BFE EngineeringandClaude Haiku 5.5 ccf9359e31 Revert CPLL 900 MHz pin: render check missed [skip ci]
Decision pass 3 (2026-11-06) says that any miss in the .52 30-minute UI
check reverts the CPLL change to 1000 MHz and returns the item to the
orchestrator. The check ran on 2026-11-11 with flare-edge 201f74f9c
(candidate, pins feb66fd) against 4923dc4cc (baseline, pre-change pin).
The two flare-edge commits differ only in the vendor/warden-sdk pin.
Recomputed from the four 30-minute CSVs (two runs per image):

- render_ms mean: 12.33 and 12.48 ms (candidate) against 12.70 and
  12.79 ms (baseline): better.
- render_max top-10 mean: 56.44 and 56.32 ms against 50.11 and 55.20 ms:
  worse in both runs.
- frames above 50 ms: 7 and 8 against 4 and 6: worse.
- worst frame: 69.47 and 78.00 ms against 59.85 and 76.32 ms: worse.
- dmesg: 34 lines before and 34 after each run, so no new DDR, AXI,
  VOP or RGA lines.

The tail metrics miss the decision's "no worse" rule. This commit
restores the upstream cru assigned-clocks in
patches/20-arch-dts-bindings.patch (PLL_CPLL 1000 MHz, no 50, 100 or
30 MHz pins) and removes the static clock-plan check added by feb66fd.
The bench helpers from 97903d5 stay. Panels .52 to .56 already run the
pre-change clock (dclk_vop 31250000 Hz, read 2026-11-13), so no bench
revert is needed.

Re-apply feb66fd to test the 900 MHz plan again if the orchestrator
accepts the tail tradeoff.

Refs bfe-core1106-sdk#43
Refs flare-edge#3204 (GIC 121 leg still open)

Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01B1W6qGNpGNtFT7nhShpH56
2026-11-13 20:09:56 -06:00
2026-08-30 07:44:32 -06:00

bfe-core1106-sdk

ci Lines of code Tests Coverage Code quality

A modern, open development environment for the Luckfox Pico 86 Panel (Rockchip RV1106), replacing the vendor SDK, and honest about what runs on real silicon versus what is simulated.

Vendor SDK This repo
Kernel 5.10.160, twice-forked, frozen 6.18.46: a reviewable, subsystem-split patch series onto pristine upstream; full peripheral set (display, touch, wifi, audio, NPU, ...) hardware-verified on a bench panel
Build ~2 GB tree, absolute paths baked in, Kconfig options silently dropped one hermetic script: sha256-pinned source fetch, fail-closed patch apply and config fragments
Off-device testing none; every change means flashing a panel register-level hardware models (sim/) plus a QEMU device VM booting the real kernel, real daemons, and the real UI with display + touch
Config safety memory-map mistakes reach hardware (one bricked a bench unit) static gates (tools/config-lint) catch them before any flash
CI none hosted pipeline: tests, coverage, benchmarks, patch-apply gate, kernel build with an in-CI QEMU boot smoke
Flashing tools closed (upgrade_tool) open (rkdeveloptool)
License mixed GPL-2.0-only, with a per-driver provenance ledger

Quick Start

Requirements: gcc-arm-linux-gnueabihf, qemu-system-arm, curl, cpio, mkfs.ext4, a bare python on PATH (Debian/Ubuntu: python-is-python3), gcc >= 14 (driver harnesses), and Rust (for the simulators' tests).

# 1. Build the kernel: fetch pinned pristine 6.18.46, apply patches/, emit
#    zImage + rv1106-warden.dtb. WORK must sit outside any git checkout.
WORK=$HOME/kbuild-out CROSS_COMPILE=arm-linux-gnueabihf- bash build/build-kernel.sh

# 2. Boot it in the QEMU device simulator (no hardware needed):
bash qemu/mkinitramfs.sh
bash qemu/mkimage.sh
bash qemu/run.sh --kernel $HOME/kbuild-out/linux-6.18.46/arch/arm/boot/zImage --shell

# 3. Run the test suites:
for d in sim tools/config-lint qemu/rs485-bridge; do
  (cd "$d" && cargo test)
done
for d in drivers/*/test; do make -C "$d" check; done  # driver harnesses (gcc >= 14)

Add WARDEN_KCONFIG_FRAGMENT=qemu/configs/virt.fragment to step 1 for the kernel variant with the simulator's extra devices; qemu/README.md has the scenario tests (portal, OTA apply, display + touch, watchdog).

Every kernel symbol the platform needs is listed in build/required-symbols.txt (and build/probe-symbols.txt for a symbol under test). build-kernel.sh asserts both against the final .config, because olddefconfig drops an unknown or unsatisfied symbol without a word. WARDEN_CONFIG_ONLY=1 CONFIG_OUT=<file> stops after that assertion, so the gate takes seconds; <file>.sha256 holds the digest of the final .config that firmware images record as KCONFIG_SHA256.

Layout

Directory Contents
patches/ the RV1106 forward-port onto pristine linux-6.18.46, subsystem-split
luckfox-sdk-patches/ the delta against the legacy vendor Luckfox SDK (U-Boot 2017.09, optionally the vendor 5.10.160 kernel, wifi driver, board build, buildroot) -- moved from blueflare/flare-edge's sdk-patches/ on 2026-09-15; unrelated to patches/ above
build/ hermetic kernel build: pinned fetch -> apply patches -> zImage + dtb; vendor.manifest pins the third-party trees this platform builds against (LVGL, the vendor RV1106 SDK) to exact commits, and fetch-vendor.sh obtains and verifies them
qemu/ device simulator: QEMU -M virt boots the real kernel and real userspace
sim/ register-level hardware models (Rust): membus, HPMCU, CRU, Modbus, RGA, NPU
drivers/ hardened hardware-facing drivers: HAL seams, test harnesses
kernel/ forward-port provenance and bring-up records (patches/ is canonical)
tools/ config-lint (static memory-map gates) and dev tooling
docs/ architecture, ADRs (decisions/), CI/CD

Architecture

One thin hardware abstraction seam per block (a trait in Rust, a function table in C): firmware logic talks to the seam; the seam binds a real backend on the device or a simulated backend on the host. The driver test harnesses measure against the same seam the simulator implements, so the two reinforce each other. Full detail: docs/architecture.md.

Simulator Runs Proves
sim/ register-level Rust models driver and supervisor logic, with fault injection
qemu/ the real kernel + userspace on -M virt boot, init, daemons, networking, OTA, watchdog, display + touch
lvglsim (downstream) the LVGL UI on SDL rendering and UI flows

With the production UI binary in qemu/payload/, run.sh --display on opens the panel's 720x720 screen in a window, mouse clicks landing as touch: device and UI in one VM. Emulation results are never on-silicon evidence; the simulators narrow which claims need a panel.

Principles

  • Open: open tools over closed ones; GPL-2.0-only.
  • Hard: every seam has a fault-injection path; recovery code is tested against failure, not just success.
  • Modern: the newest kernel the hardware can run, current toolchains, Rust for new host-testable code, reproducible builds.

License

GPL-2.0-only, repo-wide (LICENSE; a per-file SPDX identifier governs where present). patches/ and kernel/ are derivative of the Linux kernel and GPL-2.0 vendor code; per-driver origin is tracked in kernel/rv1106-enablement/PROVENANCE.md. Contributions are accepted under the same license (inbound = outbound).

S
Description
No description provided
Readme GPL-2.0
2.9 MiB
Languages
C 52%
Rust 22.9%
Shell 15.9%
Python 4.2%
Makefile 2.4%
Other 2.6%