange")
.and_then(|v| v.as_u64())
.unwrap_or(0);
let state = chain
.pointer("/status/state")
.and_then(|v| v.as_str())
.unwrap_or("");
let state_ok = matches!(
state.to_lowercase().as_str(),
"" | "mining" | "auto-tuning" | "auto_tuning" | "tuning"
);
if red > 0 {
messages.push(MinerMessage::with_component(
0,
0,
format!("Hashboard {id}: {red} failed chip(s)"),
MessageSeverity::Error,
Some(MinerComponent::hashboard(idx)),
));
} else if !state_ok {
// A board not in a normal state but with no failed chips: report
// the state itself (e.g. "initializing", "disabled", "stopped").
messages.push(MinerMessage::with_component(
0,
0,
format!("Hashboard {id}: {state}"),
MessageSeverity::Error,
Some(MinerComponent::hashboard(idx)),
));
} else if orange > 0 {
messages.push(MinerMessage::with_component(
0,
0,
format!("Hashboard {id}: {orange} degraded chip(s)"),
MessageSeverity::Warning,
Some(MinerComponent::hashboard(idx)),
));
}
}
}
messages
}
}
@@ -1354,6 +1477,28 @@ mod tests {
);
}
/// Fan duty cycle (summary /miner/cooling/fan_duty) and board temp thresholds
/// (settings restart_temp -> dangerous, auto cooling param -> target); round 19
/// #10, T3. Values match the live 10.4.1.50 fleet unit.
#[test]
fn fan_duty_and_temp_thresholds() {
let miner = VnishV130::new(IpAddr::from([127, 0, 0, 1]), AntMinerModel::S19jPro);
let mut data: HashMap<DataField, Value> = HashMap::new();
data.insert(DataField::FanSpeedPercent, json!(81));
data.insert(
DataField::TemperatureLimits,
json!({
"misc": { "restart_temp": 90 },
"cooling": { "settings": { "mode": { "name": "auto", "param": 65 } } }
}),
);
assert_eq!(miner.parse_fan_speed_percent(&data), Some(81.0));
assert_eq!(
miner.parse_temperature_limits(&data),
(Some(65.0), None, Some(90.0))
);
}
/// An L9 is a Scrypt miner and VNish says so in `/info`, both in
/// `algorithm` and by reporting `hr_measure: MH/s`. Before this was wired
/// up it came back as a SHA-256 miner and every figure was read as GH/s,
+1 -1
View File
@@ -1 +1 @@
{"$comment":"This file only protects against accidental modifications. It is not a security mechanism and does not protect against malicious changes.","files":{".cargo_vcs_info.json":"30f09ad063df45fdf223aff235fe2da15cb1a7e79e86d7012074153b91662fc4","Cargo.lock":"9d0886791db53421d3218ab72d964145b86cfbe9738eaf09aac5d3c89a1c0190","Cargo.toml":"8c2e9938436850f2e250e8268ed7b385fce903e2077923b207a0560ca3e3242c","Cargo.toml.orig":"891fcfa45e79d6bc4d838c4f3075618f791bd013c99231da48e752b987f409d5","src/backends/mod.rs":"0f5a0ae31d5443d0d0f41a2540def806196238c92d22761b3ad9843cb2e77f45","src/backends/v1/mod.rs":"2622d7b51dab7f749d20fc04dda371320271b8078fed0c352515becc7daebc47","