The Linux 6.18.46 forward-port boots on the panel through our ported drivers,
verified on the serial console: earlycon, arch timer (BogoMIPS calibrated), our
clk-rv1106 CRU, pinctrl, and the mainline 8250 bound to uart2 clocked by our CRU
(ttyS2 16550A), then rootfs mount.
Two DT fixes got it past "Starting kernel":
- fdt placed high (load=0x08000000) so the bloated multi_v7 zImage (~20 MiB
decompressed) stops overrunning the DTB at 0xc00000 (was: r2=0, "invalid dtb").
- added the rockchip,rv1106-grf-cru node (grf-clock-controller child of grf) so
clk-rv1106's grf_ctx isn't NULL (was: panic in rockchip_clk_register_branches).
Console pinned to 115200 (readable on the CP2102 bench adapter; prod uses 1.5M).
The boot-image format and the A/B _b-slot safe-test method (which auto-reverted to
_a on every failed attempt) are in docs/m2-boot-on-c8a3.md. M3 next: lean defconfig
+ dw_mmc DT + our Buildroot userspace rebuilt on 6.18.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017wB8KB3MMQztRDXCMCkPrf
Per [maintainer]: forward-port the RV1106 SoC enablement from the vendor 5.10 tree to
6.18 LTS ourselves (no plan44), on our Buildroot. Verified mainline has ZERO
RV1106 support, so this is a whole-BSP port. docs/bringup.md = the console-first
milestone plan + method (sibling-delta from rv1126/rv1108, which exist in both
trees). M1 (clk driver) underway: gcc-8.3 builds 6.18; wired CLK_RV1106; ported
55 CRU macros + the panic_notifier header split + the armclk signature change
(flagged PORT-VERIFY for the CPU-mux, TRM-check needed). Captured in
rv1106-enablement/. Honest: first of ~120 files; multi-month effort.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017wB8KB3MMQztRDXCMCkPrf
