BFE EngineeringandClaude Fable 5
c7e06514ad
Phase 3 of the device sim, all verified on QEMU 10.0.11: - qemu/rs485-bridge/: std-only crate bridging a QEMU serial chardev (unix socket) to warden_sim::ModbusSlave — gap-based RTU framing (CRC failures degrade to real-slave silence), line-protocol control socket for register seeding and fault injection (drop/exception/clear), bounds-checked so a scenario typo answers err instead of panicking the bus. 7 unit tests, bench in the sim_bench pattern. Verified end-to-end: guest master frame on /dev/ttyS4 (pci-serial) answered from the sim slave, CRC-correct. - virt machine gains highmem=off: the 32-bit non-LPAE kernel cannot reach virt's default 40-bit PCIe ECAM (pci-host-generic EOVERFLOW); with it the full PCI set probes (16550A ttyS0, i6300esb). - Watchdog scenario verified: guest arms /dev/watchdog, no petting, i6300esb resets the VM ~30s later (first environment where this arm is testable). - qemu/tests/portal-scenario.sh: the real static-musl warden-flared inside the VM against flare-edge's mock portal on the host — authenticated check-in, firmware desired-state pull, and download of a real signed tier-1 .wfw offer, asserted from the portal log. Found and filed flare-edge#106 (fatal SIGBUS in the HPMCU boot-loaded probe on non-RV1106 memory maps); runs against a flared built from the qemu-vm-support fix branch. - stage-2 init: WARDEN_FLARE_INSECURE=1 + WARDEN_HPMCU=0 (documented VM deviations), firmware-version stamp, newline-terminated state seeds. - CI: rs485-bridge joins the test loop and bench job; new qemu-tools job (shellcheck + initramfs + disk image on hosted runners); kernel-build gains a fail-closed qemu boot-smoke step. All qemu scripts shellcheck-clean. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_018HUayid7W5w7jBdb9Rrj1K
88 lines
3.1 KiB
Plaintext
Executable File
88 lines
3.1 KiB
Plaintext
Executable File
#!/bin/busybox sh
|
|
# Stage-2 init: PID 1 on the disk rootfs (rootfs_a or rootfs_b), reached via
|
|
# switch_root from the initramfs. Brings up the minimum a WardenOS userspace
|
|
# needs — mounts, by-name symlinks, network, serial alias — then starts any
|
|
# payload daemons and holds. This stands in for the device's BusyBox SysV
|
|
# /etc/init.d/S* sequence; it is deliberately tiny, not a model of it.
|
|
|
|
/bin/busybox mount -t devtmpfs devtmpfs /dev 2>/dev/null
|
|
exec </dev/console >/dev/console 2>&1
|
|
/bin/busybox --install -s /bin
|
|
|
|
mount -t proc proc /proc
|
|
mount -t sysfs sysfs /sys
|
|
mount -t tmpfs tmpfs /tmp
|
|
|
|
# Fresh devtmpfs — repopulate the by-name contract (slotctl.rs depends on it).
|
|
mkdir -p /dev/block/by-name
|
|
for uev in /sys/class/block/vda*/uevent; do
|
|
[ -f "$uev" ] || continue
|
|
partname=""
|
|
devname=""
|
|
while IFS='=' read -r k v; do
|
|
case "$k" in
|
|
PARTNAME) partname="$v" ;;
|
|
DEVNAME) devname="$v" ;;
|
|
esac
|
|
done < "$uev"
|
|
[ -n "$partname" ] && [ -n "$devname" ] \
|
|
&& ln -sf "/dev/$devname" "/dev/block/by-name/$partname"
|
|
done
|
|
|
|
# Slot (whole-token parse, same rule as stage 1).
|
|
slot="_a"
|
|
for tok in $(cat /proc/cmdline); do
|
|
case "$tok" in
|
|
warden.slot=*) slot="${tok#warden.slot=}" ;;
|
|
esac
|
|
done
|
|
|
|
# The device's matched mounts: persistent state and the slot's oem partition.
|
|
mount -t ext4 /dev/block/by-name/userdata /userdata || echo "init: userdata mount failed"
|
|
mount -t ext4 "/dev/block/by-name/oem${slot}" /oem || echo "init: oem${slot} mount failed"
|
|
mkdir -p /userdata/warden
|
|
|
|
# RS485: warden-modbus hardcodes /dev/ttyS4 at compile time; alias it to the
|
|
# VM's pci-serial UART when one is present (needs the virt.fragment kernel).
|
|
[ -c /dev/ttyS0 ] && ln -sf /dev/ttyS0 /dev/ttyS4
|
|
|
|
# Network: slirp user-mode net on eth0 (DHCP, fallback to QEMU's static map).
|
|
ip link set lo up
|
|
if [ -e /sys/class/net/eth0 ]; then
|
|
ip link set eth0 up
|
|
if ! udhcpc -i eth0 -n -q -t 5 -T 2 >/dev/null 2>&1; then
|
|
ip addr add 10.0.2.15/24 dev eth0 2>/dev/null
|
|
ip route replace default via 10.0.2.2 dev eth0
|
|
echo "nameserver 10.0.2.3" > /etc/resolv.conf
|
|
fi
|
|
fi
|
|
|
|
hostname warden-qemu
|
|
|
|
echo "WARDEN-QEMU-ROOTFS-OK slot=${slot}"
|
|
|
|
# Payload daemons (dropped into /usr/bin by qemu/mkimage.sh from qemu/payload/).
|
|
# WARDEN_FLARE_INSECURE=1: the VM's portal is the desk mock over plain HTTP.
|
|
# This is a dev instrument — a production device build never sets it.
|
|
export WARDEN_FLARE_INSECURE=1
|
|
# No HPMCU on -M virt: the mailbox SRAM (0xff6fff00) is unmapped bus space
|
|
# here, and flared's /dev/mem poke dies with an external abort (SIGBUS). The
|
|
# SCR1 supervisor state machine is modeled in sim/src/hpmcu.rs instead.
|
|
export WARDEN_HPMCU=0
|
|
for d in /usr/bin/warden-flared /usr/bin/warden-modbus; do
|
|
if [ -x "$d" ]; then
|
|
name="$(basename "$d")"
|
|
echo "init: starting $name"
|
|
"$d" > "/tmp/${name}.log" 2>&1 &
|
|
fi
|
|
done
|
|
|
|
if grep -qw warden.shell /proc/cmdline; then
|
|
echo "warden.shell: interactive shell (exit powers off)"
|
|
setsid cttyhack sh
|
|
poweroff -f
|
|
fi
|
|
|
|
# Hold: daemons run, console idles, scenarios drive the VM from outside.
|
|
while :; do sleep 3600; done
|