src/backends/v1/rpc.rs":"72f9b67c2389ab6e9968e0eb340bd2b6aad9aaf059f4429eb31398863bb87f42","src/backends/v2/mod.rs":"9bab68108a178f6a1e2c32481c94e0dcd38c3123e633bf89773b62a9c529290b","src/backends/v2/rpc.rs":"52f8d504c236009b020bf33b5550236e36d07b2c73a15bdcfcafa5188e4e1cb6","src/backends/v3/mod.rs":"2cf0311d1dba5d175ad7501917e7b9b3abdc3f1f5ef8993d9d3f453cecd3c09f","src/backends/v3/rpc.rs":"7a5f80aec4af1bcaa0d36e67345aa9acbbd8ead73c0be474f06305358b38e81b","src/error_codes.rs":"b2af610880fb400a9e6297662371a6b3b55077b72cf11115b77fd4d2df44e6a1","src/firmware.rs":"6d002e481ce0a897c0485b9393b0382fcb25811164e893eb8eb67b2ff392ca0d","src/lib.rs":"710b46c9d934f26f900e1366ca1df5f872896e7d8da03569c0f159859e899cc9","src/test/json/mod.rs":"99760925ccfefc40d2455d3567fb1ecfc99e9e55e70478190ef372a954825909","src/test/json/v1/devs.json":"b4fd010f0bae3584efde93387cf2dab5933b499cc30a2dd7635fdc994b56c3b8","src/test/json/v1/get_psu.json":"8c11b6495e0bd5da496dd5c10ca53ec53b2d8fe9a3737f470ec9ce2c1aaf9d99","src/test/json/v1/get_version.json":"c43e947e654792ab191210d50c6f793ee0dd7af41e8cb59f0722b70f32a203bc","src/test/json/v1/mod.rs":"a12ec375a02238d5e26b64e2f7aeb0fc336747d86ae012dc154265ee5afaabbf","src/test/json/v1/pools.json":"b570808a3428a0773d7d2ee322150d8fd0794a33804af970300a7fef128a8a01","src/test/json/v1/status.json":"00ec38dd9f980b7ac0ffd6f815374afdbbed98d601bd8ef18bcf0f76ae0aa853","src/test/json/v1/summary.json":"d6e3e75654eb4019e1f479b3d9cf3097130f1afb85dd3338682c094fd4ab498a","src/test/json/v1/summary_with_errors.json":"1ba682f6ad5c43e41ae22a4069d0f52f04da3f07a18031bf4c07e07b3c59cc97","src/test/json/v2/devs.json":"2d203e41ef6ef337c0c81456b73d08730882c3167403c557c3c9776022a972d1","src/test/json/v2/get_error_code.json":"e90b702fd97bceb4f62dcb8228f75ff5ce930290355dca94eefd7192f7f57009","src/test/json/v2/get_error_code_with_errors.json":"6cb6038366eb3835684421c41be0b2b30ae8ce79a7ed51a85f4f52f70da9df16","src/test/json/v2/get_miner_info.json":"55d2af984833a692f502188ae4df4e41bdc10386b47f921c896a452ef1de9062","src/test/json/v2/get_psu.json":"b43086b65897061521d1f6611e200ef372a1724f9ea1876e347c03d5fb19b8f2","src/test/json/v2/get_version.json":"b17e3a81603b43186b2e15745e6822b6c82b3c6f5928b22f84e683d7728dbfcd","src/test/json/v2/mod.rs":"c847205d076323bbd9698e393d241b08f3cf75d32aae86f7058cf8748266b935","src/test/json/v2/pools.json":"926d34e8dae774473ebfec83d4a38e77ca73231708f07683763e212be7af0580","src/test/json/v2/status.json":"fc268cd23864ef99e84813dbf8eb916b2e6f339351a0ee5dab217cbe02569fc3","src/test/json/v2/summary.json":"4e4c01b986e2960893f58d0f1ea4dce23b8ef88db4985348f7f0183eb4818478","src/test/json/v3/get_device_info.json":"83ac22ea9a11adbceb4c963db80aa62d9a2aa50d019a372394dece817d924cda","src/test/json/v3/get_device_info_with_errors.json":"24cee4b7840e87e12147cbfddf6c361f3b378a15bb85330b339d3be9e17cdbd5","src/test/json/v3/get_miner_status_edevs.json":"2d831c06113f555e0988df994c2e602a053a4aea603dded0db8f0f80e191ca5a","src/test/json/v3/get_miner_status_pools.json":"cd65c2efd3a5ce80b57aae46c420298a34ca06df7ac7f8c36fd556217703d242","src/test/json/v3/get_miner_status_summary.json":"799a94ba13ef54aed0f81a3d041d6c1fa263d4183754b384c69ca12d85a8d3ba","src/test/json/v3/mod.rs":"7ea3a8ff1b81c7a5b0f44f7c12dda880a9aeac5b0e6b56ac4fff4f4a7cbfe451","src/test/mod.rs":"ed52c3d613eabc4a0346bb38bcfdf7a94933d61e368d3c9094821edeab92f81b"},"package":"c85da6325b62f061327dc5f7605dd3721c823a9e8a2cfd6a356363dfbc84d66e"}
{"$comment":"This file only protects against accidental modifications. It is not a security mechanism and does not protect against malicious changes.","files":{".cargo_vcs_info.json":"30f09ad063df45fdf223aff235fe2da15cb1a7e79e86d7012074153b91662fc4","Cargo.lock":"9d0886791db53421d3218ab72d964145b86cfbe9738eaf09aac5d3c89a1c0190","Cargo.toml":"8c2e9938436850f2e250e8268ed7b385fce903e2077923b207a0560ca3e3242c","Cargo.toml.orig":"891fcfa45e79d6bc4d838c4f3075618f791bd013c99231da48e752b987f409d5","src/backends/mod.rs":"0f5a0ae31d5443d0d0f41a2540def806196238c92d22761b3ad9843cb2e77f45","src/backends/v1/mod.rs":"2b1532bad5a75f90bb6556c9856ccb13522935779678eb764dd6de546ee0999d","src/backends/v1/rpc.rs":"72f9b67c2389ab6e9968e0eb340bd2b6aad9aaf059f4429eb31398863bb87f42","src/backends/v2/mod.rs":"b490e6ae2438b798c866800345e25ae1689f0d43237a9c165a2cca9bbe567c40","src/backends/v2/rpc.rs":"52f8d504c236009b020bf33b5550236e36d07b2c73a15bdcfcafa5188e4e1cb6","src/backends/v3/mod.rs":"fe308cc4944a5abbb578a3c87c1538ba189d25fdaae4c06faeb151a3cb5aedc7","src/backends/v3/rpc.rs":"7a5f80aec4af1bcaa0d36e67345aa9acbbd8ead73c0be474f06305358b38e81b","src/error_codes.rs":"b2af610880fb400a9e6297662371a6b3b55077b72cf11115b77fd4d2df44e6a1","src/firmware.rs":"6d002e481ce0a897c0485b9393b0382fcb25811164e893eb8eb67b2ff392ca0d","src/lib.rs":"710b46c9d934f26f900e1366ca1df5f872896e7d8da03569c0f159859e899cc9","src/test/json/mod.rs":"99760925ccfefc40d2455d3567fb1ecfc99e9e55e70478190ef372a954825909","src/test/json/v1/devs.json":"b4fd010f0bae3584efde93387cf2dab5933b499cc30a2dd7635fdc994b56c3b8","src/test/json/v1/get_psu.json":"8c11b6495e0bd5da496dd5c10ca53ec53b2d8fe9a3737f470ec9ce2c1aaf9d99","src/test/json/v1/get_version.json":"c43e947e654792ab191210d50c6f793ee0dd7af41e8cb59f0722b70f32a203bc","src/test/json/v1/mod.rs":"a12ec375a02238d5e26b64e2f7aeb0fc336747d86ae012dc154265ee5afaabbf","src/test/json/v1/pools.json":"b