Issue #41: installing alkane OS and restoring to stock no longer require typing FLASH. The dialog, the board list and the Install/Restore button are the confirmation; the destructive-action warning stays visible. Removes the now-unused confirm inputs from the install and uninstall dialogs. Report relay: raise RATE_PER_IP 5 -> 100 and RATE_GLOBAL 60 -> 300 so bench testing can file more reports without hitting the hourly cap. Applied live on the Gitea host and recorded here. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01B1W6qKwKxq3oUPDKWicM6i
Alkane Toolkit
The badges link to the project site: the manual, the code-quality dashboard (how the grade is set, coverage by crate and file) and the benchmark history.
Desktop miner discovery and monitoring. The Rust GUI uses wxWidgets through a patched wx-rs bridge. In-app image flashing is disabled while that path is reworked.
Run locally
scripts/build-wx-linux.sh
scripts/build-gui-linux.sh
ALKANE_FAKE_SCAN=1 ~/.cache/alkane-tk-target/release/alkane-toolkit
The first command builds wxWidgets 3.3.3 once. Linux needs GTK 3. Fake scan uses offline fixtures and does not contact hardware.
Windows 10/11 builds are cross-compiled on Linux (scripts/build-wx-windows.sh,
then scripts/build-gui-windows.sh) and attached to every release as a
self-contained alkane-toolkit.exe; see docs/windows.md.
macOS builds run on a Mac (scripts/build-wx-macos.sh, then
scripts/build-gui-macos.sh) and produce one universal app for Apple Silicon
and Intel, macOS 11 or later; see docs/macos.md.
Current scope
- Discover miners by CIDR or IP range with vendored asic-rs.
- Show model, firmware, health, hashrate, temperatures, fans, PSU, and workers.
- Filter and sort the desktop table; inspect probes with
miner_probe. - Use controls supported by the selected firmware and restore supported aftermarket firmware to stock.
Discovery is read-only. Control and restore actions change miners. Check the selected devices before applying them.
Headless .afw install (CV1835 and AM335x)
alkane-cli is the headless engine; the GUI uses the same engine. A verified
.afw is a full OS bundle for exactly one board. The CV1835 installer writes
only /dev/mmcblk0p1 over SSH, holds the current p1 first, reads the whole
partition back, and reboots only after the read-back matches.
The AM335x installer writes mtd8 (type-3 ramdisk), mtd6 (dtb) and mtd7
(legacy kernel uImage) with flash_erase + nandwrite. It never touches
mtd0-5 (SPL/U-Boot/bootenv), holds a backup of each target before writing it,
and reads every target back before reboot. Its verify-live checks SSH
(kernel string), the HTTP marker on port 80, the API on port 4028, and the
eth0 DHCP lease.
alkane-cli afw verify BUNDLE.afw --allow-unsigned
alkane-cli afw plan BUNDLE.afw --host 10.255.1.167
alkane-cli afw preflight BUNDLE.afw --host 10.255.1.167
alkane-cli afw install BUNDLE.afw --host 10.255.1.167 --dry-run
alkane-cli afw install BUNDLE.afw --host 10.255.1.167 --confirm FLASH
alkane-cli afw verify-live BUNDLE.afw --host 10.255.1.167
alkane-cli afw restore --host 10.255.1.167 --held-backup p1.img --confirm FLASH
For AM335x the same subcommands infer the board from the bundle; restore names the three held copies explicitly:
alkane-cli afw plan BUNDLE.afw --host 10.255.1.64
alkane-cli afw preflight BUNDLE.afw --host 10.255.1.64
alkane-cli afw install BUNDLE.afw --host 10.255.1.64 --dry-run
alkane-cli afw install BUNDLE.afw --host 10.255.1.64 --confirm FLASH
alkane-cli afw verify-live BUNDLE.afw --host 10.255.1.64 --timeout 300
alkane-cli afw restore --board am335x --host 10.255.1.64 \
--held-backup mtd8.img --held-kernel mtd7.img --held-dtb mtd6.img --confirm FLASH
On stock Bitmain CV1835 the SSH login is the unprivileged miner account; the
toolkit obtains root through the stock update-daemon loopback channel, not a
serial console. Credentials come only from ALKANE_BOARD_PASSWORD or
ALKANE_BOARD_PASSWORD_FILE, or from --password-file / --identity-file.
No credential value is printed. --allow-unsigned is bench-only; site use
needs an Ed25519-signed bundle.
Development
WX_RS_WXCONFIG="$HOME/.cache/wx-3.3.3-linux/bin/wx-config" \
CARGO_TARGET_DIR="$HOME/.cache/alkane-tk-target" \
cargo test -p alkane-gui --offline
Keep build output off the source share. main runs full CI and publishes
qualifying releases; next builds -rc candidates. Badges measure host
code, not installation support. See the
benchmark history.
Firmware safety
Installation must follow the SDK install rules: use the exact board's packer and boot-switch procedure, verify through an independent channel, and never write bootloader or secure regions.
License
MIT. Vendored dependencies keep their own terms.