570808a3428a0773d7d2ee322150d8fd0794a33804af970300a7fef128a8a01","src/test/json/v1/status.json":"00ec38dd9f980b7ac0ffd6f815374afdbbed98d601bd8ef18bcf0f76ae0aa853","src/test/json/v1/summary.json":"d6e3e75654eb4019e1f479b3d9cf3097130f1afb85dd3338682c094fd4ab498a","src/test/json/v1/summary_with_errors.json":"1ba682f6ad5c43e41ae22a4069d0f52f04da3f07a18031bf4c07e07b3c59cc97","src/test/json/v2/devs.json":"2d203e41ef6ef337c0c81456b73d08730882c3167403c557c3c9776022a972d1","src/test/json/v2/get_error_code.json":"e90b702fd97bceb4f62dcb8228f75ff5ce930290355dca94eefd7192f7f57009","src/test/json/v2/get_error_code_with_errors.json":"6cb6038366eb3835684421c41be0b2b30ae8ce79a7ed51a85f4f52f70da9df16","src/test/json/v2/get_miner_info.json":"55d2af984833a692f502188ae4df4e41bdc10386b47f921c896a452ef1de9062","src/test/json/v2/get_psu.json":"b43086b65897061521d1f6611e200ef372a1724f9ea1876e347c03d5fb19b8f2","src/test/json/v2/get_version.json":"b17e3a81603b43186b2e15745e6822b6c82b3c6f5928b22f84e683d7728dbfcd","src/test/json/v2/mod.rs":"c847205d076323bbd9698e393d241b08f3cf75d32aae86f7058cf8748266b935","src/test/json/v2/pools.json":"926d34e8dae774473ebfec83d4a38e77ca73231708f07683763e212be7af0580","src/test/json/v2/status.json":"fc268cd23864ef99e84813dbf8eb916b2e6f339351a0ee5dab217cbe02569fc3","src/test/json/v2/summary.json":"4e4c01b986e2960893f58d0f1ea4dce23b8ef88db4985348f7f0183eb4818478","src/test/json/v3/get_device_info.json":"83ac22ea9a11adbceb4c963db80aa62d9a2aa50d019a372394dece817d924cda","src/test/json/v3/get_device_info_with_errors.json":"24cee4b7840e87e12147cbfddf6c361f3b378a15bb85330b339d3be9e17cdbd5","src/test/json/v3/get_miner_status_edevs.json":"2d831c06113f555e0988df994c2e602a053a4aea603dded0db8f0f80e191ca5a","src/test/json/v3/get_miner_status_pools.json":"cd65c2efd3a5ce80b57aae46c420298a34ca06df7ac7f8c36fd556217703d242","src/test/json/v3/get_miner_status_summary.json":"799a94ba13ef54aed0f81a3d041d6c1fa263d4183754b384c69ca12d85a8d3ba","src/test/json/v3/mod.rs":"7ea3a8ff1b81c7a5b0f44f7c12dda880a9aeac5b0e6b56ac4fff4f4a7cbfe451","src/test/mod.rs":"ed52c3d613eabc4a0346bb38bcfdf7a94933d61e368d3c9094821edeab92f81b"},"package":"c85da6325b62f061327dc5f7605dd3721c823a9e8a2cfd6a356363dfbc84d66e"}
+40 -8
View File
@@ -205,14 +205,26 @@ impl GetDataLocations for WhatsMinerV1 {
tag: None,
},
)],
DataField::Hashboards => vec![(
RPC_DEVS,
DataExtractor {
func: get_by_pointer,
key: Some(""),
tag: None,
},
)],
DataField::Hashboards => vec![
(
RPC_DEVS,
DataExtractor {
func: get_by_pointer,
key: Some(""),
tag: None,
},
),
// Merge in summary so "Chip Data" (miner-wide chip marking) is
// available per board (round 19 #10); RPC_SUMMARY already fetched.
(
RPC_SUMMARY,
DataExtractor {
func: get_by_pointer,
key: Some("/SUMMARY/0"),
tag: None,
},
),
],
DataField::Pools => vec![(
RPC_POOLS,
DataExtractor {
@@ -436,6 +448,20 @@ impl GetHashboards for WhatsMinerV1 {
);
}
// Chip marking from the merged summary "Chip Data" (miner-wide, first
// token), applied to every board (round 19 #10).
let chip_type = hashboard_data
.pointer("/Chip Data")
.and_then(|v| v.as_str())
.and_then(|s| s.split_whitespace().next())
.filter(|s| !s.is_empty())
.map(str::to_string);
if chip_type.is_some() {
for board in hashboards.iter_mut() {
board.chip_type = chip_type.clone();
}
}
hashboards
}
}
@@ -992,6 +1018,12 @@ mod integration_tests {
assert_eq!(shares.difficulty_rejected, Some(0.0));
assert_eq!(shares.stale_shares, Some(0));
assert_eq!(shares.found_blocks, Some(0));
// Chip marking from summary "Chip Data" first token (round 19 #10).
assert!(!miner_data.hashboards.is_empty());
assert_eq!(
miner_data.hashboards[0].chip_type.as_deref(),
Some("HP5A01-19101436")
);
assert_eq!(miner_data.wattage, Some(Power::from_watts(3417f64)));
assert_eq!(
miner_data.tuning_target,
+34 -8
View File
@@ -216,14 +216,26 @@ impl GetDataLocations for WhatsMinerV2 {
tag: None,
},
)],
DataField::Hashboards => vec![(
RPC_DEVS,
DataExtractor {
func: get_by_pointer,
key: Some(""),
tag: None,
},
)],
DataField::Hashboards => vec![
(
RPC_DEVS,
DataExtractor {
func: get_by_pointer,
key: Some(""),
tag: None,
},
),
// Merge in summary so "Chip Data" (miner-wide chip marking) is
// available per board (round 19 #10); RPC_SUMMARY already fetched.
(
RPC_SUMMARY,
DataExtractor {
func: get_by_pointer,
key: Some("/SUMMARY/0"),
tag: None,
},
),
],
DataField::Pools => vec![(
RPC_POOLS,
DataExtractor {
@@ -433,6 +445,20 @@ impl GetHashboards for WhatsMinerV2 {
);
}
// Chip marking from the merged summary "Chip Data" (miner-wide, first
// token), applied to every board (round 19 #10).
let chip_type = hashboard_data
.pointer("/Chip Data")
.and_then(|v| v.as_str())
.and_then(|s| s.split_whitespace().next())
.filter(|s| !s.is_empty())
.map(str::to_string);
if chip_type.is_some() {
for board in hashboards.iter_mut() {
board.chip_type = chip_type.clone();
}
}
hashboards
}
}
@@ -459,6 +459,19 @@ impl GetHashboards for WhatsMinerV3 {
.map(|h| h.value > 0.0)
.unwrap_or(false),
);
// Chip marking (per-board chipdataN, first token) + hashboard model
// (miner-wide hash-board, e.g. "K40") from get.device.info (round 19 #10).
board.chip_type = hashboard_data
.pointer(&format!("/chipdata{idx}"))
.and_then(|v| v.as_str())
.and_then(|s| s.split_whitespace().next())
.filter(|s| !s.is_empty())
.map(str::to_string);
board.hashboard_model = hashboard_data
.pointer("/hash-board")
.and_then(|v| v.as_str())
.filter(|s| !s.is_empty())
.map(str::to_string);
}
hashboards
@@ -1241,6 +1254,17 @@ mod integration_tests {
assert!(miner_data.is_mining);
assert_eq!(miner_data.fans.len(), 2);
assert_eq!(miner_data.pools[0].len(), 3);
// Chip marking (chipdataN first token) + hashboard model (hash-board);
// round 19 #10.
assert!(!miner_data.hashboards.is_empty());
assert_eq!(
miner_data.hashboards[0].chip_type.as_deref(),
Some("K8EC374-2426")
);
assert_eq!(
miner_data.hashboards[0].hashboard_model.as_deref(),
Some("K40")
);
Ok(())
}